On Thu, Sep 19, 2019 at 06:08:15PM +0800, Yang Xu wrote:
> The two commands have obsoleted long time ago, they don't run
> on most systems. So I think we can remove them.
>
> Signed-off-by: Yang Xu <xuyang2018.jy@xxxxxxxxxxxxxx>
/me has never encountered either of these programs and thinks it's
totally fine to remove 148 and 149. I /think/ they're dead?
OTOH /me has never encountered either of these programs so someone who
knows what they were (are?) should comment about the likelihood of
"prepair" ever re-emerging zombie-like from the grave. :)
Reviewed-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
--D
> ---
> tests/xfs/148 | 93 --------------
> tests/xfs/148.out | 299 ----------------------------------------------
> tests/xfs/149 | 112 -----------------
> tests/xfs/149.out | 123 -------------------
> tests/xfs/group | 2 -
> 5 files changed, 629 deletions(-)
> delete mode 100755 tests/xfs/148
> delete mode 100644 tests/xfs/148.out
> delete mode 100755 tests/xfs/149
> delete mode 100644 tests/xfs/149.out
>
> diff --git a/tests/xfs/148 b/tests/xfs/148
> deleted file mode 100755
> index d9d7d221..00000000
> --- a/tests/xfs/148
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -#! /bin/bash
> -# SPDX-License-Identifier: GPL-2.0
> -# Copyright (c) 2006 Silicon Graphics, Inc. All Rights Reserved.
> -#
> -# FS QA Test No. 148
> -#
> -# Exercise xfs parallel repair on broken filesystems
> -# This is a clone of test 030 useing xfs_prepair64 instead of xfs_repair
> -#
> -seq=`basename $0`
> -seqres=$RESULT_DIR/$seq
> -echo "QA output created by $seq"
> -
> -here=`pwd`
> -tmp=/tmp/$$
> -status=1 # failure is the default!
> -
> -_cleanup()
> -{
> - cd /
> - _scratch_unmount 2>/dev/null
> - rm -f $tmp.*
> -}
> -
> -trap "_cleanup; exit \$status" 0 1 2 3 15
> -
> -# get standard environment, filters and checks
> -. ./common/rc
> -. ./common/filter
> -. ./common/repair
> -
> -[ -z "$XFS_PARALLEL_REPAIR64_PROG" ] && _notrun "parallel repair binary xfs_prepair64 is not installed"
> -
> -# force use of parallel repair
> -export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR64_PROG
> -
> -# nuke the superblock, AGI, AGF, AGFL; then try repair the damage
> -#
> -_check_ag()
> -{
> - for structure in 'sb 0' 'agf 0' 'agi 0' 'agfl 0'
> - do
> - echo "Corrupting $structure - setting bits to $1"
> - _check_repair $1 "$structure"
> - done
> -}
> -
> -# real QA test starts here
> -_supported_fs xfs
> -_supported_os Linux
> -
> -_require_scratch
> -_require_no_large_scratch_dev
> -
> -DSIZE="-dsize=100m"
> -
> -# first we need to ensure there are no bogus secondary
> -# superblocks between the primary and first secondary
> -# superblock (hanging around from earlier tests)...
> -#
> -
> -_scratch_mkfs_xfs $DSIZE >/dev/null 2>&1
> -if [ $? -ne 0 ] # probably don't have a big enough scratch
> -then
> - _notrun "SCRATCH_DEV too small, results would be non-deterministic"
> -else
> - _scratch_mount
> - src/feature -U $SCRATCH_DEV && \
> - _notrun "UQuota are enabled, test needs controlled sb recovery"
> - src/feature -G $SCRATCH_DEV && \
> - _notrun "GQuota are enabled, test needs controlled sb recovery"
> - src/feature -P $SCRATCH_DEV && \
> - _notrun "PQuota are enabled, test needs controlled sb recovery"
> - _scratch_unmount
> -fi
> -clear=""
> -eval `xfs_db -r -c "sb 1" -c stack $SCRATCH_DEV | $PERL_PROG -ne '
> - if (/byte offset (\d+), length (\d+)/) {
> - print "clear=", $1 / 512, "\n"; exit
> - }'`
> -[ -z "$clear" ] && echo "Cannot calculate length to clear"
> -src/devzero -v -1 -n "$clear" $SCRATCH_DEV >/dev/null
> -
> -# now kick off the real prepair test...
