On Tue, Mar 30, 2021 at 06:08:28PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <djwong@xxxxxxxxxx>
>
> Currently, the only functional testing for xfs_admin is xfs/287, which
> checks that one can add 32-bit project ids to a V4 filesystem. This
> obviously isn't an exhaustive test of all the CLI arguments, and
> historically there have been xfs configurations that don't even work.
>
> Therefore, introduce a couple of new tests -- one that will test the
> simple options with the default configuration, and a second test that
> steps a bit outside of the test run configuration to make sure that we
> do the right thing for external devices. The second test already caught
> a nasty bug in xfsprogs 5.11.
>
> Signed-off-by: Darrick J. Wong <djwong@xxxxxxxxxx>
> ---
> common/xfs | 21 ++++++++++
> tests/xfs/764 | 91 ++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/764.out | 17 ++++++++
> tests/xfs/773 | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/773.out | 19 +++++++++
> tests/xfs/group | 2 +
> 6 files changed, 264 insertions(+)
> create mode 100755 tests/xfs/764
> create mode 100644 tests/xfs/764.out
> create mode 100755 tests/xfs/773
> create mode 100644 tests/xfs/773.out
>
>
...
> diff --git a/tests/xfs/764 b/tests/xfs/764
> new file mode 100755
> index 00000000..c710ad4e
> --- /dev/null
> +++ b/tests/xfs/764
> @@ -0,0 +1,91 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle. All Rights Reserved.
> +#
> +# FS QA Test No. 764
> +#
> +# Functional testing for xfs_admin to make sure that it handles option parsing
> +# correctly, at least for functionality that's relevant to V5 filesystems.
This test doesn't seem to depend on v5..?
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_scratch
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +
> +rm -f $seqres.full
> +
> +note() {
> + echo "$@" | tee -a $seqres.full
> +}
> +
> +note "S0: Initialize filesystem"
> +_scratch_mkfs -L origlabel -m uuid=babababa-baba-baba-baba-babababababa >> $seqres.full
> +_scratch_xfs_db -c label -c uuid
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
> +note "S1: Set a filesystem label"
> +_scratch_xfs_admin -L newlabel >> $seqres.full
> +_scratch_xfs_db -c label
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
> +note "S2: Clear filesystem label"
> +_scratch_xfs_admin -L -- >> $seqres.full
> +_scratch_xfs_db -c label
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
> +note "S3: Try to set oversized label"
> +_scratch_xfs_admin -L thisismuchtoolongforxfstohandle >> $seqres.full
> +_scratch_xfs_db -c label
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
> +note "S4: Set filesystem UUID"
> +_scratch_xfs_admin -U deaddead-dead-dead-dead-deaddeaddead >> $seqres.full
> +_scratch_xfs_db -c uuid
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
> +note "S5: Zero out filesystem UUID"
> +_scratch_xfs_admin -U nil >> $seqres.full
> +_scratch_xfs_db -c uuid
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
> +note "S6: Randomize filesystem UUID"
> +old_uuid="$(_scratch_xfs_db -c uuid)"
> +_scratch_xfs_admin -U generate >> $seqres.full
> +new_uuid="$(_scratch_xfs_db -c uuid)"
> +if [ "$new_uuid" = "$old_uuid" ]; then
> + echo "UUID randomization failed? $old_uuid == $new_uuid"
> +fi
> +_scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +
Can we drop all these intermediate repair invocations and just rely on
the post-test device check? Otherwise the rest LGTM.
Brian
> +note "S7: Restore original filesystem UUID"
> +if _check_scratch_xfs_features V5 >/dev/null; then
> + # Only V5 supports the metauuid feature that enables us to restore the
> + # original UUID after a change.
> + _scratch_xfs_admin -U restore >> $seqres.full
> + _scratch_xfs_db -c uuid
> +else
> + echo "UUID = babababa-baba-baba-baba-babababababa"
> +fi
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/764.out b/tests/xfs/764.out
> new file mode 100644
> index 00000000..8da929ec
> --- /dev/null
> +++ b/tests/xfs/764.out
> @@ -0,0 +1,17 @@
> +QA output created by 764
> +S0: Initialize filesystem
> +label = "origlabel"
> +UUID = babababa-baba-baba-baba-babababababa
> +S1: Set a filesystem label
> +label = "newlabel"
> +S2: Clear filesystem label
> +label = ""
> +S3: Try to set oversized label
> +label = "thisismuchto"
> +S4: Set filesystem UUID
> +UUID = deaddead-dead-dead-dead-deaddeaddead
> +S5: Zero out filesystem UUID
> +UUID = 00000000-0000-0000-0000-000000000000
> +S6: Randomize filesystem UUID
> +S7: Restore original filesystem UUID
> +UUID = babababa-baba-baba-baba-babababababa
> diff --git a/tests/xfs/773 b/tests/xfs/773
> new file mode 100755
> index 00000000..f184962a
> --- /dev/null
> +++ b/tests/xfs/773
> @@ -0,0 +1,114 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2021 Oracle. All Rights Reserved.
