[BUG]
When running btrfs/016 after any other test case, it would fail on a
SELinux enabled environment:
btrfs/015 1s ... 0s
btrfs/016 1s ... [failed, exit status 1]- output mismatch (see ~/xfstests-dev/results//btrfs/016.out.bad)
--- tests/btrfs/016.out 2023-12-28 10:39:36.481027970 +1030
+++ ~/xfstests-dev/results//btrfs/016.out.bad 2023-12-28 15:53:10.745436664 +1030
@@ -1,2 +1,3 @@
QA output created by 016
-Silence is golden
+fssum failed
+(see ~/xfstests-dev/results//btrfs/016.full for details)
...
(Run 'diff -u ~/xfstests-dev/tests/btrfs/016.out ~/xfstests-dev/results//btrfs/016.out.bad' to see the entire diff)
Ran: btrfs/015 btrfs/016
Failures: btrfs/016
Failed 1 of 2 tests
[CAUSE]
The test case itself would try to use a blank SELinux context for the
SCRATCH_MNT, to control the xattrs.
But the initial send stream is generated from $TEST_DIR, which may still
have the default SELinux mount context.
And such mismatch in the SELinux xattr (source on $TEST_DIR still has
the extra xattr, meanwhile the receve end on $SCRATCH_MNT doesn't) would
lead to above mismatch.
[FIX]
Fix the false alerts by disable XATTR checks.
Furthermore instead of doing all the edge juggling using $TEST_DIR, this
time we do all the work on $SCRATCH_MNT.
This means we would generate the initial send stream from $SCRATCH_MNT,
then reformat the fs, mount scratch again, receive and verify.
We no longer needs to cleanup the extra file for the initial send
stream, as they are on the scratch device and would be formatted anyway.
Signed-off-by: Qu Wenruo <wqu@xxxxxxxx>
---
Changelog:
v2:
- Add -T option to avoid xattrs checks
Since this test case is only verify the hole punching behavior, XATTR
is not our interest.
---
tests/btrfs/016 | 53 ++++++++++++++++++++-----------------------------
1 file changed, 22 insertions(+), 31 deletions(-)
diff --git a/tests/btrfs/016 b/tests/btrfs/016
index 35609329..37119363 100755
--- a/tests/btrfs/016
+++ b/tests/btrfs/016
@@ -12,58 +12,48 @@ _begin_fstest auto quick send prealloc
tmp=`mktemp -d`
tmp_dir=send_temp_$seq
-# Override the default cleanup function.
-_cleanup()
-{
- $BTRFS_UTIL_PROG subvolume delete $TEST_DIR/$tmp_dir/snap > /dev/null 2>&1
- $BTRFS_UTIL_PROG subvolume delete $TEST_DIR/$tmp_dir/snap1 > /dev/null 2>&1
- $BTRFS_UTIL_PROG subvolume delete $TEST_DIR/$tmp_dir/send > /dev/null 2>&1
- rm -rf $TEST_DIR/$tmp_dir
- rm -f $tmp.*
-}
-
# Import common functions.
. ./common/filter
# real QA test starts here
_supported_fs btrfs
-_require_test
_require_scratch
_require_fssum
_require_xfs_io_command "falloc"
_scratch_mkfs > /dev/null 2>&1
-
-#receive needs to be able to setxattrs, including the selinux context, if we use
-#the normal nfs context thing it screws up our ability to set the
-#security.selinux xattrs so we need to disable this for this test
-export SELINUX_MOUNT_OPTIONS=""
-
_scratch_mount
-mkdir $TEST_DIR/$tmp_dir
-$BTRFS_UTIL_PROG subvolume create $TEST_DIR/$tmp_dir/send \
+mkdir $SCRATCH_MNT/$tmp_dir
+$BTRFS_UTIL_PROG subvolume create $SCRATCH_MNT/$tmp_dir/send \
> $seqres.full 2>&1 || _fail "failed subvolume create"
-_ddt of=$TEST_DIR/$tmp_dir/send/foo bs=1M count=10 >> $seqres.full \
+_ddt of=$SCRATCH_MNT/$tmp_dir/send/foo bs=1M count=10 >> $seqres.full \
2>&1 || _fail "dd failed"
-$BTRFS_UTIL_PROG subvolume snapshot -r $TEST_DIR/$tmp_dir/send \
- $TEST_DIR/$tmp_dir/snap >> $seqres.full 2>&1 || _fail "failed snap"
-$XFS_IO_PROG -c "fpunch 1m 1m" $TEST_DIR/$tmp_dir/send/foo
-$BTRFS_UTIL_PROG subvolume snapshot -r $TEST_DIR/$tmp_dir/send \
- $TEST_DIR/$tmp_dir/snap1 >> $seqres.full 2>&1 || _fail "failed snap"
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/$tmp_dir/send \
+ $SCRATCH_MNT/$tmp_dir/snap >> $seqres.full 2>&1 || _fail "failed snap"
+$XFS_IO_PROG -c "fpunch 1m 1m" $SCRATCH_MNT/$tmp_dir/send/foo
+$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT/$tmp_dir/send \
+ $SCRATCH_MNT/$tmp_dir/snap1 >> $seqres.full 2>&1 || _fail "failed snap"
-$FSSUM_PROG -A -f -w $tmp/fssum.snap $TEST_DIR/$tmp_dir/snap >> $seqres.full \
+# -A disable access time check.
+# And -T disable xattrs to prevent SELinux changes causing false alerts, and the
+# test case only cares about hole punching.
+$FSSUM_PROG -AT -f -w $tmp/fssum.snap $SCRATCH_MNT/$tmp_dir/snap >> $seqres.full \
2>&1 || _fail "fssum gen failed"
-$FSSUM_PROG -A -f -w $tmp/fssum.snap1 $TEST_DIR/$tmp_dir/snap1 >> $seqres.full \
+$FSSUM_PROG -AT -f -w $tmp/fssum.snap1 $SCRATCH_MNT/$tmp_dir/snap1 >> $seqres.full \
2>&1 || _fail "fssum gen failed"
-$BTRFS_UTIL_PROG send -f $tmp/send.snap $TEST_DIR/$tmp_dir/snap >> \
+$BTRFS_UTIL_PROG send -f $tmp/send.snap $SCRATCH_MNT/$tmp_dir/snap >> \
$seqres.full 2>&1 || _fail "failed send"
-$BTRFS_UTIL_PROG send -p $TEST_DIR/$tmp_dir/snap \
- -f $tmp/send.snap1 $TEST_DIR/$tmp_dir/snap1 \
+$BTRFS_UTIL_PROG send -p $SCRATCH_MNT/$tmp_dir/snap \
+ -f $tmp/send.snap1 $SCRATCH_MNT/$tmp_dir/snap1 \
>> $seqres.full 2>&1 || _fail "failed send"
+_scratch_unmount
+_scratch_mkfs > /dev/null 2>&1
+_scratch_mount
+
$BTRFS_UTIL_PROG receive -f $tmp/send.snap $SCRATCH_MNT >> $seqres.full 2>&1 \
|| _fail "failed recv"
$BTRFS_UTIL_PROG receive -f $tmp/send.snap1 $SCRATCH_MNT >> $seqres.full 2>&1 \
@@ -75,4 +65,5 @@ $FSSUM_PROG -r $tmp/fssum.snap1 $SCRATCH_MNT/snap1 >> $seqres.full 2>&1 \
|| _fail "fssum failed"
echo "Silence is golden"
-status=0 ; exit
+status=0
+exit
--
2.43.1