> -#
> -_scratch_mkfs_xfs $DSIZE | _filter_mkfs 2>$tmp.mkfs
> -. $tmp.mkfs
> -_check_ag 0
> -_check_ag -1
> -
> -# success, all done
> -status=0
> -exit
> diff --git a/tests/xfs/148.out b/tests/xfs/148.out
> deleted file mode 100644
> index c8fb5511..00000000
> --- a/tests/xfs/148.out
> +++ /dev/null
> @@ -1,299 +0,0 @@
> -QA output created by 148
> -meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
> -data = bsize=XXX blocks=XXX, imaxpct=PCT
> - = sunit=XXX swidth=XXX, unwritten=X
> -naming =VERN bsize=XXX
> -log =LDEV bsize=XXX blocks=XXX
> -realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
> -Corrupting sb 0 - setting bits to 0
> -Wrote X.XXKb (value 0x0)
> -Phase 1 - find and verify superblock...
> -bad primary superblock - bad magic number !!!
> -
> -attempting to find secondary superblock...
> -found candidate secondary superblock...
> -verified secondary superblock...
> -writing modified primary superblock
> -sb root inode value INO inconsistent with calculated value INO
> -resetting superblock root inode pointer to INO
> -sb realtime bitmap inode INO inconsistent with calculated value INO
> -resetting superblock realtime bitmap ino pointer to INO
> -sb realtime summary inode INO inconsistent with calculated value INO
> -resetting superblock realtime summary ino pointer to INO
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> - - found root inode chunk
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -Note - stripe unit (SU) and width (SW) fields have been reset.
> -Please set with mount -o sunit=<value>,swidth=<value>
> -done
> -Corrupting agf 0 - setting bits to 0
> -Wrote X.XXKb (value 0x0)
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> -bad magic # 0x0 for agf 0
> -bad version # 0 for agf 0
> -bad length 0 for agf 0, should be LENGTH
> -reset bad agf for ag 0
> -bad agbno AGBNO for btbno root, agno 0
> -bad agbno AGBNO for btbcnt root, agno 0
> - - found root inode chunk
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -done
> -Corrupting agi 0 - setting bits to 0
> -Wrote X.XXKb (value 0x0)
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> -bad magic # 0x0 for agi 0
> -bad version # 0 for agi 0
> -bad length # 0 for agi 0, should be LENGTH
> -reset bad agi for ag 0
> -bad agbno AGBNO for inobt root, agno 0
> -root inode chunk not found
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> -error following ag 0 unlinked list
> - - process known inodes and perform inode discovery...
> -imap claims in-use inode INO is free, correcting imap
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -done
> -Corrupting agfl 0 - setting bits to 0
> -Wrote X.XXKb (value 0x0)
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> - - found root inode chunk
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -done
> -Corrupting sb 0 - setting bits to -1
> -Wrote X.XXKb (value 0xffffffff)
> -Phase 1 - find and verify superblock...
> -bad primary superblock - bad magic number !!!
> -
> -attempting to find secondary superblock...
> -found candidate secondary superblock...
> -verified secondary superblock...
> -writing modified primary superblock
> -sb root inode value INO inconsistent with calculated value INO
> -resetting superblock root inode pointer to INO
> -sb realtime bitmap inode INO inconsistent with calculated value INO
> -resetting superblock realtime bitmap ino pointer to INO
> -sb realtime summary inode INO inconsistent with calculated value INO
> -resetting superblock realtime summary ino pointer to INO
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> - - found root inode chunk
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -Note - stripe unit (SU) and width (SW) fields have been reset.
