On Thu, Jun 02, 2022 at 10:31:19AM +1000, Dave Chinner wrote:
> From: Allison Henderson <allison.henderson@xxxxxxxxxx>
>
> This patch adds tests to exercise the log attribute error
> inject and log replay. These tests aim to cover cases where attributes
> are added, removed, and overwritten in each format (shortform, leaf,
> node). Error inject is used to replay these operations from the log.
>
> dchinner: sanitise md5sum input to just attr values.
> dchinner: correct md5sums.
> dchinner: ensure replace tests use different values so recovery can
> determine the replace was replayed correctly.
> dchinner: don't remove corpse in _cleanup - scratch devices don't
> require cleanup, and if the test fails we want to leave
> the broken state for post-mortem analysis.
> dchinner: only run on v5 filesystems.
>
> Signed-off-by: Allison Henderson <allison.henderson@xxxxxxxxxx>
> Signed-off-by: Catherine Hoang <catherine.hoang@xxxxxxxxxx>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
> ---
> tests/xfs/600 | 179 +++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/600.out | 188 ++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 367 insertions(+)
> create mode 100755 tests/xfs/600
> create mode 100644 tests/xfs/600.out
>
> diff --git a/tests/xfs/600 b/tests/xfs/600
> new file mode 100755
> index 00000000..0ff41e13
> --- /dev/null
> +++ b/tests/xfs/600
> @@ -0,0 +1,179 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2022, Oracle and/or its affiliates. All Rights Reserved.
> +#
> +# FS QA Test 600
> +#
> +# Log attribute replay test
> +#
> +. ./common/preamble
> +_begin_fstest auto quick attr
> +
> +# get standard environment, filters and checks
> +. ./common/filter
> +. ./common/attr
> +. ./common/inject
> +
> +_cleanup()
> +{
> + rm -rf $tmp.*
> + test -w /sys/fs/xfs/debug/larp && \
> + echo 0 > /sys/fs/xfs/debug/larp
> +}
> +
> +test_attr_replay()
> +{
> + testfile=$testdir/$1
> + attr_name=$2
> + attr_value=$3
> + flag=$4
> + error_tag=$5
> +
> + # Inject error
> + _scratch_inject_error $error_tag
> +
> + # Set attribute
> + echo "$attr_value" | ${ATTR_PROG} -$flag "$attr_name" $testfile 2>&1 | \
> + _filter_scratch
> +
> + # FS should be shut down, touch will fail
> + touch $testfile 2>&1 | _filter_scratch
> +
> + # Remount to replay log
> + _scratch_remount_dump_log >> $seqres.full
> +
> + # FS should be online, touch should succeed
> + touch $testfile
> +
> + # Verify attr recovery
> + $ATTR_PROG -l $testfile | _filter_scratch
> + echo -n "$attr_name: "
> + $ATTR_PROG -q -g $attr_name $testfile | md5sum;
> +
> + echo ""
> +}
> +
> +create_test_file()
> +{
> + filename=$testdir/$1
> + count=$2
> + attr_value=$3
> +
> + touch $filename
> +
> + for i in `seq $count`
> + do
> + $ATTR_PROG -s "attr_name$i" -V $attr_value $filename >> \
> + $seqres.full
> + done
> +}
> +
> +# real QA test starts here
> +_supported_fs xfs
> +
> +_require_scratch
> +_require_scratch_xfs_crc
> +_require_attrs
> +_require_xfs_io_error_injection "larp"
> +_require_xfs_io_error_injection "da_leaf_split"
> +_require_xfs_io_error_injection "attr_leaf_to_node"
> +_require_xfs_sysfs debug/larp
> +test -w /sys/fs/xfs/debug/larp || _notrun "larp knob not writable"
> +
> +# turn on log attributes
> +echo 1 > /sys/fs/xfs/debug/larp
> +
> +attr16="0123456789ABCDEF"
> +attr64="$attr16$attr16$attr16$attr16"
> +attr256="$attr64$attr64$attr64$attr64"
> +attr1k="$attr256$attr256$attr256$attr256"
> +attr4k="$attr1k$attr1k$attr1k$attr1k"
> +attr8k="$attr4k$attr4k"
> +attr16k="$attr8k$attr8k"
> +attr32k="$attr16k$attr16k"
> +attr64k="$attr32k$attr32k"
> +
> +echo "*** mkfs"
> +_scratch_mkfs >/dev/null
> +
> +echo "*** mount FS"
> +_scratch_mount
> +
> +testdir=$SCRATCH_MNT/testdir
> +mkdir $testdir
> +
> +# empty, inline
> +create_test_file empty_file1 0
> +test_attr_replay empty_file1 "attr_name" $attr64 "s" "larp"
