On Mon, May 16, 2022 at 06:59:21PM +1000, Dave Chinner wrote:
> From: Dave Chinner <dchinner@xxxxxxxxxx>
>
> We replaced an attr named:
>
> slashstr="are_bad_for_you"
>
> with this substitution:
>
> cp $imgfile $imgfile.old
> sed -b \
> -e "s/$nullstr/too_many\x00beans/g" \
> -e "s/$slashstr/are_bad\/for_you/g" \
> -i $imgfile
>
> We then try to retreive the attr named 'a_are_bad/for_you'. The
> failure is:
>
> -Attribute "a_are_bad/for_you" had a 3 byte value for TEST_DIR/mount-148/testfile:
> -heh
> +attr_get: No data available
> +Could not get "a_are_bad/for_you" for TEST_DIR/mount-148/testfile
>
> The error returned is ENODATA - the xattr does not exist. While the
> name might exist in the attr leaf block:
>
> ....
> nvlist[0].valuelen = 3
> nvlist[0].namelen = 17
> nvlist[0].name = "a_are_bad/for_you"
> nvlist[0].value = "heh"
> nvlist[1].valuelen = 3
> ....
>
> xattrs are not looked up by name matches when in leaf or node form
> like they are in short form. They are looked up by *name hash*
> matches, and if the hash is not found, then the name does not exist.
> Only if the has match is found, then it goes and retrieves the xattr
> pointed to by the hash and checks the name.
>
> At this point, it should be obvious that the hash of
> "a_are_bad_for_you" is different to "a_a_are_bad/for_you". Hence the
> leaf lookup is always rejected at the hash match stage and never
> gets to the name compare stage.
>
> IOWs, this test can *never* pass when the xattr is in leaf/node
> form, only when it is in short form.
>
> The reason the attr fork is in leaf form is that we are using
> "-m crc=0" and so the inodes are only 256 bytes in size and can only
> hold ~150 bytes in the literal area. That leaves ~100 bytes maximum
> for shortform attr data. The test consumes ~80 bytes of shortform
> space, so it should fit and the test pass.
>
> However:
>
> nvlist[4].valuelen = 37
> nvlist[4].namelen = 7
> nvlist[4].name = "selinux"
> nvlist[4].value = "unconfined_u:object_r:unlabeled_t:s0\000"
>
> Yes, I run the fstests with selinux enabled on some of test
> machines. The selinux attr pushes the attr fork way over the size
> that can fit in the shortform literal area, and so it moves to leaf
> form as the attrs are initially added and the test fails.
>
> Fix this by forcing the test to use 512 byte inodes, so as to
> provide around 350 bytes of usable attr fork literal area so it's
> not affected by security attributes.
I've long wondered if I should patch in a "security" module that
automatically pastes in a fake "s3linux" attribute so that I can
experience the different fs behavior that y'all see.
> While there, clean up the silly conditional loop device cleanup
> code.
>
> Signed-off-by: Dave Chinner <dchinner@xxxxxxxxxx>
Looks good,
Reviewed-by: Darrick J. Wong <djwong@xxxxxxxxxx>
--D
> ---
> tests/xfs/148 | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/tests/xfs/148 b/tests/xfs/148
> index 8d50a642..5d0a0bf4 100755
> --- a/tests/xfs/148
> +++ b/tests/xfs/148
> @@ -15,7 +15,7 @@ _cleanup()
> {
> cd /
> $UMOUNT_PROG $mntpt > /dev/null 2>&1
> - test -n "$loopdev" && _destroy_loop_device $loopdev > /dev/null 2>&1
> + _destroy_loop_device $loopdev > /dev/null 2>&1
> rm -r -f $tmp.*
> }
>
> @@ -41,9 +41,12 @@ test_names=("something" "$nullstr" "$slashstr" "another")
> rm -f $imgfile $imgfile.old
>
> # Format image file w/o crcs so we can sed the image file
> +# We need to use 512 byte inodes to ensure the attr forks remain in short form
> +# even when security xattrs are present so we are always doing name matches on
> +# lookup and not name hash compares as leaf/node forms will do.
> $XFS_IO_PROG -f -c 'truncate 40m' $imgfile
> loopdev=$(_create_loop_device $imgfile)
> -MKFS_OPTIONS="-m crc=0" _mkfs_dev $loopdev >> $seqres.full
> +MKFS_OPTIONS="-m crc=0 -i size=512" _mkfs_dev $loopdev >> $seqres.full
>
> # Mount image file
> mkdir -p $mntpt
> @@ -121,9 +124,6 @@ res=$?
> test $res -eq 1 || \
> echo "repair failed to report corruption ($res)"
>
> -_destroy_loop_device $loopdev
> -loopdev=
> -
> # success, all done
> status=0
> exit
> --
> 2.35.1
>
