On Thu, Jan 31, 2019 at 06:11:30PM -0800, Darrick J. Wong wrote:
> On Wed, Jan 23, 2019 at 03:34:54PM +0800, Zorro Lang wrote:
> > Support the splice syscall in fsstress.
> >
> > Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx>
> > ---
> > ltp/fsstress.c | 173 +++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 173 insertions(+)
> >
> > diff --git a/ltp/fsstress.c b/ltp/fsstress.c
> > index 99a1d733..c04feb78 100644
> > --- a/ltp/fsstress.c
> > +++ b/ltp/fsstress.c
> > @@ -85,6 +85,7 @@ typedef enum {
> > OP_RMDIR,
> > OP_SETATTR,
> > OP_SETXATTR,
> > + OP_SPLICE,
> > OP_STAT,
> > OP_SYMLINK,
> > OP_SYNC,
> > @@ -194,6 +195,7 @@ void resvsp_f(int, long);
> > void rmdir_f(int, long);
> > void setattr_f(int, long);
> > void setxattr_f(int, long);
> > +void splice_f(int, long);
> > void stat_f(int, long);
> > void symlink_f(int, long);
> > void sync_f(int, long);
> > @@ -244,6 +246,7 @@ opdesc_t ops[] = {
> > { OP_RMDIR, "rmdir", rmdir_f, 1, 1 },
> > { OP_SETATTR, "setattr", setattr_f, 0, 1 },
> > { OP_SETXATTR, "setxattr", setxattr_f, 1, 1 },
> > + { OP_SPLICE, "splice", splice_f, 1, 1 },
> > { OP_STAT, "stat", stat_f, 1, 0 },
> > { OP_SYMLINK, "symlink", symlink_f, 2, 1 },
> > { OP_SYNC, "sync", sync_f, 1, 1 },
> > @@ -2764,6 +2767,176 @@ setxattr_f(int opno, long r)
> > #endif
> > }
> >
> > +void
> > +splice_f(int opno, long r)
> > +{
> > + struct pathname fpath1;
> > + struct pathname fpath2;
> > + struct stat64 stat1;
> > + struct stat64 stat2;
> > + char inoinfo1[1024];
> > + char inoinfo2[1024];
> > + loff_t lr;
> > + loff_t off1, off2;
> > + size_t len;
> > + loff_t offset1, offset2;
> > + size_t length;
> > + size_t total;
> > + int v1;
> > + int v2;
> > + int fd1;
> > + int fd2;
> > + ssize_t ret1 = 0, ret2 = 0;
> > + size_t bytes;
> > + int e;
> > + int filedes[2];
> > +
> > + /* Load paths */
> > + init_pathname(&fpath1);
> > + if (!get_fname(FT_REGm, r, &fpath1, NULL, NULL, &v1)) {
> > + if (v1)
> > + printf("%d/%d: splice read - no filename\n",
> > + procid, opno);
> > + goto out_fpath1;
> > + }
> > +
> > + init_pathname(&fpath2);
> > + if (!get_fname(FT_REGm, random(), &fpath2, NULL, NULL, &v2)) {
> > + if (v2)
> > + printf("%d/%d: splice write - no filename\n",
> > + procid, opno);
> > + goto out_fpath2;
> > + }
> > +
> > + /* Open files */
> > + fd1 = open_path(&fpath1, O_RDONLY);
> > + e = fd1 < 0 ? errno : 0;
> > + check_cwd();
> > + if (fd1 < 0) {
> > + if (v1)
> > + printf("%d/%d: splice read - open %s failed %d\n",
> > + procid, opno, fpath1.path, e);
> > + goto out_fpath2;
> > + }
> > +
> > + fd2 = open_path(&fpath2, O_WRONLY);
> > + e = fd2 < 0 ? errno : 0;
> > + check_cwd();
> > + if (fd2 < 0) {
> > + if (v2)
> > + printf("%d/%d: splice write - open %s failed %d\n",
> > + procid, opno, fpath2.path, e);
> > + goto out_fd1;
> > + }
> > +
> > + /* Get file stats */
> > + if (fstat64(fd1, &stat1) < 0) {
> > + if (v1)
> > + printf("%d/%d: splice read - fstat64 %s failed %d\n",
> > + procid, opno, fpath1.path, errno);
> > + goto out_fd2;
> > + }
> > + inode_info(inoinfo1, sizeof(inoinfo1), &stat1, v1);
> > +
> > + if (fstat64(fd2, &stat2) < 0) {
> > + if (v2)
> > + printf("%d/%d: splice write - fstat64 %s failed %d\n",
> > + procid, opno, fpath2.path, errno);
> > + goto out_fd2;
> > + }
> > + inode_info(inoinfo2, sizeof(inoinfo2), &stat2, v2);
> > +
> > + /* Calculate offsets */
> > + len = (random() % FILELEN_MAX) + 1;
> > + if (len == 0)
> > + len = stat1.st_blksize;
> > + if (len > stat1.st_size)
> > + len = stat1.st_size;
> > +
> > + lr = ((int64_t)random() << 32) + random();
> > + if (stat1.st_size == len)
> > + off1 = 0;
> > + else
> > + off1 = (off64_t)(lr % MIN(stat1.st_size - len, MAXFSIZE));
> > + off1 %= maxfsize;
> > +
> > + /*
> > + * splice can overlap write, so the offset of the target file can be
> > + * any number (< maxfsize)
> > + */
>
> Er... sorry I've been offline for a couple of weeks due to illness and
> so was not able to comment on this patch until now, but I've had a
> problem with my overnight fstests runs:
>
> > + lr = ((int64_t)random() << 32) + random();
>
> This generates a pseudorandom 64-bit candidate offset for the
> destination file where we'll land the splice data...
>
> > + off2 = (off64_t)(lr % maxfsize);
>
> ...and this caps the offset at maxfsize (which is 2^63- 1 on x64), which
> effectively means that the data will appear at a very high file offset,
> which creates large (sparse) files very quickly.
>
> Contrast this to other functions like clonerange_f, which add an
> additional clamp of 1024 blocks past the current dest file EOF:
>
> max_off2 = MIN(stat2.st_size + (1024ULL * stat2.st_blksize), MAXFSIZE);
> do {
> lr = ((int64_t)random() << 32) + random();
> off2 = (off64_t)(lr % max_off2);
> off2 %= maxfsize;
> ...
> }
>
> or truncate_f, which clamps to both 1MB past EOF and MAXFSIZE:
>
> lr = ((int64_t)random() << 32) + random();
> off = (off64_t)(lr % MIN(stb.st_size + (1024 * 1024), MAXFSIZE));
> off %= maxfsize;
>
> IOWs, I think we try to grow the fsstress file sizes fairly slowly so
> that gigantic files don't suddenly jump out of the bushes:
>
> 0/487: splice d3/d9/f2c[6319385 1 0 0 176 1395200] [860317,88612] ->
> d3/d9/dd/d1c/d21/f4b[1111 1 0 0 0 1408811] [8492675175361853476,88612] 0
>
> Yikes, it wrote 88,612 bytes of data at offset 8,492,675,175,361,853,476!
>
> This causes shared/009 to take forever to run, because it runs fsstress
> to generate some files, and then uses md5sum to ensure that duperemove
> doesn't corrupt files. Unfortunately it takes a very long time to
> read an entire 8500 petabyte file.
Wow, you're right! I didn't think that large sparse file will cause this
problem. This patch has been merged, I'll send another patch to fix it.
Thanks very much,
Zorro
>
> --D
>
> > +
> > + /*
> > + * Due to len, off1 and off2 will be changed later, so record the
> > + * original number at here
> > + */
> > + length = len;
> > + offset1 = off1;
> > + offset2 = off2;
> > +
> > + /* Pipe initialize */
> > + if (pipe(filedes) < 0) {
> > + if (v1 || v2) {
> > + printf("%d/%d: splice - pipe failed %d\n",
> > + procid, opno, errno);
> > + goto out_fd2;
> > + }
> > + }
> > +
> > + bytes = 0;
> > + total = 0;
> > + while (len > 0) {
> > + /* move to pipe buffer */
> > + ret1 = splice(fd1, &off1, filedes[1], NULL, len, 0);
> > + if (ret1 < 0) {
> > + break;
> > + }
> > + bytes = ret1;
> > +
> > + /* move from pipe buffer to dst file */
> > + while (bytes > 0) {
> > + ret2 = splice(filedes[0], NULL, fd2, &off2, bytes, 0);
> > + if (ret2 < 0) {
> > + break;
> > + }
> > + bytes -= ret2;
> > + }
> > + if (ret2 < 0)
> > + break;
> > +
> > + len -= ret1;
> > + total += ret1;
> > + }
> > +
> > + if (ret1 < 0 || ret2 < 0)
> > + e = errno;
> > + else
> > + e = 0;
> > + if (v1 || v2) {
> > + printf("%d/%d: splice %s%s [%lld,%lld] -> %s%s [%lld,%lld] %d",
> > + procid, opno,
> > + fpath1.path, inoinfo1, (long long)offset1, (long long)length,
> > + fpath2.path, inoinfo2, (long long)offset2, (long long)length, e);
> > +
> > + if (length && length > total)
> > + printf(" asked for %lld, spliced %lld??\n",
> > + (long long)length, (long long)total);
> > + printf("\n");
> > + }
> > +
> > + close(filedes[0]);
> > + close(filedes[1]);
> > +out_fd2:
> > + close(fd2);
> > +out_fd1:
> > + close(fd1);
> > +out_fpath2:
> > + free_pathname(&fpath2);
> > +out_fpath1:
> > + free_pathname(&fpath1);
> > +}
> > +
> > void
> > creat_f(int opno, long r)
> > {
> > --
> > 2.17.2
> >
