On Fri, Jun 01, 2018 at 04:07:32PM +0800, Zorro Lang wrote:
> This case does dedupe on a dir, then copy the dir to next dir. Dedupe
> the next dir again, then copy this dir to next again, and dedupe
> again ... At the end, verify the data in the last dir is still same
> with the first one.
>
> Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx>
> ---
> tests/shared/009 | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/shared/009.out | 4 ++
> tests/shared/group | 1 +
> 3 files changed, 119 insertions(+)
> create mode 100755 tests/shared/009
> create mode 100644 tests/shared/009.out
>
> diff --git a/tests/shared/009 b/tests/shared/009
> new file mode 100755
> index 00000000..f1f9215f
> --- /dev/null
> +++ b/tests/shared/009
> @@ -0,0 +1,114 @@
> +#! /bin/bash
> +# FS QA Test 009
> +#
> +# Iterate dedupe integrity test
I think this needs better test description :)
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2018 Red Hat Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +. ./common/reflink
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# duperemove only supports btrfs and xfs (with reflink feature).
> +# Add other filesystems if it supports more later.
> +_supported_fs xfs btrfs
> +_supported_os Linux
> +_require_scratch_dedupe
> +_require_command "$DUPEREMOVE_PROG" duperemove
> +
> +_scratch_mkfs > $seqres.full 2>&1
> +_scratch_mount >> $seqres.full 2>&1
> +
> +function iterate_dedup_verify()
> +{
> + local src=$srcdir
> + local dest=$dupdir/1
> +
> + for ((index = 1; index <= times; index++))
> + do
for ...; do
...
done
And I suspect that we don't get much extra test coverage by repeating
too many times, maybe reduce $times to just a few to save some test
time?
> + cp -a $src $dest
> + find $dest -type f -exec md5sum {} \; \
> + > $md5file$index
> + # Too many output, so only save error output
> + $DUPEREMOVE_PROG -dr --dedupe-options=same $dupdir \
> + >/dev/null 2>$seqres.full
> + md5sum -c --quiet $md5file$index
> + src=$dest
> + dest=$dupdir/$((index + 1))
> + done
> +}
> +
> +srcdir=$SCRATCH_MNT/src
> +dupdir=$SCRATCH_MNT/dup
> +mkdir $srcdir $dupdir
> +
> +md5file=$TEST_DIR/${seq}md5.sum
> +
> +fsstress_opts="-w -r -f mknod=0"
Why "-f mknod=0"? Need a comment.
> +# Create some files to be original data
> +$FSSTRESS_PROG $fsstress_opts -d $srcdir \
> + -n 200 -p $((5 * LOAD_FACTOR)) >/dev/null 2>&1
> +
> +# Calculate how many test cycles will be run
> +src_size=`du -ks $srcdir | awk '{print $1}'`
> +free_size=`df -kP $SCRATCH_MNT | grep -v Filesystem | awk '{print $4}'`
> +times=$((free_size / src_size))
> +if [ $times -gt $((10 * TIME_FACTOR)) ]; then
> + times=$((10 * TIME_FACTOR))
> +fi
> +
> +echo "= Do dedup and verify ="
> +iterate_dedup_verify
> +
> +# Use the last checksum file to verify the original data
> +sed -e s#dup/$times#src#g $md5file$times > $md5file
> +echo "= Backwords verify ="
> +md5sum -c --quiet $md5file
> +
> +# read from the disk also doesn't show mutations.
> +_scratch_cycle_mount
> +echo "= Verify after cycle mount ="
> +for ((index = 1; index <= times; index++))
> +do
Same here for the "for" format.
> + md5sum -c --quiet $md5file$index
> +done
> +
> +status=0
> +exit
> diff --git a/tests/shared/009.out b/tests/shared/009.out
> new file mode 100644
> index 00000000..44a78ba3
> --- /dev/null
> +++ b/tests/shared/009.out
> @@ -0,0 +1,4 @@
> +QA output created by 009
> += Do dedup and verify =
> += Backwords verify =
> += Verify after cycle mount =
> diff --git a/tests/shared/group b/tests/shared/group
> index de7fe79f..2255844b 100644
> --- a/tests/shared/group
> +++ b/tests/shared/group
> @@ -11,6 +11,7 @@
> 006 auto enospc
> 007 dangerous_fuzzers
> 008 auto quick dedupe
> +009 auto dedupe
All other 'dedupe' tests are in 'clone' group too, add it?
Thanks,
Eryu
> 032 mkfs auto quick
> 272 auto enospc rw
> 289 auto quick
> --
> 2.14.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
