On Mon, Feb 19, 2024 at 1:18 PM Anand Jain <anand.jain@xxxxxxxxxx> wrote:
>
> On 2/15/24 18:33, Filipe Manana wrote:
> > On Thu, Feb 15, 2024 at 6:35 AM Anand Jain <anand.jain@xxxxxxxxxx> wrote:
> >>
> >> Make sure that basic functions such as seeding and device add fail,
> >> while balance runs successfully with tempfsid.
> >>
> >> Signed-off-by: Anand Jain <anand.jain@xxxxxxxxxx>
> >> ---
> >> common/filter.btrfs | 6 ++++
> >> tests/btrfs/315 | 79 +++++++++++++++++++++++++++++++++++++++++++++
> >> tests/btrfs/315.out | 11 +++++++
> >> 3 files changed, 96 insertions(+)
> >> create mode 100755 tests/btrfs/315
> >> create mode 100644 tests/btrfs/315.out
> >>
> >> diff --git a/common/filter.btrfs b/common/filter.btrfs
> >> index 8ab76fcb193a..d48e96c6f66b 100644
> >> --- a/common/filter.btrfs
> >> +++ b/common/filter.btrfs
> >> @@ -68,6 +68,12 @@ _filter_btrfs_device_stats()
> >> sed -e "s/ *$NUMDEVS /<NUMDEVS> /g"
> >> }
> >>
> >> +_filter_btrfs_device_add()
> >> +{
> >> + _filter_scratch_pool | \
> >> + sed -E 's/\(([0-9]+(\.[0-9]+)?)[a-zA-Z]+B\)/\(NUM\)/'
> >
> > Why do we need this new filter?
> > We are testing for a failure, where none of this is relevant except
> > filtering device names.
> >
>
> 2nd part filters out the size part as seen in the raw
> btrfs device add output below.
>
> $ btrfs device add /dev/sdb2 /btrfs
> Performing full device TRIM /dev/sdb2 (731.00MiB) ...
>
> I will add a comment.
So that means the test will fail the golden output if the device does
not support trim,
as in that case progs does not do the trim.
That line about performing TRIM must be filtered out. Replacing the
size with NUM is irrelevant.
Thanks.
>
> > The test can just filter with _filter_scratch_pool only.
> >
> >> +}
> >> +
> >> _filter_transaction_commit() {
> >> sed -e "/Transaction commit: none (default)/d" \
> >> -e "s/Delete subvolume [0-9]\+ (.*commit):/Delete subvolume/g" \
> >> diff --git a/tests/btrfs/315 b/tests/btrfs/315
> >> new file mode 100755
> >> index 000000000000..7ad0dfbc9c32
> >> --- /dev/null
> >> +++ b/tests/btrfs/315
> >> @@ -0,0 +1,79 @@
> >> +#! /bin/bash
> >> +# SPDX-License-Identifier: GPL-2.0
> >> +# Copyright (c) 2024 YOUR NAME HERE. All Rights Reserved.
> >> +#
> >> +# FS QA Test 315
> >> +#
> >> +# Verify if the seed and device add to a tempfsid filesystem fails.
> >> +#
> >> +. ./common/preamble
> >> +_begin_fstest auto quick volume seed tempfsid
> >> +
> >> +_cleanup()
> >> +{
> >> + cd /
> >> + umount $tempfsid_mnt 2>/dev/null
> >
> > $UMOUNT_PROG
> >
>
> got it.
>
> >> + rm -r -f $tmp.*
> >> + rm -r -f $tempfsid_mnt
> >> +}
> >> +
> >> +. ./common/filter.btrfs
> >> +
> >> +_supported_fs btrfs
> >> +_require_btrfs_sysfs_fsid
> >> +_require_scratch_dev_pool 3
> >> +_require_btrfs_fs_feature temp_fsid
> >> +_require_btrfs_command inspect-internal dump-super
> >> +_require_btrfs_mkfs_uuid_option
> >> +
> >> +_scratch_dev_pool_get 3
> >> +
> >> +# mount point for the tempfsid device
> >> +tempfsid_mnt=$TEST_DIR/$seq/tempfsid_mnt
> >> +
> >> +seed_device_must_fail()
> >> +{
> >> + echo ---- $FUNCNAME ----
> >> +
> >> + mkfs_clone ${SCRATCH_DEV} ${SCRATCH_DEV_NAME[1]}
> >> +
> >> + $BTRFS_TUNE_PROG -S 1 ${SCRATCH_DEV}
> >> + $BTRFS_TUNE_PROG -S 1 ${SCRATCH_DEV_NAME[1]}
> >> +
> >> + _scratch_mount 2>&1 | _filter_scratch
> >> + _mount ${SCRATCH_DEV_NAME[1]} ${tempfsid_mnt} 2>&1 | _filter_test_dir
> >> +}
> >> +
> >> +device_add_must_fail()
> >> +{
> >> + echo ---- $FUNCNAME ----
> >> +
> >> + mkfs_clone ${SCRATCH_DEV} ${SCRATCH_DEV_NAME[1]}
> >> + _scratch_mount
> >> + _mount ${SCRATCH_DEV_NAME[1]} ${tempfsid_mnt}
> >> +
> >> + $XFS_IO_PROG -fc 'pwrite -S 0x61 0 9000' $SCRATCH_MNT/foo | \
> >> + _filter_xfs_io
> >> +
> >> +$BTRFS_UTIL_PROG device add -f ${SCRATCH_DEV_NAME[2]} ${tempfsid_mnt} 2>&1 |\
> >> + _filter_btrfs_device_add
> >
> > We are testing for failure, so no need for the new filter
> > _filter_btrfs_device_add.
> > Just filter through _filter_scratch_pool here and nothing more.
> >
>
> As shown above, we need to filter out the size part too.
>
> Thanks, Anand
>
> > Thanks.
> >
> >> +
> >> + echo Balance must be successful
> >> + _run_btrfs_balance_start ${tempfsid_mnt}
> >> +}
> >> +
> >> +mkdir -p $tempfsid_mnt
> >> +
> >> +seed_device_must_fail
> >> +
> >> +_scratch_unmount
> >> +_cleanup
> >> +mkdir -p $tempfsid_mnt
> >> +
> >> +device_add_must_fail
> >> +
> >> +_scratch_dev_pool_put
> >> +
> >> +# success, all done
> >> +status=0
> >> +exit
> >> diff --git a/tests/btrfs/315.out b/tests/btrfs/315.out
> >> new file mode 100644
> >> index 000000000000..32149972beb4
> >> --- /dev/null
> >> +++ b/tests/btrfs/315.out
> >> @@ -0,0 +1,11 @@
> >> +QA output created by 315
> >> +---- seed_device_must_fail ----
> >> +mount: SCRATCH_MNT: WARNING: source write-protected, mounted read-only.
> >> +mount: TEST_DIR/315/tempfsid_mnt: mount(2) system call failed: File exists.
> >> +---- device_add_must_fail ----
> >> +wrote 9000/9000 bytes at offset 0
> >> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> >> +ERROR: error adding device 'SCRATCH_DEV': Invalid argument
> >> +Performing full device TRIM SCRATCH_DEV (NUM) ...
> >> +Balance must be successful
> >> +Done, had to relocate 3 out of 3 chunks
> >> --
> >> 2.39.3
> >>
> >>
>
