Verify if the superblock corruption is handled correctly.
Signed-off-by: Anand Jain <anand.jain@xxxxxxxxxx>
---
v1->v2:
$subject slightly changed
Added more info about the test-case
Keep the stuff from the ./new btrfs
Add mount_opt_minus_args() to get the options (if) set at the config file
Move DEV_GOOD & DEV_BAD to where it starts to use
To help debugging added run_check where possible
Remove {} in the out file
Use _filter_error_mount for mount fail cases other than -EINVAL
tests/btrfs/159 | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/btrfs/159.out | 23 +++++++
tests/btrfs/group | 1 +
3 files changed, 201 insertions(+)
create mode 100755 tests/btrfs/159
create mode 100644 tests/btrfs/159.out
diff --git a/tests/btrfs/159 b/tests/btrfs/159
new file mode 100755
index 000000000000..521cfdab0242
--- /dev/null
+++ b/tests/btrfs/159
@@ -0,0 +1,177 @@
+#! /bin/bash
+# FS QA Test 159
+#
+# Test if the superblock corruption is handled correctly:
+# - Test fsid miss-match (csum ok) between primary and copy superblock
+# Fixed by the ML patch:
+# btrfs: check if the fsid in the primary sb and copy sb are same
+# - Test if the mount fails if the primary superblock csum is
+# corrupted on any disk
+# - Test if the mount does not fail if the copy1 sb csum is corrupted
+# Fixed by the ML patches:
+# btrfs: verify superblock checksum during scan
+# btrfs: verify checksum for all devices in mount context
+#
+#---------------------------------------------------------------------
+# Copyright (c) 2018 Oracle. All Rights Reserved.
+# Author: Anand Jain <anand.jain@xxxxxxxxxx>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+ _scratch_dev_pool_put
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/module
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch_dev_pool 2
+_require_loadable_fs_module "btrfs"
+_require_command "$WIPEFS_PROG" wipefs
+
+_scratch_dev_pool_get 2
+
+mount_opt_minus_args()
+{
+ local nr
+ local mnt_opt=""
+
+ nr=`_scratch_mount_options | awk '{print NF}'`
+ if [ $nr -eq 4 ]; then
+ #gets only the mount option set in the config file
+ mnt_opt=`_scratch_mount_options | awk '{print $2}'`
+ fi
+ #Append the additional opts provide as func args.
+ #Make sure -o is not echo-ed if both config file mnt-option
+ #and the test case mnt-option are null.
+ if [ -z $mnt_opt ]; then
+ if [ ! -z $* ]; then
+ echo "-o $*"
+ fi
+ else
+ if [ -z $* ]; then
+ echo "-o $mnt_opt"
+ else
+ echo "-o $mnt_opt,$*"
+ fi
+ fi
+}
+
+wipe()
+{
+ $WIPEFS_PROG -a $DEV_GOOD > /dev/null 2>&1
+ $WIPEFS_PROG -a $DEV_BAD > /dev/null 2>&1
+}
+
+# Test for fsid miss-match (csum ok) with primary and copy superblock.
+check_copy1_fsid()
+{
+ local bytenr=67108864
+ echo -e "\\ncheck_copy1_fsid\\n" | tee -a $seqres.full
+
+ wipe
+ $MKFS_BTRFS_PROG -fq $DEV_GOOD
+ $MKFS_BTRFS_PROG -fq $DEV_BAD
+ _reload_fs_module "btrfs"
+
+ run_check dd status=none of=$DEV_BAD if=$DEV_GOOD ibs=1 obs=1\
+ skip=$bytenr seek=$bytenr count=4K
+
+ #must fail
+ _mount `mount_opt_minus_args` $DEV_BAD $SCRATCH_MNT 2>&1 | _filter_scratch_pool
+ #If mount didn't fail
+ _scratch_unmount > /dev/null 2>&1
+}
+
+# Test if the mount fails if the primary superblock csum is corrupted.
+check_primary()
+{
+ local bytenr=65536
+ echo -e "\\ncheck_primary\\n" | tee -a $seqres.full
+
+ wipe
+ _scratch_pool_mkfs "-mraid1 -draid1"
+ _reload_fs_module "btrfs"
+
+ #corrupt bytenr DEV_BAD
+ od -j$bytenr -N1 -An -x $DEV_BAD |\
+ dd status=none of=$DEV_BAD ibs=1 obs=1 seek=$bytenr count=1 conv=fsync
+
+ #must fail
+ _mount `mount_opt_minus_args device=$DEV_GOOD` $DEV_BAD $SCRATCH_MNT 2>&1 |\
+ _filter_error_mount
+
+ #If mount didn't fail
+ _scratch_unmount > /dev/null 2>&1
+}
+
+# If copy1 is corrupted we still should be able to mount, check that.
+check_copy1()
+{
+ local bytenr=67108864
+ echo -e "\\ncheck_copy1" | tee -a $seqres.full
+
+ wipe
+ _scratch_pool_mkfs "-mraid1 -draid1"
+ _reload_fs_module "btrfs"
+
+ #corrupt bytenr DEV_BAD
+ od -j$bytenr -N1 -An -x $DEV_BAD |\
+ dd status=none of=$DEV_BAD ibs=1 obs=1 seek=$bytenr count=1 conv=fsync
+
+ _mount `mount_opt_minus_args device=$DEV_GOOD` $DEV_BAD $SCRATCH_MNT 2>&1 |\
+ _filter_error_mount
+ _scratch_unmount
+}
+
+DEV_GOOD=$(echo $SCRATCH_DEV_POOL | awk '{print $1}')
+DEV_BAD=$(echo $SCRATCH_DEV_POOL | awk '{print $2}')
+
+check_copy1_fsid
+check_primary
+check_copy1
+
+echo -e "\\nReverse good and bad devices"
+# For csum verification on devid 2, reverse the good and bad disks.
+DEV_BAD=$(echo $SCRATCH_DEV_POOL | awk '{print $1}')
+DEV_GOOD=$(echo $SCRATCH_DEV_POOL | awk '{print $2}')
+check_primary
+check_copy1
+
+# success, all done
+status=0
+exit
diff --git a/tests/btrfs/159.out b/tests/btrfs/159.out
new file mode 100644
index 000000000000..3e7ba31929e6
--- /dev/null
+++ b/tests/btrfs/159.out
@@ -0,0 +1,23 @@
+QA output created by 159
+
+check_copy1_fsid
+
+mount: wrong fs type, bad option, bad superblock on SCRATCH_DEV,
+ missing codepage or helper program, or other error
+
+ In some cases useful info is found in syslog - try
+ dmesg | tail or so.
+
+check_primary
+
+mount: Structure needs cleaning
+
+check_copy1
+
+Reverse good and bad devices
+
+check_primary
+
+mount: Structure needs cleaning
+
+check_copy1
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 8007e07e9cbd..ba766f6b84f8 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -161,3 +161,4 @@
156 auto quick trim
157 auto quick raid
158 auto quick raid scrub
+159 auto quick
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
