Report generation currently involves reaching into a whole bunch of
globals for things like section name and start/end times. Pass these
through as explicit function parameters to avoid unintentional breakage.
One minor fix included is the default xunit error message, which used
$sequm instead of $seqnum.
Signed-off-by: David Disseldorp <ddiss@xxxxxxx>
---
check | 14 +++++++----
common/report | 64 +++++++++++++++++++++++++++++----------------------
2 files changed, 47 insertions(+), 31 deletions(-)
diff --git a/check b/check
index 2ea2920f..9d60df45 100755
--- a/check
+++ b/check
@@ -429,7 +429,9 @@ _wrapup()
if $showme && $needwrap; then
if $do_report; then
# $showme = all selected tests are notrun (no tries)
- _make_section_report "${#notrun[*]}" "0" "${#notrun[*]}"
+ _make_section_report "$section" "${#notrun[*]}" "0" \
+ "${#notrun[*]}" \
+ "$((sect_stop - sect_start))"
fi
needwrap=false
elif $needwrap; then
@@ -490,7 +492,9 @@ _wrapup()
fi
echo "" >>$tmp.summary
if $do_report; then
- _make_section_report "${#try[*]}" "${#bad[*]}" "${#notrun[*]}"
+ _make_section_report "$section" "${#try[*]}" \
+ "${#bad[*]}" "${#notrun[*]}" \
+ "$((sect_stop - sect_start))"
fi
needwrap=false
fi
@@ -733,7 +737,8 @@ function run_section()
bad+=("$seqnum")
fi
if $do_report && [[ ! $tc_status =~ ^(init|expunge)$ ]]; then
- _make_testcase_report "$prev_seq" "$tc_status"
+ _make_testcase_report "$section" "$seqnum" \
+ "$tc_status" "$((stop - start))"
fi
prev_seq="$seq"
@@ -937,7 +942,8 @@ function run_section()
bad+=("$seqnum")
fi
if $do_report && [[ ! $tc_status =~ ^(init|expunge)$ ]]; then
- _make_testcase_report "$prev_seq" "$tc_status"
+ _make_testcase_report "$section" "$seqnum" "$tc_status" \
+ "$((stop - start))"
fi
sect_stop=`_wallclock`
diff --git a/common/report b/common/report
index 2b8285d8..5ca41bc4 100644
--- a/common/report
+++ b/common/report
@@ -33,11 +33,11 @@ _xunit_add_property()
_xunit_make_section_report()
{
# xfstest:section ==> xunit:testsuite
- local tests_count="$1"
- local bad_count="$2"
- local notrun_count="$3"
- local sect_name=$section
- local sect_time=`expr $sect_stop - $sect_start`
+ local sect_name="$1"
+ local tests_count="$2"
+ local bad_count="$3"
+ local notrun_count="$4"
+ local sect_time="$5"
if [ $sect_name == '-no-sections-' ]; then
sect_name='global'
@@ -67,12 +67,10 @@ _xunit_make_section_report()
_xunit_make_testcase_report()
{
- local test_seq="$1"
- local test_status="$2"
- local test_time=`expr $stop - $start`
- local strip="$SRC_DIR/"
- local test_name=${test_seq#$strip}
- local sect_name=$section
+ local sect_name="$1"
+ local test_name="$2"
+ local test_status="$3"
+ local test_time="$4"
# TODO: other places may also win if no-section mode will be named like 'default/global'
if [ $sect_name == '-no-sections-' ]; then
@@ -86,8 +84,9 @@ _xunit_make_testcase_report()
"pass")
;;
"notrun")
- if [ -f $seqres.notrun ]; then
- local msg=`cat $seqres.notrun | encode_xml`
+ local notrun_file="${REPORT_DIR}/${test_name}.notrun"
+ if [ -f "$notrun_file" ]; then
+ local msg=`cat "$notrun_file" | encode_xml`
echo -e "\t\t<skipped message=\"$msg\" />" >> $report
else
echo -e "\t\t<skipped/>" >> $report
@@ -97,27 +96,31 @@ _xunit_make_testcase_report()
echo -e "\t\t<skipped/>" >> $report
;;
"fail")
+ local out_src="${SRC_DIR}/${test_name}.out"
+ local full_file="${REPORT_DIR}/${test_name}.full"
+ local dmesg_file="${REPORT_DIR}/${test_name}.dmesg"
+ local outbad_file="${REPORT_DIR}/${test_name}.out.bad"
if [ -z "$_err_msg" ]; then
- _err_msg="Test $sequm failed, reason unknown"
+ _err_msg="Test $test_name failed, reason unknown"
fi
echo -e "\t\t<failure message=\"$_err_msg\" type=\"TestFail\" />" >> $report
- if [ -s $seqres.full ]; then
+ if [ -s "$full_file" ]; then
echo -e "\t\t<system-out>" >> $report
printf '<![CDATA[\n' >>$report
- cat $seqres.full | tr -dc '[:print:][:space:]' | encode_xml >>$report
+ cat "$full_file" | tr -dc '[:print:][:space:]' | encode_xml >>$report
printf ']]>\n' >>$report
echo -e "\t\t</system-out>" >> $report
fi
- if [ -f $seqres.dmesg ]; then
+ if [ -f "$dmesg_file" ]; then
echo -e "\t\t<system-err>" >> $report
printf '<![CDATA[\n' >>$report
- cat $seqres.dmesg | tr -dc '[:print:][:space:]' | encode_xml >>$report
+ cat "$dmesg_file" | tr -dc '[:print:][:space:]' | encode_xml >>$report
printf ']]>\n' >>$report
echo -e "\t\t</system-err>" >> $report
- elif [ -s $seqres.out.bad ]; then
+ elif [ -s "$outbad_file" ]; then
echo -e "\t\t<system-err>" >> $report
printf '<![CDATA[\n' >>$report
- $diff $test_seq.out $seqres.out.bad | encode_xml >>$report
+ $diff "$out_src" "$outbad_file" | encode_xml >>$report
printf ']]>\n' >>$report
echo -e "\t\t</system-err>" >> $report
fi
@@ -134,13 +137,17 @@ _xunit_make_testcase_report()
# Common report generator entry points
_make_section_report()
{
- local tests_count="$1"
- local bad_count="$2"
- local notrun_count="$3"
+ local sect_name="$1"
+ local tests_count="$2"
+ local bad_count="$3"
+ local notrun_count="$4"
+ local sect_time="$5"
for report in $REPORT_LIST; do
case "$report" in
"xunit")
- _xunit_make_section_report "$tests_count" "$bad_count" "$notrun_count"
+ _xunit_make_section_report "$sect_name" "$tests_count" \
+ "$bad_count" "$notrun_count" \
+ "$sect_time"
;;
*)
_dump_err "format '$report' is not supported"
@@ -151,12 +158,15 @@ _make_section_report()
_make_testcase_report()
{
- local test_seq="$1"
- local test_status="$2"
+ local sect_name="$1"
+ local test_seq="$2"
+ local test_status="$3"
+ local test_time="$4"
for report in $REPORT_LIST; do
case "$report" in
"xunit")
- _xunit_make_testcase_report "$test_seq" "$test_status"
+ _xunit_make_testcase_report "$sect_name" "$test_seq" \
+ "$test_status" "$test_time"
;;
*)
_dump_err "report format '$report' is not supported"
--
2.35.3
