From: Marcos Paulo de Souza <mpdesouza@xxxxxxxx>
This new test will apply different mount points and check if they were applied
by reading /proc/self/mounts. Almost all available btrfs options are tested
here, leaving only device=, which is tested in btrfs/125 and space_cache, tested
in btrfs/131.
This test does not apply any workload after the fs is mounted, just checks is
the option was set/unset correctly.
Kernel with the following patch should pass the test:
btrfs: reset compression level for lzo on remount
Signed-off-by: Marcos Paulo de Souza <mpdesouza@xxxxxxxx>
Reviewed-by: Josef Bacik <josef@xxxxxxxxxxxxxx>
---
Changes from v1:
* Added Josef's reviewed-by tag
* Added commit needed for this test to pass
* Bumped test number to 219
tests/btrfs/219 | 302 ++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/219.out | 2 +
tests/btrfs/group | 1 +
3 files changed, 305 insertions(+)
create mode 100755 tests/btrfs/219
create mode 100644 tests/btrfs/219.out
diff --git a/tests/btrfs/219 b/tests/btrfs/219
new file mode 100755
index 00000000..e793b568
--- /dev/null
+++ b/tests/btrfs/219
@@ -0,0 +1,302 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 SUSE Linux Products GmbH. All Rights Reserved.
+#
+# FS QA Test 219
+#
+# Test all existent mount options of btrfs
+# * device= argument is already being test by btrfs/125
+# * space cache test already covered by test btrfs/131
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+
+cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# Compare the mounted flags with $opt_check. When the comparison fails, $opt is
+# echoed to help to track which option was used to trigger the unexpected
+# results.
+test_mount_flags()
+{
+ local opt
+ local opt_check
+ opt="$1"
+ opt_check="$2"
+
+ active_opt=$(cat /proc/self/mounts | grep $SCRATCH_MNT | \
+ $AWK_PROG '{ print $4 }')
+ if [[ "$active_opt" != *$opt_check* ]]; then
+ echo "Could not find '$opt_check' in '$active_opt', using '$opt'"
+ fi
+}
+
+# Mounts using opt ($1), remounts using remount_opt ($2), and remounts again
+# using opt again (1), checking if the mount opts are being enabled/disabled by
+# using _check arguments ($3 and $4)
+test_enable_disable_mount_opt()
+{
+ local opt
+ local opt_check
+ local remount_opt
+ local remount_opt_check
+ opt="$1"
+ opt_check="$2"
+ remount_opt="$3"
+ remount_opt_check="$4"
+
+ _scratch_mount "-o $opt"
+
+ test_mount_flags $opt $opt_check
+
+ _scratch_remount $remount_opt
+
+ test_mount_flags $remount_opt $remount_opt_check
+
+ _scratch_remount $opt
+
+ test_mount_flags $opt $opt_check
+
+ _scratch_unmount
+}
+
+# Checks if mount options are applied and reverted correctly.
+# By using options to mount ($1) and remount ($2), this function will mount,
+# remount, and the mount with the original args, checking if the mount options
+# match the _check args ($3 and $4).
+
+# Later, opt and remount_opt are swapped, testing the counterpart option if used
+# to first mount the fs.
+test_roundtrip_mount()
+{
+ local opt
+ local opt_check
+ local remount_opt
+ local remount_opt_check
+ opt="$1"
+ opt_check="$2"
+ remount_opt="$3"
+ remount_opt_check="$4"
+
+ # invert the args to make sure that both options work at mount and
+ # remount time
+ test_enable_disable_mount_opt $opt $opt_check $remount_opt $remount_opt_check
+ test_enable_disable_mount_opt $remount_opt $remount_opt_check $opt $opt_check
+}
+
+# Just mount and check if the options were mounted correctly by comparing the
+# results with $opt_check
+test_mount_opt()
+{
+ local opt
+ local opt_check
+ local active_opt
+ opt="$1"
+ opt_check="$2"
+
+ _scratch_mount "-o $opt"
+
+ test_mount_flags $opt $opt_check
+
+ _scratch_unmount
+}
+
+# Test mount options that should fail, usually by wrong arguments to options
+test_should_fail()
+{
+ local opt
+ opt="$1"
+
+ # wrong $opt on purpose, should fail
+ _try_scratch_mount "-o $opt" >/dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ return
+ fi
+ echo "Option $opt should fail to mount"
+ _scratch_unmount
+}
+
+# Try to mount using $opt, and bail our if the mount fails without errors. If
+# the mount succeeds, then compare the mount options with $opt_check
+test_optional_mount_opts()
+{
+ local opt
+ local opt_check
+ opt="$1"
+ opt_check="$2"
+
+ # $opt not enabled, return without running any tests
+ _try_scratch_mount "-o $opt" >/dev/null 2>&1 || return
+ _scratch_unmount
+
+ # option enabled, run the test
+ test_mount_opt $opt $opt_check
+}
+
+# Testes related to subvolumes, from subvol and subvolid options.