> -Please set with mount -o sunit=<value>,swidth=<value>
> -done
> -Corrupting agf 0 - setting bits to -1
> -Wrote X.XXKb (value 0xffffffff)
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> -bad magic # 0xffffffff for agf 0
> -bad version # -1 for agf 0
> -bad sequence # -1 for agf 0
> -bad length -1 for agf 0, should be LENGTH
> -flfirst -1 in agf 0 too large (max = MAX)
> -fllast -1 in agf 0 too large (max = MAX)
> -reset bad agf for ag 0
> -freeblk count 1 != flcount -1 in ag 0
> -bad agbno AGBNO for btbno root, agno 0
> -bad agbno AGBNO for btbcnt root, agno 0
> - - found root inode chunk
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -done
> -Corrupting agi 0 - setting bits to -1
> -Wrote X.XXKb (value 0xffffffff)
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> -bad magic # 0xffffffff for agi 0
> -bad version # -1 for agi 0
> -bad sequence # -1 for agi 0
> -bad length # -1 for agi 0, should be LENGTH
> -reset bad agi for ag 0
> -bad agbno AGBNO for inobt root, agno 0
> -root inode chunk not found
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> -imap claims in-use inode INO is free, correcting imap
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -done
> -Corrupting agfl 0 - setting bits to -1
> -Wrote X.XXKb (value 0xffffffff)
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> - - zero log...
> - - scan filesystem freespace and inode maps...
> -bad agbno AGBNO in agfl, agno 0
> -bad agbno AGBNO in agfl, agno 0
> -bad agbno AGBNO in agfl, agno 0
> -bad agbno AGBNO in agfl, agno 0
> - - found root inode chunk
> -Phase 3 - for each AG...
> - - scan and clear agi unlinked lists...
> - - process known inodes and perform inode discovery...
> - - process newly discovered inodes...
> -Phase 4 - check for duplicate blocks...
> - - setting up duplicate extent list...
> - - clear lost+found (if it exists) ...
> - - clearing existing "lost+found" inode
> - - deleting existing "lost+found" entry
> - - check for inodes claiming duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> - - reset superblock...
> -Phase 6 - check inode connectivity...
> - - resetting contents of realtime bitmap and summary inodes
> - - ensuring existence of lost+found directory
> - - traversing filesystem starting at / ...
> - - traversal finished ...
> - - traversing all unattached subtrees ...
> - - traversals finished ...
> - - moving disconnected inodes to lost+found ...
> -Phase 7 - verify and correct link counts...
> -done
> diff --git a/tests/xfs/149 b/tests/xfs/149
> deleted file mode 100755
> index fbf66872..00000000
> --- a/tests/xfs/149
> +++ /dev/null
> @@ -1,112 +0,0 @@
> -#! /bin/bash
> -# SPDX-License-Identifier: GPL-2.0
> -# Copyright (c) 2000-2002 Silicon Graphics, Inc. All Rights Reserved.
> -#
> -# FS QA Test No. 149
> -#
> -# Exercise xfs_prepair - ensure repeated use doesn't corrupt
> -# This is a clone of test 031 using xfs_prepair instead of xfs_repair
> -#
> -seq=`basename $0`
> -seqres=$RESULT_DIR/$seq
> -echo "QA output created by $seq"
> -
> -here=`pwd`
> -tmp=/tmp/$$
> -status=1 # failure is the default!
> -trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
> -rm -f $seqres.full
> -
> -# get standard environment, filters and checks
> -. ./common/rc
> -. ./common/repair
> -. ./common/filter
> -
> -[ -z "$XFS_PARALLEL_REPAIR_PROG" ] && _notrun "parallel repair binary xfs_prepair is not installed"
> -
> -# force use of parallel repair
> -export XFS_REPAIR_PROG=$XFS_PARALLEL_REPAIR_PROG
> -
> -_check_repair()
> -{
> - echo "Repairing, round 0" >> $seqres.full
> - _scratch_xfs_repair 2>&1 | _filter_repair | tee -a $seqres.full >$tmp.0
> - for i in 1 2 3 4
> - do
> - echo "Repairing, iteration $i" | tee -a $seqres.full
> - _scratch_xfs_repair 2>&1 | _filter_repair >$tmp.$i
> - diff $tmp.0 $tmp.$i >> $seqres.full
> - if [ $? -ne 0 ]; then
> - echo "ERROR: repair round $i differs to round 0 (see $seqres.full)" | tee -a $seqres.full
> - break
> - fi
> - # echo all interesting stuff...
