Hook filesystem check helper to _check_test_fs and _check_scratch_fs
for checking consistency of underlying dirs of overlay filesystem.
These helpers works only if fsck.overlay exists.
This patch introduce OVERLAY_FSCK_OPTIONS use for check overlayfs like
OVERLAY_MOUNT_OPTIONS, and also introduce a mount point check helper in
common/rc to detect a dir is a mount point or not.
[ _check_test_fs/_check_scratch_fs part picked from Amir's patch, thanks ]
Signed-off-by: zhangyi (F) <yi.zhang@xxxxxxxxxx>
---
README.overlay | 10 ++++--
common/config | 4 +++
common/overlay | 99 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
common/rc | 18 +++++++++--
4 files changed, 127 insertions(+), 4 deletions(-)
diff --git a/README.overlay b/README.overlay
index dfb8234..3cbefab 100644
--- a/README.overlay
+++ b/README.overlay
@@ -22,6 +22,10 @@ the base fs should be pre-formatted before starting the -overlay run.
An easy way to accomplish this is by running './check <some test>' once,
before running './check -overlay'.
+'./check -overlay' support check overlay test and scratch dirs,
+OVERLAY_FSCK_OPTIONS should be set instead of FSCK_OPTIONS if fsck
+options need to given directly.
+
Because of the lack of mkfs support, multi-section config files are only
partly supported with './check -overlay'. Only multi-section files that
do not change FSTYP and MKFS_OPTIONS can be safely used with -overlay.
@@ -40,7 +44,9 @@ run overlay tests on the same base fs, but with different mount options:
MOUNT_OPTIONS="-o pquota"
TEST_FS_MOUNT_OPTS="-o noatime"
OVERLAY_MOUNT_OPTIONS="-o redirect_dir=off"
+ OVERLAY_FSCK_OPTIONS="-n redirect_dir=off"
In the example above, MOUNT_OPTIONS will be used to mount the base scratch fs,
-TEST_FS_MOUNT_OPTS will be used to mount the base test fs and
-OVERLAY_MOUNT_OPTIONS will be used to mount both test and scratch overlays.
+TEST_FS_MOUNT_OPTS will be used to mount the base test fs,
+OVERLAY_MOUNT_OPTIONS will be used to mount both test and scratch overlay and
+OVERLAY_FSCK_OPTIONS will be used to check both test and scratch overlay.
diff --git a/common/config b/common/config
index 71115bd..20f0e5f 100644
--- a/common/config
+++ b/common/config
@@ -566,6 +566,10 @@ _overlay_config_override()
# Set SCRATCH vars to overlay base and mount dirs inside base fs
export SCRATCH_DEV="$OVL_BASE_SCRATCH_MNT"
export SCRATCH_MNT="$OVL_BASE_SCRATCH_MNT/$OVL_MNT"
+
+ # Set fsck options, use default if user not set directly.
+ export FSCK_OPTIONS="$OVERLAY_FSCK_OPTIONS"
+ [ -z "$FSCK_OPTIONS" ] && _fsck_opts
}
_overlay_config_restore()
diff --git a/common/overlay b/common/overlay
index e1b07f4..5d01e5e 100644
--- a/common/overlay
+++ b/common/overlay
@@ -190,3 +190,102 @@ _overlay_fsck_dirs()
$FSCK_OVERLAY_PROG -o lowerdir=$lowerdir -o upperdir=$upperdir \
-o workdir=$workdir $*
}
+
+_overlay_check_dirs()
+{
+ local lowerdir=$1
+ local upperdir=$2
+ local workdir=$3
+ shift 3
+ local err=0
+
+ _overlay_fsck_dirs $lowerdir $upperdir $workdir \
+ $FSCK_OPTIONS $* >>$tmp.fsck 2>&1
+ if [ $? -ne 0 ]; then
+ _log_err "_overlay_check_fs: overlayfs on $lowerdir,$upperdir,$workdir is inconsistent"
+
+ echo "*** fsck.overlay output ***" >>$seqres.full
+ cat $tmp.fsck >>$seqres.full
+ echo "*** end fsck.overlay output" >>$seqres.full
+
+ echo "*** mount output ***" >>$seqres.full
+ _mount >>$seqres.full
+ echo "*** end mount output" >>$seqres.full
+
+ err=1
+ fi
+ rm -f $tmp.fsck
+
+ return $err
+}
+
+_overlay_check_fs()
+{
+ # The first arguments is overlay mount point use for checking
+ # overlay filesystem is mounted or not, the remaining arquments
+ # use for mounting overlay base filesystem if it was not mounted.