> +test_attr_replay empty_file1 "attr_name" $attr64 "r" "larp"
> +
> +# empty, internal
> +create_test_file empty_file2 0
> +test_attr_replay empty_file2 "attr_name" $attr1k "s" "larp"
> +test_attr_replay empty_file2 "attr_name" $attr1k "r" "larp"
> +
> +# empty, remote
> +create_test_file empty_file3 0
> +test_attr_replay empty_file3 "attr_name" $attr64k "s" "larp"
> +test_attr_replay empty_file3 "attr_name" $attr64k "r" "larp"
> +
> +# inline, inline
> +create_test_file inline_file1 1 $attr16
> +test_attr_replay inline_file1 "attr_name2" $attr64 "s" "larp"
> +test_attr_replay inline_file1 "attr_name2" $attr64 "r" "larp"
> +
> +# inline, internal
> +create_test_file inline_file2 1 $attr16
> +test_attr_replay inline_file2 "attr_name2" $attr1k "s" "larp"
> +test_attr_replay inline_file2 "attr_name2" $attr1k "r" "larp"
> +
> +# inline, remote
> +create_test_file inline_file3 1 $attr16
> +test_attr_replay inline_file3 "attr_name2" $attr64k "s" "larp"
> +test_attr_replay inline_file3 "attr_name2" $attr64k "r" "larp"
> +
> +# extent, internal
> +create_test_file extent_file1 1 $attr1k
> +test_attr_replay extent_file1 "attr_name2" $attr1k "s" "larp"
> +test_attr_replay extent_file1 "attr_name2" $attr1k "r" "larp"
> +
> +# extent, inject error on split
> +create_test_file extent_file2 3 $attr1k
> +test_attr_replay extent_file2 "attr_name4" $attr1k "s" "da_leaf_split"
> +
> +# extent, inject error on fork transition
> +create_test_file extent_file3 3 $attr1k
> +test_attr_replay extent_file3 "attr_name4" $attr1k "s" "attr_leaf_to_node"
> +
> +# extent, remote
> +create_test_file extent_file4 1 $attr1k
> +test_attr_replay extent_file4 "attr_name2" $attr64k "s" "larp"
> +test_attr_replay extent_file4 "attr_name2" $attr64k "r" "larp"
> +
> +# remote, internal
> +create_test_file remote_file1 1 $attr64k
> +test_attr_replay remote_file1 "attr_name2" $attr1k "s" "larp"
> +test_attr_replay remote_file1 "attr_name2" $attr1k "r" "larp"
> +
> +# remote, remote
> +create_test_file remote_file2 1 $attr64k
> +test_attr_replay remote_file2 "attr_name2" $attr64k "s" "larp"
> +test_attr_replay remote_file2 "attr_name2" $attr64k "r" "larp"
> +
> +# replace shortform with different value
> +create_test_file sf_file 2 $attr64
> +test_attr_replay sf_file "attr_name2" $attr16 "s" "larp"
> +
> +# replace leaf with different value
> +create_test_file leaf_file 3 $attr1k
> +test_attr_replay leaf_file "attr_name2" $attr256 "s" "larp"
> +
> +# replace node with a different value
> +create_test_file node_file 1 $attr64k
> +$ATTR_PROG -s "attr_name2" -V $attr1k $testdir/node_file \
> + >> $seqres.full
> +test_attr_replay node_file "attr_name2" $attr256 "s" "larp"
> +
> +echo "*** done"
> +status=0
> +exit
> diff --git a/tests/xfs/600.out b/tests/xfs/600.out
> new file mode 100644
> index 00000000..fe25ea3e
> --- /dev/null
> +++ b/tests/xfs/600.out
> @@ -0,0 +1,188 @@
> +QA output created by 600
> +*** mkfs
> +*** mount FS
> +attr_set: Input/output error
> +Could not set "attr_name" for SCRATCH_MNT/testdir/empty_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/empty_file1': Input/output error
> +Attribute "attr_name" has a 65 byte value for SCRATCH_MNT/testdir/empty_file1
> +attr_name: cfbe2a33be4601d2b655d099a18378fc -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name" for SCRATCH_MNT/testdir/empty_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/empty_file1': Input/output error
> +attr_name: attr_get: No data available
> +Could not get "attr_name" for /mnt/scratch/testdir/empty_file1
SCRATCH_MNT, not /mnt/scratch?
--D
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name" for SCRATCH_MNT/testdir/empty_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/empty_file2': Input/output error
> +Attribute "attr_name" has a 1025 byte value for SCRATCH_MNT/testdir/empty_file2
