Re: [PATCH] generic: add testcase to test fallocate & f{data,}sync

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]



On 2017/11/15 16:13, Eryu Guan wrote:
> On Mon, Nov 13, 2017 at 04:53:50PM +0800, Chao Yu wrote:
>> f2fs can skip isize updating in fsync(), since during mount, f2fs tries
>> to recovery isize according to valid block address or preallocated flag
>> in last fsynced dnode block.
>>
>> However, fallocate() breaks our rule with setting FALLOC_FL_KEEP_SIZE
>> flag, since it can preallocated block cross EOF, once the file is fsynced,
>> in POR, we will recover isize incorrectly based on these fallocated
>> blocks.
>>
>> This patch adds a new testcase to test fallocate, in order to verify
>> whether filesystem will do correct recovery on isize.
>>
>> Signed-off-by: Chao Yu <yuchao0@xxxxxxxxxx>
>> ---
>>  tests/generic/468     | 117 ++++++++++++++++++++++++++++++++++++++++++++++++++
>>  tests/generic/468.out |  13 ++++++
>>  tests/generic/group   |   1 +
>>  3 files changed, 131 insertions(+)
>>  create mode 100755 tests/generic/468
>>  create mode 100644 tests/generic/468.out
>>
>> diff --git a/tests/generic/468 b/tests/generic/468
>> new file mode 100755
>> index 000000000000..af3c5958750f
>> --- /dev/null
>> +++ b/tests/generic/468
>> @@ -0,0 +1,117 @@
>> +#! /bin/bash
>> +# FS QA Test 468
>> +#
>> +# Do test with fallocate, f{data,}sync, power-cuts, check inode's metadata
>> +# after filesystem recovery.
>> +# In the case of fsync, filesystem should recover all the inode metadata, while
>> +# recovering i_blocks and i_size at least for fdatasync.
> 
> Better to mention that this test is an fallocate variant of generic/392.
> 
>> +#
>> +#-----------------------------------------------------------------------
>> +# Copyright (c) 2017 Chao Yu.  All Rights Reserved.
> 
> I didn't pay much attention to copyright statement before, but Dave
> pointed out similar issue in one of his reviews: You're signing off this
> patch a Huawei employee, but claiming personal copyright. Please clarify
> who owns the copyright - if it's your personal copyright then please
> sign off with a personal email address, not your employer's.
> 
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation.
>> +#
>> +# This program is distributed in the hope that it would be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write the Free Software Foundation,
>> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
>> +#-----------------------------------------------------------------------
>> +#
>> +
>> +seq=`basename $0`
>> +seqres=$RESULT_DIR/$seq
>> +echo "QA output created by $seq"
>> +
>> +here=`pwd`
>> +tmp=/tmp/$$
>> +status=0	# failure is the default!
> 
> status=1 means "failure is the default!" :)
> 
> I noticed that you set status=1 explicitly on failure case, I don't
> think that's needed, just default to 'status=1' and set status=0 before
> exit in the end. The echos on failure case would break golden image
> anyway.

Have updated all of them, please help to check v2.

Thanks,

> 
> Thanks,
> Eryu
> 
>> +trap "_cleanup; exit \$status" 0 1 2 3 15
>> +
>> +_cleanup()
>> +{
>> +	cd /
>> +	rm -f $tmp.*
>> +}
>> +
>> +# get standard environment, filters and checks
>> +. ./common/rc
>> +. ./common/filter
>> +
>> +# remove previous $seqres.full before test
>> +rm -f $seqres.full
>> +
>> +# real QA test starts here
>> +
>> +# Modify as appropriate.
>> +_supported_fs generic
>> +_supported_os Linux
>> +_require_test
>> +
>> +_require_scratch
>> +_require_scratch_shutdown
>> +_require_xfs_io_command "falloc" "-k"
>> +
>> +_scratch_mkfs >/dev/null 2>&1
>> +_require_metadata_journaling $SCRATCH_DEV
>> +_scratch_mount
>> +
>> +testfile=$SCRATCH_MNT/testfile
>> +
>> +# check inode metadata after shutdown
>> +check_inode_metadata()
>> +{
>> +	sync_mode=$1
>> +
>> +	# fsync or fdatasync
>> +	if [ $sync_mode = "fsync" ]; then
>> +		stat_opt='-c "b: %b s: %s a: %x m: %y c: %z"'
>> +	else
>> +		stat_opt='-c "b: %b s: %s"'
>> +	fi
>> +
>> +	before=`stat "$stat_opt" $testfile`
>> +
>> +	$XFS_IO_PROG -c "$sync_mode" $testfile | _filter_xfs_io
>> +	src/godown $SCRATCH_MNT | tee -a $seqres.full
>> +	_scratch_cycle_mount
>> +
>> +	after=`stat "$stat_opt" $testfile`
>> +
>> +	if [ "$before" != "$after" ]; then
>> +		echo "Before: $before"
>> +		echo "After : $after"
>> +		status=1;	# this is a failure!
>> +	fi
>> +	echo "Before: $before" >> $seqres.full
>> +	echo "After : $after" >> $seqres.full
>> +	rm $testfile
>> +}
>> +
>> +# fallocate XX KB with f{data}sync, followed by power-cut
>> +test_falloc()
>> +{
>> +	echo "==== falloc $2$3 test with $1 ====" | tee -a $seqres.full
>> +	$XFS_IO_PROG -f -c "truncate 4202496"	\
>> +			-c "pwrite 0 4202496"	\
>> +			-c "fsync"		\
>> +			-c "falloc $2 4202496 $3"\
>> +			$testfile >/dev/null
>> +	check_inode_metadata $1
>> +}
>> +
>> +for i in fsync fdatasync; do
>> +	test_falloc $i "" 1024
>> +	test_falloc $i "" 4096
>> +	test_falloc $i "" 104857600
>> +	test_falloc $i "-k " 1024
>> +	test_falloc $i "-k " 4096
>> +	test_falloc $i "-k " 104857600
>> +done
>> +
>> +exit
>> diff --git a/tests/generic/468.out b/tests/generic/468.out
>> new file mode 100644
>> index 000000000000..b3a28d5ea07c
>> --- /dev/null
>> +++ b/tests/generic/468.out
>> @@ -0,0 +1,13 @@
>> +QA output created by 468
>> +==== falloc 1024 test with fsync ====
>> +==== falloc 4096 test with fsync ====
>> +==== falloc 104857600 test with fsync ====
>> +==== falloc -k 1024 test with fsync ====
>> +==== falloc -k 4096 test with fsync ====
>> +==== falloc -k 104857600 test with fsync ====
>> +==== falloc 1024 test with fdatasync ====
>> +==== falloc 4096 test with fdatasync ====
>> +==== falloc 104857600 test with fdatasync ====
>> +==== falloc -k 1024 test with fdatasync ====
>> +==== falloc -k 4096 test with fdatasync ====
>> +==== falloc -k 104857600 test with fdatasync ====
>> diff --git a/tests/generic/group b/tests/generic/group
>> index 9183950c8dfc..ea2dc04d931e 100644
>> --- a/tests/generic/group
>> +++ b/tests/generic/group
>> @@ -470,3 +470,4 @@
>>  465 auto rw quick aio
>>  466 auto quick rw
>>  467 auto quick exportfs
>> +468 shutdown auto quick metadata
>> -- 
>> 2.15.0.55.gc2ece9dc4de6
>>
> 
> .
> 

--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux