Re: [PATCH 2/6] common/xfs: refactor xfs_scrub presence testing

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]



On Wed, Oct 25, 2017 at 10:51:45PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> 
> Move all the requirements checking for xfs_scrub into a helper function.
> Make sure the helper properly detects the presence of the scrub ioctl
> and situations where we can't run scrub (e.g. norecovery).
> 
> Refactor the existing three xfs_scrub call sites to use the helper to
> check if it's appropriate to run scrub.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
> ---
>  README            |    6 +++---
>  common/rc         |    2 +-
>  common/xfs        |   40 +++++++++++++++++++++++++++++++++-------
>  tests/generic/453 |   11 +----------
>  tests/generic/454 |   11 +----------
>  5 files changed, 39 insertions(+), 31 deletions(-)
> 
> 
> diff --git a/README b/README
> index 4963d28..a9da4f0 100644
> --- a/README
> +++ b/README
> @@ -88,9 +88,9 @@ Preparing system for tests:
>                 run xfs_repair -n to check the filesystem; xfs_repair to rebuild
>                 metadata indexes; and xfs_repair -n (a third time) to check the
>                 results of the rebuilding.
> -             - set TEST_XFS_SCRUB=1 to have _check_xfs_filesystem run
> -               xfs_scrub -vd to scrub the filesystem metadata online before
> -               unmounting to run the offline check.
> +             - xfs_scrub, if present, will always check the test and scratch
> +               filesystems if they are still online at the end of the test.
> +               It is no longer necessary to set TEST_XFS_SCRUB.
>               - setenv LOGWRITES_DEV to a block device to use for power fail
>                 testing.

With xfs_scrub check enabled by default, I always see scrub failures
like this:

_check_xfs_filesystem: filesystem on /dev/vda5 failed scrub
(see /root/xfstests/results//check.full for details)
xfs_growfs: /mnt/testarea/test is not a mounted XFS filesystem
generic/445 1s ... 1s
_check_xfs_filesystem: filesystem on /dev/vda5 failed scrub
(see /root/xfstests/results//xfs_4k_crc/generic/445.full for details)
xfs_growfs: /mnt/testarea/test is not a mounted XFS filesystem
Ran: generic/445
Passed all 1 tests

And in check.full or 445.full:
*** xfs_scrub  -v -d -n output ***
Phase 1: Find filesystem geometry.
Info: /mnt/testarea/test: Kernel metadata scrub is required. (ioctl.c line 946)
Info: /mnt/testarea/test: Scrub aborted after phase 1. (scrub.c line 801)

And this happens to all tests and all test configs. Is this a known
issue of scrub?

The xfs_growfs message probably comes from _check_xfs_test_fs(), stderr
of xfs_growfs should go to the pipe too.

