On Mon, Oct 01, 2018 at 04:44:35PM +0800, Anand Jain wrote:
> We have a known bug in btrfs, that we let the device path be changed
> after the device has been mounted. So using this loop hole the new
> copied device would appears as if its mounted immediately after its
> been copied. So this test case reproduces this issue.
>
> For example:
>
> Initially.. /dev/mmcblk0p4 is mounted as /
>
> lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> mmcblk0 179:0 0 29.2G 0 disk
> |-mmcblk0p4 179:4 0 4G 0 part /
> |-mmcblk0p2 179:2 0 500M 0 part /boot
> |-mmcblk0p3 179:3 0 256M 0 part [SWAP]
> `-mmcblk0p1 179:1 0 256M 0 part /boot/efi
>
> btrfs fi show
> Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
> Total devices 1 FS bytes used 1.40GiB
> devid 1 size 4.00GiB used 3.00GiB path /dev/mmcblk0p4
>
> Copy mmcblk0 to sda
> dd if=/dev/mmcblk0 of=/dev/sda
>
> And immediately after the copy completes the change in the device
> superblock is notified which the automount scans using
> btrfs device scan and the new device sda becomes the mounted root
> device.
>
> lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> sda 8:0 1 14.9G 0 disk
> |-sda4 8:4 1 4G 0 part /
> |-sda2 8:2 1 500M 0 part
> |-sda3 8:3 1 256M 0 part
> `-sda1 8:1 1 256M 0 part
> mmcblk0 179:0 0 29.2G 0 disk
> |-mmcblk0p4 179:4 0 4G 0 part
> |-mmcblk0p2 179:2 0 500M 0 part /boot
> |-mmcblk0p3 179:3 0 256M 0 part [SWAP]
> `-mmcblk0p1 179:1 0 256M 0 part /boot/efi
> btrfs fi show /
> Label: none uuid: 07892354-ddaa-4443-90ea-f76a06accaba
> Total devices 1 FS bytes used 1.40GiB
> devid 1 size 4.00GiB used 3.00GiB path /dev/sda4
>
> The bug is quite nasty that you can't either unmount /dev/sda4 or
> /dev/mmcblk0p4. And the problem does not get solved until you take
> the sda out of the system on to another system to change its fsid using
> the 'btrfstune -u' command.
>
> Signed-off-by: Anand Jain <anand.jain@xxxxxxxxxx>
Looks like that the test will break the whole test env as it leaves an
unmountable $SCRATCH_MNT. I'd wait for the fix to get in first before
merging the test, in case it breaks normal regression tests. (I noticed
that the test is not in 'auto' group, so it's not that dangerous.)
Also, it'd be great if test can be reviewed by btrfs folks too!
> ---
> tests/btrfs/173 | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/173.out | 5 ++++
> tests/btrfs/group | 1 +
> 3 files changed, 78 insertions(+)
> create mode 100755 tests/btrfs/173
> create mode 100644 tests/btrfs/173.out
>
> diff --git a/tests/btrfs/173 b/tests/btrfs/173
> new file mode 100755
> index 000000000000..f59a62e206c3
> --- /dev/null
> +++ b/tests/btrfs/173
> @@ -0,0 +1,72 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright (c) 2018 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 173
> +#
> +# Fuzzy test for FS image duplication.
> +# Could be fixed by
> +# [patch] btrfs: harden agaist duplicate fsid
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_dev_pool 2
> +_scratch_dev_pool_get 2
> +
> +dev_foo=$(echo $SCRATCH_DEV_POOL | awk '{print $1}' | rev | cut -d"/" -f1 | rev)
> +dev_bar=$(echo $SCRATCH_DEV_POOL | awk '{print $2}' | rev | cut -d"/" -f1 | rev)
This doesn't work if the devices in SCRATCH_DEV_POOL are symlinks, e.g.
lvm devices: /dev/mapper/testvg-testlv1, dev_foo is "testvg-testlv1" in
this case.
> +
> +_mkfs_dev /dev/$dev_foo
But /dev/testvg-testlv1 isn't existed.
_short_dev and/or _real_dev is useful in this case. e.g.
dev_foo=$(echo $SCRATCH_DEV_POOL | awk '{print $1}')
# dev_foo is like "dm-1"
dev_foo=$(_short_dev $dev_foo)
# dev_foo is like "/dev/dm-1"
dev_foo=$(_real_dev $dev_foo)
> +_mount /dev/$dev_foo $SCRATCH_MNT
It'd better to mount non-SCRATCH_DEV to other mount point, e.g.
$TEST_DIR/$seq.mnt
Thanks,
Eryu
> +
> +echo mount before btrfs image clone | tee -a $seqres.full
> +findmnt /dev/$dev_foo | grep -v TARGET | awk '{print $1" "$2}' | \
> + sed -e "s/$dev_foo/dev_foo/g" | _filter_scratch | tee -a $seqres.full
> +findmnt /dev/$dev_bar | grep -v TARGET | awk '{print $1" "$2}' | \
> + sed -e "s/$dev_bar/dev_bar/g" | _filter_scratch | tee -a $seqres.full
> +
> +for sb_bytenr in 65536 67108864
> +do
> + echo -n "dd status=none if=/dev/$dev_foo of=/dev/$dev_bar bs=1 "\
> + "seek=$sb_bytenr skip=$sb_bytenr count=4096" >> $seqres.full
> + dd status=none if=/dev/$dev_foo of=/dev/$dev_bar bs=1 seek=$sb_bytenr \
> + skip=$sb_bytenr count=4096 >> $seqres.full 2>&1
> + echo ..:$? >> $seqres.full
> +done
> +
> +echo mount after btrfs image clone | tee -a $seqres.full
> +findmnt /dev/$dev_foo | grep -v TARGET | awk '{print $1" "$2}' | \
> + sed -e "s/$dev_foo/dev_foo/g" | _filter_scratch | tee -a $seqres.full
> +findmnt /dev/$dev_bar | grep -v TARGET | awk '{print $1" "$2}' | \
> + sed -e "s/$dev_bar/dev_bar/g" | _filter_scratch | tee -a $seqres.full
> +
> +_scratch_dev_pool_put
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/btrfs/173.out b/tests/btrfs/173.out
> new file mode 100644
> index 000000000000..a2ef7a26f4b9
> --- /dev/null
> +++ b/tests/btrfs/173.out
> @@ -0,0 +1,5 @@
> +QA output created by 173
> +mount before btrfs image clone
> +SCRATCH_MNT /dev/dev_foo
> +mount after btrfs image clone
> +SCRATCH_MNT /dev/dev_foo
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 45782565c3b7..b2f1393f3e97 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -175,3 +175,4 @@
> 170 auto quick snapshot
> 171 auto quick qgroup
> 172 auto quick punch
> +173 volume
> --
> 1.8.3.1
>
