On Fri, Feb 17, 2017 at 6:36 AM, Xiong Zhou <xzhou@xxxxxxxxxx> wrote:
> Lower dir comes from another overlayfs dir, then
> accessing files in it should work.
>
> CC: Miklos Szeredi <mszeredi@xxxxxxxxxx>
> Signed-off-by: Xiong Zhou <xzhou@xxxxxxxxxx>
> ---
> tests/overlay/029 | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/overlay/029.out | 5 +++
> tests/overlay/group | 1 +
> 3 files changed, 106 insertions(+)
> create mode 100755 tests/overlay/029
> create mode 100644 tests/overlay/029.out
>
> diff --git a/tests/overlay/029 b/tests/overlay/029
> new file mode 100755
> index 0000000..3909155
> --- /dev/null
> +++ b/tests/overlay/029
> @@ -0,0 +1,100 @@
> +#! /bin/bash
> +# FS QA Test 029
> +#
> +# There are dirs/files in lower dir and upper dir before
> +# mounting overlayfs. After mounting, use dir in overlayfs
> +# mountpoint as lowerdir to mount another overlayfs, then
> +# access old files through the second overlayfs. It was
> +# not working, kernel commit below fixed it.
> +#
> +# c4fcfc1619ea ovl: fix d_real() for stacked fs
> +#
> +# This reproducer was originally written by
> +# Miklos Szeredi <mszeredi@xxxxxxxxxx>
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2017 Red Hat Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + $UMOUNT_PROG $tmp/mnt
> + rm -rf $tmp/{upper,mnt,work}
rm -rf $tmp (which test has created)
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs overlay
> +_supported_os Linux
> +_require_scratch
> +
> +# Remove all files from previous tests
> +_scratch_mkfs
> +
> +# Preparing files
> +upperdir=$SCRATCH_DEV/$OVERLAY_UPPER_DIR
> +lowerdir=$SCRATCH_DEV/$OVERLAY_LOWER_DIR
> +mkdir -p $upperdir/up
> +echo foo > $upperdir/up/foo
> +mkdir -p $lowerdir/low
> +echo bar > $lowerdir/low/bar
> +
> +# mount overlay in SCRATCH_MNT
> +_scratch_mount
> +
> +mkdir -p $tmp/{upper,mnt,work}
> +# mount overlay again using upper dir from SCRATCH_MNT dir
> +_overlay_mount_dirs $SCRATCH_MNT/up $tmp/{upper,work} \
> + overlay $tmp/mnt
> +# accessing file in the second mount
> +cat $tmp/mnt/foo
> +$UMOUNT_PROG $tmp/mnt
> +
> +# mount overlay again using lower dir from SCRATCH_MNT dir
> +_overlay_mount_dirs $SCRATCH_MNT/low $tmp/{upper,work} \
> + overlay $tmp/mnt
> +cat $tmp/mnt/bar
> +$UMOUNT_PROG $tmp/mnt
> +
> +# mount overlay again using SCRATCH_MNT dir
> +_overlay_mount_dirs $SCRATCH_MNT/ $tmp/{upper,work} \
> + overlay $tmp/mnt
> +cat $tmp/mnt/up/foo
> +cat $tmp/mnt/low/bar
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/overlay/029.out b/tests/overlay/029.out
> new file mode 100644
> index 0000000..e7f192c
> --- /dev/null
> +++ b/tests/overlay/029.out
> @@ -0,0 +1,5 @@
> +QA output created by 029
> +foo
> +bar
> +foo
> +bar
> diff --git a/tests/overlay/group b/tests/overlay/group
> index cf058fc..7e72a30 100644
> --- a/tests/overlay/group
> +++ b/tests/overlay/group
> @@ -31,3 +31,4 @@
> 026 auto attr quick
> 027 auto quick perms
> 028 auto copyup quick
> +029 auto quick
> --
> 1.8.3.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
