ping...
Regards,
Pankaj
On 2022-03-25 11:19, Pankaj Raghav wrote:
> This test will break when zone capacity != zone size because the
> calculation of the size to be filled is done using zone_size instead of
> the actual capacity available per zone. Fix it by using zone capacity.
>
> As a zoned device can have variable capacity, use the btrfs utility to
> get the zone capacity from the first data block group that the test will
> be performed on.
>
> The support to extract zone capacity was added to blkzone only from
> version 2.37. So zcap will be used only when the blkzone version is
> greater or equal to 2.37.
>
> Signed-off-by: Pankaj Raghav <p.raghav@xxxxxxxxxxx>
> ---
> Changes since v1:
> - Add a filter that can append a 'cap' column for blkzone version <2.37
> (Naohiro)
> - Extract the capacity from the zone on which the test is performed as a
> zoned device can have variable zone capacity(Naohiro)
>
> Changes since v2:
> - Use btrfs inspect-internal utility to find the first data zone address
> instead of hardcoding. (Naohiro)
>
> Changes since v3:
> - Change 0x(\d)+ to 0x[[xdigit]]+ (Naohiro)
>
> common/filter | 13 +++++++++++++
> tests/btrfs/237 | 21 +++++++++++++++++----
> 2 files changed, 30 insertions(+), 4 deletions(-)
>
> diff --git a/common/filter b/common/filter
> index 257227c2..5fe86756 100644
> --- a/common/filter
> +++ b/common/filter
> @@ -634,5 +634,18 @@ _filter_bash()
> sed -e "s/^bash: line 1: /bash: /"
> }
>
> +#
> +# blkzone report added zone capacity to be printed from v2.37.
> +# This filter will add an extra column 'cap' with the same value of
> +# 'len'(zone size) for blkzone version < 2.37
> +#
> +# Before: start: 0x000100000, len 0x040000, wptr 0x000000 ..
> +# After: start: 0x000100000, len 0x040000, cap 0x040000, wptr 0x000000 ..
> +_filter_blkzone_report()
> +{
> + $AWK_PROG -F "," 'BEGIN{OFS=",";} $3 !~ /cap/ {$2=$2","$2;} {print;}' |\
> + sed -e 's/len/cap/2'
> +}
> +
> # make sure this script returns success
> /bin/true
> diff --git a/tests/btrfs/237 b/tests/btrfs/237
> index 96940549..f96031d5 100755
> --- a/tests/btrfs/237
> +++ b/tests/btrfs/237
> @@ -35,8 +35,13 @@ get_data_bg()
> grep -Eo "CHUNK_ITEM [[:digit:]]+" | cut -d ' ' -f 2
> }
>
> -zonesize=$(cat /sys/block/$(_short_dev $SCRATCH_DEV)/queue/chunk_sectors)
> -zonesize=$((zonesize << 9))
> +get_data_bg_physical()
> +{
> + # Assumes SINGLE data profile
> + $BTRFS_UTIL_PROG inspect-internal dump-tree -t CHUNK $SCRATCH_DEV |\
> + grep -A 4 CHUNK_ITEM | grep -A 3 'type DATA\|SINGLE' |\
> + grep -Eo 'offset [[:digit:]]+'| cut -d ' ' -f 2
> +}
>
> _scratch_mkfs >/dev/null 2>&1
> _scratch_mount -o commit=1 # 1s commit time to speed up test
> @@ -49,12 +54,20 @@ if [[ "$uuid" == "" ]]; then
> exit 1
> fi
>
> +start_data_bg_phy=$(get_data_bg_physical)
> +start_data_bg_phy=$((start_data_bg_phy >> 9))
> +
> +size=$($BLKZONE_PROG report -o $start_data_bg_phy -l 1 $SCRATCH_DEV |\
> + _filter_blkzone_report |\
> + grep -Po "cap 0x[[:xdigit:]]+" | cut -d ' ' -f 2)
> +size=$((size << 9))
> +
> reclaim_threshold=75
> echo $reclaim_threshold > /sys/fs/btrfs/"$uuid"/bg_reclaim_threshold
> fill_percent=$((reclaim_threshold + 2))
> rest_percent=$((90 - fill_percent)) # make sure we're not creating a new BG
> -fill_size=$((zonesize * fill_percent / 100))
> -rest=$((zonesize * rest_percent / 100))
> +fill_size=$((size * fill_percent / 100))
> +rest=$((size * rest_percent / 100))
>
> # step 1, fill FS over $fillsize
> $XFS_IO_PROG -fc "pwrite 0 $fill_size" $SCRATCH_MNT/$seq.test1 >> $seqres.full