Thanks,
Eryu

>  
> diff --git a/common/rc b/common/rc
> index 1a4d81e..83aaced 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2091,7 +2091,7 @@ _require_xfs_io_command()
>  			_notrun "xfs_io $command support is missing"
>  		;;
>  	"scrub"|"repair")
> -		testio=`$XFS_IO_PROG -x -c "$command test 0" $TEST_DIR 2>&1`
> +		testio=`$XFS_IO_PROG -x -c "$command probe 0" $TEST_DIR 2>&1`
>  		echo $testio | grep -q "Inappropriate ioctl" && \
>  			_notrun "xfs_io $command support is missing"
>  		;;
> diff --git a/common/xfs b/common/xfs
> index dff8454..df7d029 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -298,6 +298,29 @@ _require_xfs_db_command()
>  		_notrun "xfs_db $command support is missing"
>  }
>  
> +# Does the filesystem mounted from a particular device support scrub?
> +_supports_xfs_scrub()
> +{
> +	mountpoint="$1"
> +	device="$2"
> +
> +	if [ ! -b "$device" ] || [ ! -e "$mountpoint" ]; then
> +		echo "Usage: _supports_xfs_scrub mountpoint device"
> +		exit 1
> +	fi
> +
> +	test "$FSTYP" = "xfs" || return 1
> +	test -x "$XFS_SCRUB_PROG" || return 1
> +
> +	# Probe for kernel support...
> +	$XFS_IO_PROG -x -c "scrub probe 0" "$mountpoint" 2>&1 | grep -q "Inappropriate ioctl" && return 1
> +
> +	# Scrub can't run on norecovery mounts
> +	_fs_options "$device" | grep -q "norecovery" && return 1
> +
> +	return 0
> +}
> +
>  # run xfs_check and friends on a FS.
>  _check_xfs_filesystem()
>  {
> @@ -330,14 +353,17 @@ _check_xfs_filesystem()
>  	type=`_fs_type $device`
>  	ok=1
>  
> -	if [ "$type" = "xfs" ]; then
> -		if [ -n "$TEST_XFS_SCRUB" ] && [ -x "$XFS_SCRUB_PROG" ]; then
> -			"$XFS_SCRUB_PROG" $scrubflag -v -d -n $device >>$seqres.full
> -			if [ $? -ne 0 ]; then
> -				_log_err "filesystem on $device failed scrub"
> -				ok=0
> -			fi
> +	# Run online scrub if we can.
> +	mntpt="$(_is_mounted $device)"
> +	if [ -n "$mntpt" ] && _supports_xfs_scrub "$mntpt" "$device"; then
> +		"$XFS_SCRUB_PROG" $scrubflag -v -d -n $device >>$seqres.full 2>&1
> +		if [ $? -ne 0 ]; then
> +			_log_err "filesystem on $device failed scrub"
> +			ok=0
>  		fi
> +	fi
> +
> +	if [ "$type" = "xfs" ]; then
>  		# mounted ...
>  		mountpoint=`_umount_or_remount_ro $device`
>  	fi
> diff --git a/tests/generic/453 b/tests/generic/453
> index ff29736..40fae91 100755
> --- a/tests/generic/453
> +++ b/tests/generic/453
> @@ -136,10 +136,7 @@ echo "Test XFS online scrub, if applicable"
>  
>  # Only run this on xfs if xfs_scrub is available and has the unicode checker
>  check_xfs_scrub() {
> -	# Ignore non-XFS fs or no scrub program...
> -	if [ "${FSTYP}" != "xfs" ] || [ ! -x "${XFS_SCRUB_PROG}" ]; then
> -		return 1
> -	fi
> +	_supports_xfs_scrub "$SCRATCH_MNT" "$SCRATCH_DEV" || return 1
>  
>  	# We only care if xfs_scrub has unicode string support...
>  	if ! type ldd > /dev/null 2>&1 || \
> @@ -147,12 +144,6 @@ check_xfs_scrub() {
>  		return 1
>  	fi
>  
> -	# Does the ioctl work?
> -	if $XFS_IO_PROG -x -c "scrub probe 0" $SCRATCH_MNT 2>&1 | \
> -	   grep -q "Inappropriate ioctl"; then
> -		return 1
> -	fi
> -
>  	return 0
>  }
>  
> diff --git a/tests/generic/454 b/tests/generic/454
> index 01279ee..462185a 100755
> --- a/tests/generic/454
> +++ b/tests/generic/454
> @@ -132,10 +132,7 @@ echo "Test XFS online scrub, if applicable"
>  
>  # Only run this on xfs if xfs_scrub is available and has the unicode checker
>  check_xfs_scrub() {
> -	# Ignore non-XFS fs or no scrub program...
> -	if [ "${FSTYP}" != "xfs" ] || [ ! -x "${XFS_SCRUB_PROG}" ]; then
> -		return 1
> -	fi
> +	_supports_xfs_scrub "$SCRATCH_MNT" "$SCRATCH_DEV" || return 1
>  
>  	# We only care if xfs_scrub has unicode string support...
>  	if ! type ldd > /dev/null 2>&1 || \
> @@ -143,12 +140,6 @@ check_xfs_scrub() {
>  		return 1
>  	fi
>  
> -	# Does the ioctl work?
> -	if $XFS_IO_PROG -x -c "scrub probe 0" $SCRATCH_MNT 2>&1 | \
> -	   grep -q "Inappropriate ioctl"; then
> -		return 1
> -	fi
> -
>  	return 0
>  }
>  
> 
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux