As posix standard, if the file offset is at or past the end of file,
no bytes are read, and read() returns zero. But there was a bug,
when DIO read offset is just past the EOF a little, but in the same
block with EOF, read returns different negative values.
Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx>
---
Hi,
V2 did below changes:
1) move falloc, resvsp, allocsp related test to be special test,
no standard output
2) pick up pread related test into read_test() function
Thanks,
Zorro
tests/generic/450 | 171 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/450.out | 50 +++++++++++++++
tests/generic/group | 1 +
3 files changed, 222 insertions(+)
create mode 100755 tests/generic/450
create mode 100644 tests/generic/450.out
diff --git a/tests/generic/450 b/tests/generic/450
new file mode 100755
index 00000000..5fbe7f0c
--- /dev/null
+++ b/tests/generic/450
@@ -0,0 +1,171 @@
+#! /bin/bash
+# FS QA Test 450
+#
+# Test read around EOF. If the file offset is at or past the end of file,
+# no bytes are read, and read() returns zero. But there was a bug, when
+# DIO read offset is just past the EOF a little, but in the same block
+# with EOF, read returns different negative values.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+ rm -f $tfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_supported_os Linux
+_require_test
+
+tfile=$TEST_DIR/testfile_${seq}
+ssize=`blockdev --getss $TEST_DEV`
+bsize=`_get_block_size $TEST_DIR`
+
+rm -f $tfile 2>/dev/null
+
+# check xfs_io pread result, especially for
+# Param1: expected pread return
+# Param2: expected pread count
+# Param3: expected pread offset
+#
+# If any of above values are not as expected, the output keeps
+# using the real value
+check_xfs_io_read()
+{
+ RETURN=$1
+ COUNT=$2
+ OFFSET=$3
+
+ $AWK_PROG -v ret="$RETURN" -v cnt="$COUNT" -v off="$OFFSET" '
+ /read/{
+ split($2, bytes, "/")
+
+ retval=bytes[1]
+ count=bytes[2]
+ offset=$NF
+
+ if(retval == ret) retval="X"
+ if(count == cnt) count="XX"
+ if(offset == off) offset="XXX"
+
+ printf("read [%s/%s %s]\n", retval, count, offset)
+
+ next
+ }
+ '
+}
+
+
+# +-----------------------------------------+
+# | block | block | block |
+# +------------------------------------------
+# | sect | sect | sect | sect | sect | sect |
+# |
+# EOF
+# |<----------- move EOF --------->| xxxxxx |
+# [pread1]
+# [ pread2 ]
+# [pread3] ... [pread4]
+#
+# Run below steps with differnt $operation and $openflag
+#
+# 1) use $operation (alloc/reserve/truncate ...) to move EOF
+# 2) read (pread1) the first sector doesn't contain EOF
+# 3) read (pread2) the 2nd and 3rd blocks contain EOF
+# 4) read (pread3) the last sector which just out of EOF
+# 5) read (pread4) at far far away from EOF
+#
+# NOTE: This case generally test on sector size < block size, but equal is fine
+#
+asize=$((bsize * 3))
+tsize=$((asize - ssize - 100))
+
+read_test()
+{
+ $XFS_IO_PROG $oflag -c "pread 0 $ssize" $tfile | \
+ check_xfs_io_read "$ssize" "$ssize" "0"
+
+ $XFS_IO_PROG $oflag -c "pread $bsize $((bsize * 2))" $tfile | \
+ check_xfs_io_read "$((tsize - bsize))" "$((bsize * 2))" "$bsize"
+
+ $XFS_IO_PROG $oflag -c "pread $((bsize * 3 - ssize)) $ssize" $tfile | \
+ check_xfs_io_read "0" "$ssize" "$((bsize * 3 - ssize))"
+
+ $XFS_IO_PROG $oflag -c "pread $((bsize * 100)) $ssize" $tfile | \
+ check_xfs_io_read "0" "$ssize" "$((bsize * 100))"
+}
+
+# Generic test
+for oflag in "" "-d" "-s" "-sd"; do
+ for oper in "pwrite 0 ${tsize}" "truncate ${tsize}"; do
+ echo "## Test ${oper%% *} and read with open ${oflag} ##" | \
+ tee -a $seqres.full
+
+ $XFS_IO_PROG -ft -c "$oper" $tfile >>$seqres.full
+
+ read_test
+
+ echo | tee -a $seqres.full
+ done
+done
+
+# XFS test
+echo "## Extra testing, no output is expected below ##"
+for oflag in "" "-d" "-s" "-sd"; do
+ for oper in "falloc 0 ${tsize}" \
+ "resvsp 0 ${asize}" \
+ "allocsp ${tsize} 0"; do
+ echo "## Test ${oper%% *} and read with open ${oflag} ##" >> $seqres.full
+
+ # Drop all output, for some filesystems don't support these
+ # test operations
+ $XFS_IO_PROG -ft -c "truncate ${tsize}" -c "$oper" $tfile >>$seqres.full 2>&1
+
+ # For keeping golden image consistency in different filesystems,
+ # drop the output, but not error output
+ read_test >>$seqres.full
+
+ echo >> $seqres.full
+ done
+done
+
+# success, all done
+status=0
+exit
diff --git a/tests/generic/450.out b/tests/generic/450.out
new file mode 100644
index 00000000..ad2570e8
--- /dev/null
+++ b/tests/generic/450.out
@@ -0,0 +1,50 @@
+QA output created by 450
+## Test pwrite and read with open ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test truncate and read with open ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test pwrite and read with open -d ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test truncate and read with open -d ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test pwrite and read with open -s ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test truncate and read with open -s ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test pwrite and read with open -sd ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Test truncate and read with open -sd ##
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+read [X/XX XXX]
+
+## Extra testing, no output is expected below ##
diff --git a/tests/generic/group b/tests/generic/group
index a04cc900..0b29be0a 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -452,3 +452,4 @@
447 auto quick clone
448 auto quick rw
449 auto quick acl enospc
+450 auto quick rw
--
2.13.3
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