> - perl -ne '
> - s/(rebuilding directory inode) (\d+)/\1 INO/g;
> - s/internal log/<TYPEOF> log/g;
> - s/external log on \S+/<TYPEOF> log/g;
> - /^\S+/ && print;
> - ' $tmp.$i
> - done
> - echo
> -}
> -
> -# prototype file to create various directory forms
> -_create_proto()
> -{
> - total=$1
> - count=0
> -
> - # take inode size into account for non-shortform directories...
> - [ $total -gt 0 ] && total=`expr $total \* $isize / 512`
> -
> - cat >$tmp.proto <<EOF
> -DUMMY1
> -0 0
> -: root directory
> -d--777 3 1
> -lost+found d--755 3 1
> -$
> -EOF
> -
> - while [ $count -lt $total ]
> - do
> - let count=$count+1
> - cat >>$tmp.proto <<EOF
> -${count}_of_${total}_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ---755 3 1 /bin/true
> -EOF
> - done
> - echo '$' >>$tmp.proto
> -}
> -
> -# real QA test starts here
> -_supported_fs xfs
> -_supported_os Linux
> -
> -_require_scratch
> -_require_no_large_scratch_dev
> -
> -# sanity test - default + one root directory entry
> -# Note: must do this proto/mkfs now for later inode size calcs
> -_create_proto 0
> -echo "=== one entry (shortform)"
> -_scratch_mkfs_xfs -p $tmp.proto >$tmp.mkfs0 2>&1
> -_filter_mkfs <$tmp.mkfs0 >/dev/null 2>$tmp.mkfs
> -. $tmp.mkfs
> -_check_repair
> -
> -# block-form root directory & repeat
> -_create_proto 20
> -echo "=== twenty entries (block form)"
> -_scratch_mkfs_xfs -p $tmp.proto | _filter_mkfs >/dev/null 2>&1
> -_check_repair
> -
> -# leaf-form root directory & repeat
> -_create_proto 1000
> -echo "=== thousand entries (leaf form)"
> -_scratch_mkfs_xfs -p $tmp.proto | _filter_mkfs >/dev/null 2>&1
> -_check_repair
> -
> -# success, all done
> -status=0
> -exit
> diff --git a/tests/xfs/149.out b/tests/xfs/149.out
> deleted file mode 100644
> index 0c65cd98..00000000
> --- a/tests/xfs/149.out
> +++ /dev/null
> @@ -1,123 +0,0 @@
> -QA output created by 149
> -=== one entry (shortform)
> -Repairing, iteration 1
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 2
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 3
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 4
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -Phase 7 - verify and correct link counts...
> -done
> -
> -=== twenty entries (block form)
> -Repairing, iteration 1
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 2
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 3
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 4
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -
> -=== thousand entries (leaf form)
> -Repairing, iteration 1
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 2
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 3
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -Repairing, iteration 4
> -Phase 1 - find and verify superblock...
> -Phase 2 - using <TYPEOF> log
> -Phase 3 - for each AG...
> -Phase 4 - check for duplicate blocks...
> -Phase 5 - rebuild AG headers and trees...
> -Phase 6 - check inode connectivity...
> -rebuilding directory inode INO
> -Phase 7 - verify and correct link counts...
> -done
> -
> diff --git a/tests/xfs/group b/tests/xfs/group
> index a7ad300e..f4ebcd8c 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -145,8 +145,6 @@
> 145 dmapi
> 146 dmapi
> 147 dmapi
> -148 repair auto
> -149 repair auto
> 150 dmapi
> 151 dmapi
> 152 dmapi
> --
> 2.18.1
>
>
>