> +#
> +# FS QA Test No. 773
> +#
> +# Functional testing for xfs_admin to ensure that it parses arguments correctly
> +# with regards to data devices that are files, external logs, and realtime
> +# devices.
> +#
> +# Because this test synthesizes log and rt devices (by modifying the test run
> +# configuration), it does /not/ require the ability to mount the scratch
> +# filesystem. This increases test coverage while isolating the weird bits to a
> +# single test.
> +#
> +# This is partially a regression test for "xfs_admin: pick up log arguments
> +# correctly", insofar as the issue fixed by that patch was discovered with an
> +# earlier revision of this test.
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.* $fake_logfile $fake_rtfile $fake_datafile
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs xfs
> +_require_test
> +_require_scratch_nocheck
> +_require_command "$XFS_ADMIN_PROG" "xfs_admin"
> +
> +rm -f $seqres.full
> +
> +# Create some fake sparse files for testing external devices and whatnot
> +fake_datafile=$TEST_DIR/scratch.data
> +rm -f $fake_datafile
> +truncate -s 500m $fake_datafile
> +
> +fake_logfile=$TEST_DIR/scratch.log
> +rm -f $fake_logfile
> +truncate -s 500m $fake_logfile
> +
> +fake_rtfile=$TEST_DIR/scratch.rt
> +rm -f $fake_rtfile
> +truncate -s 500m $fake_rtfile
> +
> +# Save the original variables
> +orig_ddev=$SCRATCH_DEV
> +orig_external=$USE_EXTERNAL
> +orig_logdev=$SCRATCH_LOGDEV
> +orig_rtdev=$SCRATCH_RTDEV
> +
> +scenario() {
> + echo "$@" | tee -a $seqres.full
> +
> + SCRATCH_DEV=$orig_ddev
> + USE_EXTERNAL=$orig_external
> + SCRATCH_LOGDEV=$orig_logdev
> + SCRATCH_RTDEV=$orig_rtdev
> +}
> +
> +check_label() {
> + _scratch_mkfs -L oldlabel >> $seqres.full
> + _scratch_xfs_db -c label
> + _scratch_xfs_admin -L newlabel "$@" >> $seqres.full
> + _scratch_xfs_db -c label
> + _scratch_xfs_repair -n &>> $seqres.full || echo "Check failed?"
> +}
> +
> +scenario "S1: Check that label setting with file image"
> +SCRATCH_DEV=$fake_datafile
> +check_label -f
> +
> +scenario "S2: Check that setting with logdev works"
> +USE_EXTERNAL=yes
> +SCRATCH_LOGDEV=$fake_logfile
> +check_label
> +
> +scenario "S3: Check that setting with rtdev works"
> +USE_EXTERNAL=yes
> +SCRATCH_RTDEV=$fake_rtfile
> +check_label
> +
> +scenario "S4: Check that setting with rtdev + logdev works"
> +USE_EXTERNAL=yes
> +SCRATCH_LOGDEV=$fake_logfile
> +SCRATCH_RTDEV=$fake_rtfile
> +check_label
> +
> +scenario "S5: Check that setting with nortdev + nologdev works"
> +USE_EXTERNAL=
> +SCRATCH_LOGDEV=
> +SCRATCH_RTDEV=
> +check_label
> +
> +scenario "S6: Check that setting with bdev incorrectly flagged as file works"
> +check_label -f
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/773.out b/tests/xfs/773.out
> new file mode 100644
> index 00000000..954bfb85
> --- /dev/null
> +++ b/tests/xfs/773.out
> @@ -0,0 +1,19 @@
> +QA output created by 773
> +S1: Check that label setting with file image
> +label = "oldlabel"
> +label = "newlabel"
> +S2: Check that setting with logdev works
> +label = "oldlabel"
> +label = "newlabel"
> +S3: Check that setting with rtdev works
> +label = "oldlabel"
> +label = "newlabel"
> +S4: Check that setting with rtdev + logdev works
> +label = "oldlabel"
> +label = "newlabel"
> +S5: Check that setting with nortdev + nologdev works
> +label = "oldlabel"
> +label = "newlabel"
> +S6: Check that setting with bdev incorrectly flagged as file works
> +label = "oldlabel"
> +label = "newlabel"
> diff --git a/tests/xfs/group b/tests/xfs/group
> index 09fddb5a..5801471b 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -520,5 +520,7 @@
> 537 auto quick
> 538 auto stress
> 539 auto quick mount
> +764 auto quick repair
> 768 auto quick repair
> 770 auto repair
> +773 auto quick repair
>