> +attr_name: 9fd415c49d67afc4b78fad4055a3a376 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name" for SCRATCH_MNT/testdir/empty_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/empty_file2': Input/output error
> +attr_name: attr_get: No data available
> +Could not get "attr_name" for /mnt/scratch/testdir/empty_file2
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name" for SCRATCH_MNT/testdir/empty_file3
> +touch: cannot touch 'SCRATCH_MNT/testdir/empty_file3': Input/output error
> +Attribute "attr_name" has a 65536 byte value for SCRATCH_MNT/testdir/empty_file3
> +attr_name: 7f6fd1b6d872108bd44bd143cbcdfa19 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name" for SCRATCH_MNT/testdir/empty_file3
> +touch: cannot touch 'SCRATCH_MNT/testdir/empty_file3': Input/output error
> +attr_name: attr_get: No data available
> +Could not get "attr_name" for /mnt/scratch/testdir/empty_file3
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/inline_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/inline_file1': Input/output error
> +Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file1
> +Attribute "attr_name2" has a 65 byte value for SCRATCH_MNT/testdir/inline_file1
> +attr_name2: cfbe2a33be4601d2b655d099a18378fc -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/inline_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/inline_file1': Input/output error
> +Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file1
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/inline_file1
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/inline_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/inline_file2': Input/output error
> +Attribute "attr_name2" has a 1025 byte value for SCRATCH_MNT/testdir/inline_file2
> +Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file2
> +attr_name2: 9fd415c49d67afc4b78fad4055a3a376 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/inline_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/inline_file2': Input/output error
> +Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file2
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/inline_file2
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/inline_file3
> +touch: cannot touch 'SCRATCH_MNT/testdir/inline_file3': Input/output error
> +Attribute "attr_name2" has a 65536 byte value for SCRATCH_MNT/testdir/inline_file3
> +Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file3
> +attr_name2: 7f6fd1b6d872108bd44bd143cbcdfa19 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/inline_file3
> +touch: cannot touch 'SCRATCH_MNT/testdir/inline_file3': Input/output error
> +Attribute "attr_name1" has a 16 byte value for SCRATCH_MNT/testdir/inline_file3
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/inline_file3
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/extent_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/extent_file1': Input/output error
> +Attribute "attr_name2" has a 1025 byte value for SCRATCH_MNT/testdir/extent_file1
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file1
> +attr_name2: 9fd415c49d67afc4b78fad4055a3a376 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/extent_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/extent_file1': Input/output error
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file1
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/extent_file1
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name4" for SCRATCH_MNT/testdir/extent_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/extent_file2': Input/output error
> +Attribute "attr_name4" has a 1025 byte value for SCRATCH_MNT/testdir/extent_file2
> +Attribute "attr_name2" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file2
> +Attribute "attr_name3" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file2
