We fail btrfs/022 with -o compress because we test qgroup limits for one
of the variations. However this test also tests rescan and a few other
things that pass fine with compression enabled. Handle this by using
the _require_no_compress helper for btrfs/022, and then creating a new
test that is a copy of 022 without the limit exceed test. This will
allow us to still be able to test the basic functionality with
compression enabled, and keep us from failing the limit check.
Signed-off-by: Josef Bacik <josef@xxxxxxxxxxxxxx>
---
tests/btrfs/022 | 3 ++
tests/btrfs/251 | 108 ++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/251.out | 2 +
3 files changed, 113 insertions(+)
create mode 100755 tests/btrfs/251
create mode 100644 tests/btrfs/251.out
diff --git a/tests/btrfs/022 b/tests/btrfs/022
index bfd6ac7f..e126e82a 100755
--- a/tests/btrfs/022
+++ b/tests/btrfs/022
@@ -16,6 +16,9 @@ _supported_fs btrfs
_require_scratch
_require_btrfs_qgroup_report
+# This test requires specific data usage, skip if we have compression enabled
+_require_no_compress
+
# Test to make sure we can actually turn it on and it makes sense
_basic_test()
{
diff --git a/tests/btrfs/251 b/tests/btrfs/251
new file mode 100755
index 00000000..ba23cdce
--- /dev/null
+++ b/tests/btrfs/251
@@ -0,0 +1,108 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2021 Facebook. All Rights Reserved.
+#
+# FS QA Test No. 251
+#
+# Test the basic functionality of qgroups except for the limit enforcement,
+# this is just btrfs/022 without the limit check so we can test it with
+# compression enabled.
+#
+. ./common/preamble
+_begin_fstest auto qgroup limit
+
+# Import common functions.
+. ./common/filter
+
+_supported_fs btrfs
+_require_scratch
+_require_btrfs_qgroup_report
+
+# Test to make sure we can actually turn it on and it makes sense
+_basic_test()
+{
+ echo "=== basic test ===" >> $seqres.full
+ _run_btrfs_util_prog subvolume create $SCRATCH_MNT/a
+ _run_btrfs_util_prog quota enable $SCRATCH_MNT/a
+ _run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+ subvolid=$(_btrfs_get_subvolid $SCRATCH_MNT a)
+ $BTRFS_UTIL_PROG qgroup show $units $SCRATCH_MNT | grep $subvolid >> \
+ $seqres.full 2>&1
+ [ $? -eq 0 ] || _fail "couldn't find our subvols quota group"
+ run_check $FSSTRESS_PROG -d $SCRATCH_MNT/a -w -p 1 -n 2000 \
+ $FSSTRESS_AVOID
+ _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT/a \
+ $SCRATCH_MNT/b
+
+ # the shared values of both the original subvol and snapshot should
+ # match
+ a_shared=$($BTRFS_UTIL_PROG qgroup show $units $SCRATCH_MNT | grep "0/$subvolid")
+ a_shared=$(echo $a_shared | awk '{ print $2 }')
+ echo "subvol a id=$subvolid" >> $seqres.full
+ subvolid=$(_btrfs_get_subvolid $SCRATCH_MNT b)
+ echo "subvol b id=$subvolid" >> $seqres.full
+ b_shared=$($BTRFS_UTIL_PROG qgroup show $units $SCRATCH_MNT | grep "0/$subvolid")
+ b_shared=$(echo $b_shared | awk '{ print $2 }')
+ $BTRFS_UTIL_PROG qgroup show $units $SCRATCH_MNT >> $seqres.full
+ [ $b_shared -eq $a_shared ] || _fail "shared values don't match"
+}
+
+#enable quotas, do some work, check our values and then rescan and make sure we
+#come up with the same answer
+_rescan_test()
+{
+ echo "=== rescan test ===" >> $seqres.full
+ # first with a blank subvol
+ _run_btrfs_util_prog subvolume create $SCRATCH_MNT/a
+ _run_btrfs_util_prog quota enable $SCRATCH_MNT/a
+ subvolid=$(_btrfs_get_subvolid $SCRATCH_MNT a)
+ run_check $FSSTRESS_PROG -d $SCRATCH_MNT/a -w -p 1 -n 2000 \
+ $FSSTRESS_AVOID
+ sync
+ output=$($BTRFS_UTIL_PROG qgroup show $units $SCRATCH_MNT | grep "0/$subvolid")
+ echo "qgroup values before rescan: $output" >> $seqres.full
+ refer=$(echo $output | awk '{ print $2 }')
+ excl=$(echo $output | awk '{ print $3 }')
+ _run_btrfs_util_prog quota rescan -w $SCRATCH_MNT
+ output=$($BTRFS_UTIL_PROG qgroup show $units $SCRATCH_MNT | grep "0/$subvolid")
+ echo "qgroup values after rescan: $output" >> $seqres.full
+ [ $refer -eq $(echo $output | awk '{ print $2 }') ] || \
+ _fail "reference values don't match after rescan"
+ [ $excl -eq $(echo $output | awk '{ print $3 }') ] || \
+ _fail "exclusive values don't match after rescan"
+}
+
+#basic noexceed limit testing
+_limit_test_noexceed()
+{
+ echo "=== limit not exceed test ===" >> $seqres.full
+ _run_btrfs_util_prog subvolume create $SCRATCH_MNT/a
+ _run_btrfs_util_prog quota enable $SCRATCH_MNT
+ subvolid=$(_btrfs_get_subvolid $SCRATCH_MNT a)
+ _run_btrfs_util_prog qgroup limit 5M 0/$subvolid $SCRATCH_MNT
+ _ddt of=$SCRATCH_MNT/a/file bs=4M count=1 >> $seqres.full 2>&1
+ [ $? -eq 0 ] || _fail "should have been allowed to write"
+}
+
+units=`_btrfs_qgroup_units`
+
+_scratch_mkfs > /dev/null 2>&1
+_scratch_mount
+_basic_test
+_scratch_unmount
+_check_scratch_fs
+
+_scratch_mkfs > /dev/null 2>&1
+_scratch_mount
+_rescan_test
+_scratch_unmount
+_check_scratch_fs
+
+_scratch_mkfs > /dev/null 2>&1
+_scratch_mount
+_limit_test_noexceed
+
+# success, all done
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/btrfs/251.out b/tests/btrfs/251.out
new file mode 100644
index 00000000..e5cd36a9
--- /dev/null
+++ b/tests/btrfs/251.out
@@ -0,0 +1,2 @@
+QA output created by 251
+Silence is golden
--
2.26.3