+test_subvol()
+{
+ test_should_fail "subvol=vol2"
+
+ _scratch_mount "-o subvol=vol1"
+ if [ ! -f "$SCRATCH_MNT/file.txt" ]; then
+ echo "file.txt not found inside vol1 using subvol=vol1 mount option"
+ fi
+ _scratch_unmount
+
+ test_should_fail "subvolid=222"
+
+ _scratch_mount "-o subvolid=256"
+ if [ ! -f "$SCRATCH_MNT/file.txt" ]; then
+ echo "file.txt not found inside vol1 using subvolid=256 mount option"
+ fi
+ _scratch_unmount
+
+ # subvol and subvolid should point to the same subvolume
+ test_should_fail "-o subvol=vol1,subvolid=1234132"
+
+ test_mount_opt "subvol=vol1,subvolid=256" "space_cache,subvolid=256,subvol=/vol1"
+ test_roundtrip_mount "subvol=vol1" "space_cache,subvolid=256,subvol=/vol1" "subvolid=256" "space_cache,subvolid=256,subvol=/vol1"
+}
+
+# These options are enable at kernel compile time, so no bother if they fail
+test_optional_kernel_features()
+{
+ # Test options that are enabled by kernel config, and so can fail safely
+ test_optional_mount_opts "check_int" "space_cache,check_int,subvolid"
+ test_optional_mount_opts "check_int_data" "space_cache,check_int_data,subvolid"
+ test_optional_mount_opts "check_int_print_mask=123" "space_cache,check_int_print_mask=123,subvolid"
+
+ test_should_fail "fragment=invalid"
+ test_optional_mount_opts "fragment=all" "space_cache,fragment=data,fragment=metadata,subvolid"
+ test_optional_mount_opts "fragment=data" "space_cache,fragment=data,subvolid"
+ test_optional_mount_opts "fragment=metadata" "space_cache,fragment=metadata,subvolid"
+}
+
+test_non_revertible_options()
+{
+ test_mount_opt "clear_cache" "relatime,space_cache,clear_cache,subvolid"
+ test_mount_opt "degraded" "relatime,degraded,space_cache,subvolid"
+
+ test_mount_opt "inode_cache" "space_cache,inode_cache,subvolid"
+
+ # nologreplay should be used only with
+ test_should_fail "nologreplay"
+ test_mount_opt "nologreplay,ro" "ro,relatime,rescue=nologreplay,space_cache"
+
+ # norecovery should be used only with. This options is an alias to nologreplay
+ test_should_fail "norecovery"
+ test_mount_opt "norecovery,ro" "ro,relatime,rescue=nologreplay,space_cache"
+ test_mount_opt "rescan_uuid_tree" "relatime,space_cache,rescan_uuid_tree,subvolid"
+ test_mount_opt "skip_balance" "relatime,space_cache,skip_balance,subvolid"
+ test_mount_opt "user_subvol_rm_allowed" "space_cache,user_subvol_rm_allowed,subvolid"
+
+ test_should_fail "rescue=invalid"
+
+ # nologreplay requires readonly
+ test_should_fail "rescue=nologreplay"
+ test_mount_opt "rescue=nologreplay,ro" "relatime,rescue=nologreplay,space_cache"
+
+ test_mount_opt "rescue=usebackuproot,ro" "relatime,space_cache,subvolid"
+}
+
+# All these options can be reverted (with their "no" counterpart), or can have
+# their values set to default on remount
+test_revertible_options()
+{
+ test_roundtrip_mount "acl" "relatime,space_cache,subvolid" "noacl" "relatime,noacl,space_cache,subvolid"
+ test_roundtrip_mount "autodefrag" "relatime,space_cache,autodefrag" "noautodefrag" "relatime,space_cache,subvolid"
+ test_roundtrip_mount "barrier" "relatime,space_cache,subvolid" "nobarrier" "relatime,nobarrier,space_cache,subvolid"
+
+ test_should_fail "commit=-10"
+ # commit=0 sets the default, so btrfs hides this mount opt
+ test_roundtrip_mount "commit=35" "relatime,space_cache,commit=35,subvolid" "commit=0" "relatime,space_cache,subvolid"
+
+ test_should_fail "compress=invalid"
+ test_should_fail "compress-force=invalid"
+ test_roundtrip_mount "compress" "relatime,compress=zlib:3,space_cache,subvolid" "compress=lzo" "relatime,compress=lzo,space_cache,subvolid"
+ test_roundtrip_mount "compress=zstd" "relatime,compress=zstd:3,space_cache,subvolid" "compress=no" "relatime,space_cache,subvolid"
+ test_roundtrip_mount "compress-force=no" "relatime,space_cache,subvolid" "compress-force=zstd" "relatime,compress-force=zstd:3,space_cache,subvolid"
