On Tue, May 02, 2017 at 03:37:15PM +0100, Filipe Manana wrote:
> On Fri, Apr 28, 2017 at 6:25 PM, Liu Bo <bo.li.liu@xxxxxxxxxx> wrote:
> > This case tests whether dio read can repair the bad copy if we have
> > a good copy.
> >
> > Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > introduced the regression.
> >
> > The upstream fix is
> > Btrfs: fix invalid dereference in btrfs_retry_endio
> >
> > Signed-off-by: Liu Bo <bo.li.liu@xxxxxxxxxx>
>
> Reviewed-by: Filipe Manana <fdmanana@xxxxxxxx>
>
> Just a comment below.
>
> > ---
> > v2: - Add regression commit and the fix to the description
> > - Use btrfs inspect-internal dump-tree to get rid of the dependence btrfs-map-logical
> > - Add comments in several places
> >
> > v3: - Add 'mkfs -b 1G' to limit filesystem size to 2G in raid1 profile so that
> > we get a consistent output.
> >
> > tests/btrfs/140 | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/btrfs/140.out | 39 ++++++++++++
> > tests/btrfs/group | 1 +
> > 3 files changed, 207 insertions(+)
> > create mode 100755 tests/btrfs/140
> > create mode 100644 tests/btrfs/140.out
> >
> > diff --git a/tests/btrfs/140 b/tests/btrfs/140
> > new file mode 100755
> > index 0000000..dcd8807
> > --- /dev/null
> > +++ b/tests/btrfs/140
> > @@ -0,0 +1,167 @@
> > +#! /bin/bash
> > +# FS QA Test 140
> > +#
> > +# Regression test for btrfs DIO read's repair during read.
> > +#
> > +# Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
> > +# introduced the regression.
> > +# The upstream fix is
> > +# Btrfs: fix invalid dereference in btrfs_retry_endio
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2017 Liu Bo. All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > +#-----------------------------------------------------------------------
> > +#
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "_cleanup; exit \$status" 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.*
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs btrfs
> > +_supported_os Linux
> > +_require_scratch_dev_pool 2
> > +
> > +_require_btrfs_command inspect-internal dump-tree
> > +_require_command "$FILEFRAG_PROG" filefrag
> > +_require_odirect
> > +
> > +# helpe to convert 'file offset' to btrfs logical offset
> > +FILEFRAG_FILTER='
> > + if (/blocks? of (\d+) bytes/) {
> > + $blocksize = $1;
> > + next
> > + }
> > + ($ext, $logical, $physical, $length) =
> > + (/^\s*(\d+):\s+(\d+)..\s+\d+:\s+(\d+)..\s+\d+:\s+(\d+):/)
> > + or next;
> > + ($flags) = /.*:\s*(\S*)$/;
> > + print $physical * $blocksize, "#",
> > + $length * $blocksize, "#",
> > + $logical * $blocksize, "#",
> > + $flags, " "'
> > +
> > +# this makes filefrag output script readable by using a perl helper.
> > +# output is one extent per line, with three numbers separated by '#'
> > +# the numbers are: physical, length, logical (all in bytes)
> > +# sample output: "1234#10#5678" -> physical 1234, length 10, logical 5678
> > +_filter_extents()
> > +{
> > + tee -a $seqres.full | $PERL_PROG -ne "$FILEFRAG_FILTER"
> > +}
> > +
> > +_check_file_extents()
> > +{
> > + cmd="filefrag -v $1"
> > + echo "# $cmd" >> $seqres.full
> > + out=`$cmd | _filter_extents`
> > + if [ -z "$out" ]; then
> > + return 1
> > + fi
> > + echo "after filter: $out" >> $seqres.full
> > + echo $out
> > + return 0
> > +}
> > +
> > +_check_repair()
> > +{
> > + filter=${1:-cat}
> > + dmesg | tac | sed -ne "0,\#run fstests $seqnum at $date_time#p" | tac | $filter | grep -q -e "csum failed"
> > + if [ $? -eq 0 ]; then
> > + echo 1
> > + else
> > + echo 0
> > + fi
> > +}
> > +
> > +_get_physical()
> > +{
> > + # $1 is logical address
> > + # print chunk tree and find devid 2 which is $SCRATCH_DEV
> > + $BTRFS_UTIL_PROG inspect-internal dump-tree -t 3 $SCRATCH_DEV | grep $1 -A 6 | awk '($1 ~ /stripe/ && $3 ~ /devid/ && $4 ~ /1/) { print $6 }'
> > +}
> > +
> > +_scratch_dev_pool_get 2
> > +# step 1, create a raid1 btrfs which contains one 128k file.
