From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
xfs/016 looks for corruption in the log when the log wraps. However,
it hardcodes the minimum log size and the "95%" point where it wants to
start the "nudge and check for corruption" part of the test. New
features require larger logs, which causes the test to fail when it
can't mkfs with the smaller log size and when that 95% point doesn't put
us within 20x "_log_traffic 2"s of the end of the log.
Fix the first problem by using the new min log size helper and replace
the 95% figure with an estimate of where we need to be to guarantee that
the 20x loop wraps the log.
Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
---
tests/xfs/016 | 50 ++++++++++++++++++++++++++++++++++++++------------
tests/xfs/016.out | 1 +
2 files changed, 39 insertions(+), 12 deletions(-)
diff --git a/tests/xfs/016 b/tests/xfs/016
index 3407a4b1..aed37dca 100755
--- a/tests/xfs/016
+++ b/tests/xfs/016
@@ -44,10 +44,21 @@ _block_filter()
_init()
{
+ echo "*** determine log size"
+ local sz_mb=50
+ local dsize="-d size=${sz_mb}m"
+ local lsize="-l size=$(_scratch_find_xfs_min_logblocks $dsize)b"
+ local force_opts="$dsize $lsize"
+ _scratch_mkfs_xfs $force_opts >> $seqres.full 2>&1
+
+ # set log_size and log_size_bb globally
+ log_size_bb=`_log_size`
+ log_size=$((log_size_bb * 512))
+ echo "log_size_bb = $log_size_bb log_size = $log_size" >> $seqres.full
+
echo "*** reset partition"
- $here/src/devzero -b 2048 -n 50 -v 198 $SCRATCH_DEV
+ $here/src/devzero -b 2048 -n $sz_mb -v 198 $SCRATCH_DEV # write 0xc6
echo "*** mkfs"
- force_opts="-dsize=50m -lsize=$log_size"
#
# Do not discard blocks as we check for patterns in free space.
#
@@ -65,6 +76,9 @@ _init()
. $tmp.mkfs
[ $logsunit -ne 0 ] && \
_notrun "Cannot run this test using log MKFS_OPTIONS specified"
+
+ # quotas generate extra log traffic so force it off
+ _qmount_option noquota
}
_log_traffic()
@@ -157,6 +171,7 @@ _check_corrupt()
# get standard environment, filters and checks
. ./common/rc
. ./common/filter
+. ./common/quota
# real QA test starts here
_supported_fs xfs
@@ -164,10 +179,6 @@ _supported_os Linux
rm -f $seqres.full
-# mkfs sizes
-log_size=3493888
-log_size_bb=`expr $log_size / 512`
-
_require_scratch
_init
@@ -188,18 +199,29 @@ echo "log sunit = $lsunit" >>$seqres.full
[ $head -eq 2 -o $head -eq $((lsunit/512)) ] || \
_fail "!!! unexpected initial log position $head vs. $((lsunit/512))"
-# find how how many blocks per op for 100 ops
+# find how how many blocks per op for 200 ops
# ignore the fact that it will also include an unmount record etc...
# this should be small overall
echo " lots of traffic for sampling" >>$seqres.full
-sample_size_ops=100
+sample_size_ops=200
_log_traffic $sample_size_ops
head1=`_log_head`
num_blocks=`expr $head1 - $head`
blocks_per_op=`echo "scale=3; $num_blocks / $sample_size_ops" | bc`
+echo "log position = $head1; old log position: $head" >> $seqres.full
echo "blocks_per_op = $blocks_per_op" >>$seqres.full
-num_expected_ops=`echo "$log_size_bb / $blocks_per_op" | bc`
+
+# Since this is a log wrapping test, it's critical to push the log head to
+# the point where it will wrap around within twenty rounds of log traffic.
+near_end_min=$(echo "$log_size_bb - (10 * $blocks_per_op / 1)" | bc)
+echo "near_end_min = $near_end_min" >>$seqres.full
+
+# Estimate the number of ops needed to get the log head close to but not past
+# near_end_min. We'd rather fall short and have to step our way closer to the
+# end than run past the end.
+num_expected_ops=$(( 8 * $(echo "$log_size_bb / $blocks_per_op" | bc) / 10))
echo "num_expected_ops = $num_expected_ops" >>$seqres.full
+
num_expected_to_go=`echo "$num_expected_ops - $sample_size_ops" | bc`
echo "num_expected_to_go = $num_expected_to_go" >>$seqres.full
@@ -208,13 +230,17 @@ _log_traffic $num_expected_to_go
head=`_log_head`
echo "log position = $head" >>$seqres.full
-# e.g. 3891
-near_end_min=`echo "0.95 * $log_size_bb" | bc | sed 's/\..*//'`
-echo "near_end_min = $near_end_min" >>$seqres.full
+# If we fell short of near_end_min, step our way towards it.
+while [ $head -lt $near_end_min ]; do
+ echo " bump traffic from $head towards $near_end_min" >> $seqres.full
+ _log_traffic 10 > /dev/null 2>&1
+ head=$(_log_head)
+done
[ $head -gt $near_end_min -a $head -lt $log_size_bb ] || \
_fail "!!! unexpected near end log position $head"
+# Try to wrap the log, checking for corruption with each advance.
for c in `seq 0 20`
do
echo " little traffic" >>$seqres.full
diff --git a/tests/xfs/016.out b/tests/xfs/016.out
index f7844cdf..f4c8f88d 100644
--- a/tests/xfs/016.out
+++ b/tests/xfs/016.out
@@ -1,4 +1,5 @@
QA output created by 016
+*** determine log size
*** reset partition
Wrote 51200.00Kb (value 0xc6)
*** mkfs