+ # zlib's max level is 9 and zstd's max level is 15
+ test_roundtrip_mount "compress=zlib:20" "relatime,compress=zlib:9,space_cache,subvolid" "compress=zstd:16" "relatime,compress=zstd:15,space_cache,subvolid"
+ test_roundtrip_mount "compress-force=lzo" "relatime,compress-force=lzo,space_cache,subvolid" "compress-force=zlib:4" "relatime,compress-force=zlib:4,space_cache,subvolid"
+
+ # on remount, if we only pass datacow after nodatacow was used it will remain with nodatasum
+ test_roundtrip_mount "nodatacow" "relatime,nodatasum,nodatacow,space_cache,subvolid" "datacow,datasum" "relatime,space_cache,subvolid"
+ # nodatacow disabled compression
+ test_roundtrip_mount "compress-force" "relatime,compress-force=zlib:3,space_cache,subvolid" "nodatacow" "relatime,nodatasum,nodatacow,space_cache,subvolid"
+
+ # nodatacow disabled both datacow and datasum, and datasum enabled datacow and datasum
+ test_roundtrip_mount "nodatacow" "relatime,nodatasum,nodatacow,space_cache,subvolid" "datasum" "relatime,space_cache,subvolid"
+ test_roundtrip_mount "nodatasum" "relatime,nodatasum,space_cache,subvolid" "datasum" "relatime,space_cache,subvolid"
+
+ test_should_fail "discard=invalid"
+ test_roundtrip_mount "discard" "relatime,discard,space_cache,subvolid" "discard=sync" "relatime,discard,space_cache,subvolid"
+ test_roundtrip_mount "discard=async" "relatime,discard=async,space_cache,subvolid" "discard=sync" "relatime,discard,space_cache,subvolid"
+ test_roundtrip_mount "discard=sync" "relatime,discard,space_cache,subvolid" "nodiscard" "relatime,space_cache,subvolid"
+
+ test_roundtrip_mount "enospc_debug" "relatime,space_cache,enospc_debug,subvolid" "noenospc_debug" "relatime,space_cache,subvolid"
+
+ test_should_fail "fatal_errors=pani"
+ # fatal_errors=bug is the default
+ test_roundtrip_mount "fatal_errors=panic" "relatime,space_cache,fatal_errors=panic,subvolid" "fatal_errors=bug" "relatime,space_cache,subvolid"
+
+ test_roundtrip_mount "flushoncommit" "relatime,flushoncommit,space_cache,subvolid" "noflushoncommit" "relatime,space_cache,subvolid"
+
+ # 2048 is the max_inline default value
+ test_roundtrip_mount "max_inline=1024" "relatime,max_inline=1024,space_cache" "max_inline=2048" "relatime,space_cache,subvolid"
+
+ test_roundtrip_mount "metadata_ratio=0" "relatime,space_cache,subvolid" "metadata_ratio=10" "space_cache,metadata_ratio=10,subvolid"
+
+ # ssd_spread implies ssd, while nossd_spread only disables ssd_spread
+ test_roundtrip_mount "ssd_spread" "relatime,ssd_spread,space_cache" "nossd" "relatime,nossd,space_cache,subvolid"
+ test_roundtrip_mount "ssd" "relatime,ssd,space_cache" "nossd" "relatime,nossd,space_cache,subvolid"
+ test_mount_opt "ssd" "relatime,ssd,space_cache"
+
+ test_should_fail "thread_pool=-10"
+ test_should_fail "thread_pool=0"
+ test_roundtrip_mount "thread_pool=10" "relatime,thread_pool=10,space_cache" "thread_pool=50" "relatime,thread_pool=50,space_cache"
+
+ test_roundtrip_mount "notreelog" "relatime,notreelog,space_cache" "treelog" "relatime,space_cache,subvolid"
+}
+
+# real QA test starts here
+_scratch_mkfs >/dev/null
+
+# create a subvolume that will be used later
+_scratch_mount
+$BTRFS_UTIL_PROG subvolume create "$SCRATCH_MNT/vol1" > /dev/null
+touch "$SCRATCH_MNT/vol1/file.txt"
+_scratch_unmount
+
+test_optional_kernel_features
+
+test_non_revertible_options
+
+test_revertible_options
+
+test_subvol
+
+echo "Silence is golden"
+
+status=0
+exit
diff --git a/tests/btrfs/219.out b/tests/btrfs/219.out
new file mode 100644
index 00000000..162074d3
--- /dev/null
+++ b/tests/btrfs/219.out
@@ -0,0 +1,2 @@
+QA output created by 219
+Silence is golden
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 3295856d..f4dbfafb 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -221,3 +221,4 @@
216 auto quick seed
217 auto quick trim dangerous
218 auto quick volume
+219 auto quick
--
2.28.0