+ # We shift one to aligns arguments for _overlay_base_mount.
+ local ovl_mnt=$1
+ shift 1
+
+ local base_dev=$3
+ local base_mnt=$4
+
+ [ "$FSTYP" = overlay ] || return 0
+
+ # Base fs needs to be mounted to check overlay dirs
+ local base_fstype=""
+ local ovl_mounted=""
+
+ [ -z "$base_dev" ] || \
+ base_fstype=`_fs_type $base_dev`
+
+ # If base_dev is set but base_fstype is empty, base fs is not
+ # mounted, we need to mount base fs. Otherwise, we need to
+ # check and umount overlayfs if it was mounted.
+ if [ -n "$base_dev" -a -z "$base_fstype" ]; then
+ _overlay_base_mount $*
+ else
+ # Check and umount overlay for dir check
+ ovl_mounted=`_is_dir_mountpoint $ovl_mnt`
+ [ -z "$ovl_mounted" ] || $UMOUNT_PROG $ovl_mnt
+ fi
+
+ _overlay_check_dirs $base_mnt/$OVL_LOWER $base_mnt/$OVL_UPPER \
+ $base_mnt/$OVL_WORK
+ local ret=$?
+
+ if [ -n "$base_dev" -a -z "$base_fstype" ]; then
+ _overlay_base_unmount "$base_dev" "$base_mnt"
+ elif [ $ret -eq 0 -a -n "$ovl_mounted" ]; then
+ # overlay was mounted, remount besides extra mount options
+ _overlay_mount $base_mnt $ovl_mnt
+ ret=$?
+ fi
+
+ if [ $ret != 0 ]; then
+ status=1
+ if [ "$iam" != "check" ]; then
+ exit 1
+ fi
+ return 1
+ fi
+
+ return 0
+}
+
+_check_overlay_test_fs()
+{
+ _overlay_check_fs "$TEST_DIR" \
+ OVL_BASE_TEST_DEV OVL_BASE_TEST_DIR \
+ "$OVL_BASE_TEST_DEV" "$OVL_BASE_TEST_DIR" \
+ $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS
+}
+
+_check_overlay_scratch_fs()
+{
+ _overlay_check_fs "$SCRATCH_MNT" \
+ OVL_BASE_SCRATCH_DEV OVL_BASE_SCRATCH_MNT \
+ "$OVL_BASE_SCRATCH_DEV" "$OVL_BASE_SCRATCH_MNT" \
+ $OVL_BASE_MOUNT_OPTIONS $SELINUX_MOUNT_OPTIONS
+}
diff --git a/common/rc b/common/rc
index 1dae3bf..9317674 100644
--- a/common/rc
+++ b/common/rc
@@ -2395,6 +2395,20 @@ _is_dev_mounted()
findmnt -rncv -S $dev -t $fstype -o TARGET | head -1
}
+# check if the given dir is a mount point, if so, return mount point
+_is_dir_mountpoint()
+{
+ local dir=$1
+ local fstype=${2:-$FSTYP}
+
+ if [ $# -lt 1 ]; then
+ echo "Uasge: _is_dir_mountpoint <dir> [fstype]" 1>&2
+ exit 1
+ fi
+
+ findmnt -rncv -t $fstype -o TARGET $dir | head -1
+}
+
# remount a FS to a new mode (ro or rw)
#
_remount()
@@ -2590,7 +2604,7 @@ _check_test_fs()
# no way to check consistency for GlusterFS
;;
overlay)
- # no way to check consistency for overlay
+ _check_overlay_test_fs
;;
pvfs2)
;;
@@ -2648,7 +2662,7 @@ _check_scratch_fs()
# no way to check consistency for GlusterFS
;;
overlay)
- # no way to check consistency for overlay
+ _check_overlay_scratch_fs
;;
pvfs2)
;;
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