> > +echo "step 1......mkfs.btrfs" >>$seqres.full
> > +
> > +mkfs_opts="-d raid1 -b 1G"
> > +_scratch_pool_mkfs $mkfs_opts >>$seqres.full 2>&1
> > +
> > +# -o nospace_cache makes sure data is written to the start position of the data
> > +# chunk
> > +_scratch_mount -o nospace_cache
> > +
> > +$XFS_IO_PROG -f -d -c "pwrite -S 0xaa -b 128K 0 128K" "$SCRATCH_MNT/foobar" | _filter_xfs_io
> > +
> > +sync
>
> The sync is not necessary, since we cleanly unmount the fs below.
>
Oops, good catch.
> The test works now with a patched kernel and fails with an unpatched
> kernel as expected.
>
Thanks for trying it out.
> Looks good to me, but FILEFRAG_FILTER, _filter_extents,
> _check_file_extents, _get_physical and _check_repair are duplicated
> across all the 4 test case files in the series. Could be factored into
> common/btrfs later for example.
>
Sure, this piece of code is taken from the scrub testcase, so it'd be
a good candidate for common/btrfs.
Thanks,
-liubo
> > +
> > +# step 2, corrupt the first 64k of one copy (on SCRATCH_DEV which is the first
> > +# one in $SCRATCH_DEV_POOL
> > +echo "step 2......corrupt file extent" >>$seqres.full
> > +
> > +extents=`_check_file_extents $SCRATCH_MNT/foobar`
> > +logical_in_btrfs=`echo ${extents} | cut -d '#' -f 1`
> > +physical_on_scratch=`_get_physical ${logical_in_btrfs}`
> > +
> > +_scratch_unmount
> > +$XFS_IO_PROG -d -c "pwrite -S 0xbb -b 64K $physical_on_scratch 64K" $SCRATCH_DEV | _filter_xfs_io
> > +
> > +_scratch_mount
> > +
> > +# step 3, 128k dio read (this read can repair bad copy)
> > +echo "step 3......repair the bad copy" >>$seqres.full
> > +
> > +# since raid1 consists of two copies, and the following read may read the good
> > +# copy directly, so lets loop 10 times here and discard output that dio reads
> > +# give
> > +for i in `seq 1 10`; do
> > + $XFS_IO_PROG -d -c "pread -b 128K 0 128K" "$SCRATCH_MNT/foobar" > /dev/null
> > + repair=`_check_repair`
> > + if [ $repair -eq 1 ]; then
> > + break
> > + fi
> > +done
> > +
> > +_scratch_unmount
> > +
> > +# check if the repair works
> > +$XFS_IO_PROG -d -c "pread -v -b 512 $physical_on_scratch 512" $SCRATCH_DEV | _filter_xfs_io
> > +
> > +_scratch_dev_pool_put
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/btrfs/140.out b/tests/btrfs/140.out
> > new file mode 100644
> > index 0000000..c8565f5
> > --- /dev/null
> > +++ b/tests/btrfs/140.out
> > @@ -0,0 +1,39 @@
> > +QA output created by 140
> > +wrote 131072/131072 bytes at offset 0
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +wrote 65536/65536 bytes at offset 136708096
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +08260000: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260010: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260020: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260030: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260040: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260050: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260060: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260070: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260080: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260090: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082600a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082600b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082600c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082600d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082600e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082600f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260100: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260110: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260120: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260130: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260140: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260150: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260160: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260170: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260180: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +08260190: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082601a0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082601b0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082601c0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082601d0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082601e0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +082601f0: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................
> > +read 512/512 bytes at offset 136708096
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > diff --git a/tests/btrfs/group b/tests/btrfs/group
> > index 9d4b80b..1cb9c98 100644
> > --- a/tests/btrfs/group
> > +++ b/tests/btrfs/group
> > @@ -141,3 +141,4 @@
> > 137 auto quick send
> > 138 auto compress
> > 139 auto qgroup
> > +140 auto quick
> > --
> > 2.5.0
> >
>
>
>
> --
> Filipe David Manana,
>
> “Whether you think you can, or you think you can't — you're right.”
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