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file2
> +attr_name4: 9fd415c49d67afc4b78fad4055a3a376 -
> +
> +attr_set: Input/output error
> +Could not set "attr_name4" for SCRATCH_MNT/testdir/extent_file3
> +touch: cannot touch 'SCRATCH_MNT/testdir/extent_file3': Input/output error
> +Attribute "attr_name4" has a 1025 byte value for SCRATCH_MNT/testdir/extent_file3
> +Attribute "attr_name2" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file3
> +Attribute "attr_name3" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file3
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file3
> +attr_name4: 9fd415c49d67afc4b78fad4055a3a376 -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/extent_file4
> +touch: cannot touch 'SCRATCH_MNT/testdir/extent_file4': Input/output error
> +Attribute "attr_name2" has a 65536 byte value for SCRATCH_MNT/testdir/extent_file4
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file4
> +attr_name2: 7f6fd1b6d872108bd44bd143cbcdfa19 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/extent_file4
> +touch: cannot touch 'SCRATCH_MNT/testdir/extent_file4': Input/output error
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/extent_file4
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/extent_file4
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/remote_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/remote_file1': Input/output error
> +Attribute "attr_name2" has a 1025 byte value for SCRATCH_MNT/testdir/remote_file1
> +Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file1
> +attr_name2: 9fd415c49d67afc4b78fad4055a3a376 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/remote_file1
> +touch: cannot touch 'SCRATCH_MNT/testdir/remote_file1': Input/output error
> +Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file1
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/remote_file1
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/remote_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/remote_file2': Input/output error
> +Attribute "attr_name2" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file2
> +Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file2
> +attr_name2: 7f6fd1b6d872108bd44bd143cbcdfa19 -
> +
> +attr_remove: Input/output error
> +Could not remove "attr_name2" for SCRATCH_MNT/testdir/remote_file2
> +touch: cannot touch 'SCRATCH_MNT/testdir/remote_file2': Input/output error
> +Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/remote_file2
> +attr_name2: attr_get: No data available
> +Could not get "attr_name2" for /mnt/scratch/testdir/remote_file2
> +d41d8cd98f00b204e9800998ecf8427e -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/sf_file
> +touch: cannot touch 'SCRATCH_MNT/testdir/sf_file': Input/output error
> +Attribute "attr_name1" has a 64 byte value for SCRATCH_MNT/testdir/sf_file
> +Attribute "attr_name2" has a 17 byte value for SCRATCH_MNT/testdir/sf_file
> +attr_name2: 9a6eb1bc9da3c66a9b495dfe2fe8a756 -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/leaf_file
> +touch: cannot touch 'SCRATCH_MNT/testdir/leaf_file': Input/output error
> +Attribute "attr_name2" has a 257 byte value for SCRATCH_MNT/testdir/leaf_file
> +Attribute "attr_name3" has a 1024 byte value for SCRATCH_MNT/testdir/leaf_file
> +Attribute "attr_name1" has a 1024 byte value for SCRATCH_MNT/testdir/leaf_file
> +attr_name2: f4ea5799d72a0a9bf2d56a685c9cba7a -
> +
> +attr_set: Input/output error
> +Could not set "attr_name2" for SCRATCH_MNT/testdir/node_file
> +touch: cannot touch 'SCRATCH_MNT/testdir/node_file': Input/output error
> +Attribute "attr_name2" has a 257 byte value for SCRATCH_MNT/testdir/node_file
> +Attribute "attr_name1" has a 65536 byte value for SCRATCH_MNT/testdir/node_file
> +attr_name2: f4ea5799d72a0a9bf2d56a685c9cba7a -
> +
> +*** done
> --
> 2.35.1
>
