Hi,
Thank you for the review.
Yup, I'll submit v2 with changes for the comments except log flush. ;)
Thanks,
On Thu, Nov 17, 2016 at 04:35:27PM +0800, Eryu Guan wrote:
> [cc'ed linux-xfs for inputs on a flush log issue]
>
> On Wed, Nov 16, 2016 at 07:27:53PM -0800, Jaegeuk Kim wrote:
> > This patch adds tests/generic/391 to test fsync and fdatasync with power-cuts.
> >
> > The rule to check is:
> > 1) fsync should guarantee all the inode metadata after power-cut,
> > 2) fdatasync should guarantee i_size and i_blocks at least after power-cut.
> >
> > Suggested-by: Chao Yu <yuchao0@xxxxxxxxxx>
> > Signed-off-by: Jaegeuk Kim <jaegeuk@xxxxxxxxxx>
> > ---
> > tests/generic/391 | 125 ++++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/generic/391.out | 11 +++++
> > tests/generic/group | 1 +
> > 3 files changed, 137 insertions(+)
> > create mode 100644 tests/generic/391
> > create mode 100644 tests/generic/391.out
> >
> > diff --git a/tests/generic/391 b/tests/generic/391
> > new file mode 100644
> > index 0000000..17c3fd3
> > --- /dev/null
> > +++ b/tests/generic/391
> > @@ -0,0 +1,125 @@
> > +#! /bin/bash
> > +# FS QA Test 391
> > +#
> > +# Test inode's metadata after fsync or fdatasync calls.
> > +# In the case of fsync, filesystem should recover all the inode metadata, while
> > +# recovering i_blocks and i_size at least for fdatasync.
> > +#
> > +#-----------------------------------------------------------------------
> > +# Copyright (c) 2016 Jaegeuk Kim. All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> > +#-----------------------------------------------------------------------
> > +#
> > +
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
>
> Better to follow the template and other tests on how to do cleanup, i.e.
> trap _cleanup on exit and do real cleanups in it. e.g.
>
> trap "_cleanup; exit \$status" 0 1 2 3 15
>
> _cleanup()
> {
> cd /
> rm -f $tmp.*
> }
>
> Not a big deal, but it's better to maintain consistency :)
>
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +. ./common/punch
> > +
> > +# real QA test starts here
> > +_supported_fs generic
> > +_supported_os Linux
> > +
> > +rm -f $seqres.full
> > +_require_scratch
> > +_require_scratch_shutdown
> > +_require_xfs_io_command "fpunch"
> > +
> > +_scratch_mkfs >/dev/null 2>&1
> > +_scratch_mount
> > +
> > +testfile=$SCRATCH_MNT/testfile
> > +
> > +# check inode metadata after shutdown
> > +_check_inode_metadata()
>
> No need to name local functions with the leading "_", that's for global
> helper functions.
>
> > +{
> > + src/godown $SCRATCH_MNT >> $seqres.full
> > + $XFS_IO_PROG -r -c "stat -v" $1 >$tmp.before
>
> Shouldn't we call godown *after* xfs_io -c stat? I saw EIO on this
> xfs_io command and all sub-tests reported stat diff.
>
> And perhaps we need to flush the log on godown for XFS? i.e.
>
> src/godown -f $SCRATCH_MNT >> $seqres.full
>
> Otherwise XFS fails all the "1024" & fsync tests (after I fixed the
> godown & xfs_io order locally), fdatasync tests are fine.
>
> @@ -1,8 +1,16 @@
> QA output created by 391
> ==== i_size 1024 test with fsync ====
> +6c6
> +< stat.blocks = 8200
> +---
> +> stat.blocks = 16256
> ==== i_size 4096 test with fsync ====
> ==== i_time test with fsync ====
> ==== fpunch 1024 test with fsync ====
> +6c6
> +< stat.blocks = 8208
> +---
> +> stat.blocks = 24576
> ==== fpunch 4096 test with fsync ====
>
> Not sure if this is the expected behavior on XFS. cc'ed xfs list for
> some inputs.
>
> > + _scratch_cycle_mount
> > + $XFS_IO_PROG -r -c "stat -v" $1 >$tmp.after
> > + diff $tmp.before $tmp.after >>$tmp.diff
>
> I think $tmp.diff should be overwritten on each sub-test.
>
> > +
> > + if [ "$2" = "fdatasync" ]; then
> > + cat $tmp.diff | grep stat.size
> > + cat $tmp.diff | grep stat.blocks
> > + else
> > + cat $tmp.diff
> > + fi
> > + cat $tmp.before >> $seqres.full
> > + cat $tmp.after >> $seqres.full
> > +}
> > +
> > +# append XX KB with f{data}sync, followed by power-cut
> > +_test_i_size()
> > +{
> > + echo "==== i_size $2 test with $1 ===="
>
> I find it's much easier to read the $seqres.full log if we append these
> kind of logs to $seqres.full too, e.g.
>
> echo "==== i_size $2 test with $1 ====" | tee -a $seqres.full
>
> Thanks,
> Eryu
>
> > + $XFS_IO_PROG -f -c "pwrite 0 4M" \
> > + -c "fsync" \
> > + -c "pwrite 4M $2" \
> > + -c "$1" \
> > + $testfile >/dev/null
> > + _check_inode_metadata $testfile $1
> > +}
> > +
> > +# update times with f{data}sync, followed by power-cut
> > +_test_i_time()
> > +{
> > + echo "==== i_time test with $1 ===="
> > + $XFS_IO_PROG -f -c "pwrite 0 4M" \
> > + -c "fsync" \
> > + $testfile >/dev/null
> > + sleep 1
> > + touch $testfile
> > + $XFS_IO_PROG -c "$1" \
> > + $testfile >/dev/null
> > + _check_inode_metadata $testfile $1
> > +}
> > +
> > +# punch XX KB with f{data}sync, followed by power-cut
> > +_test_punch()
> > +{
> > + echo "==== fpunch $2 test with $1 ===="
> > + $XFS_IO_PROG -f -c "pwrite 0 4202496" \
> > + -c "fsync" \
> > + -c "fpunch 4194304 $2"\
> > + -c "$1" \
> > + $testfile >/dev/null
> > +
> > + _check_inode_metadata $testfile $1
> > +}
> > +
> > +for i in fsync fdatasync
> > +do
> > + _test_i_size $i 1024
> > + _test_i_size $i 4096
> > + _test_i_time $i
> > + _test_punch $i 1024
> > + _test_punch $i 4096
> > +done
> > +
> > +rm -f $tmp.*
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/391.out b/tests/generic/391.out
> > new file mode 100644
> > index 0000000..7c66776
> > --- /dev/null
> > +++ b/tests/generic/391.out
> > @@ -0,0 +1,11 @@
> > +QA output created by 391
> > +==== i_size 1024 test with fsync ====
> > +==== i_size 4096 test with fsync ====
> > +==== i_time test with fsync ====
> > +==== fpunch 1024 test with fsync ====
> > +==== fpunch 4096 test with fsync ====
> > +==== i_size 1024 test with fdatasync ====
> > +==== i_size 4096 test with fdatasync ====
> > +==== i_time test with fdatasync ====
> > +==== fpunch 1024 test with fdatasync ====
> > +==== fpunch 4096 test with fdatasync ====
> > diff --git a/tests/generic/group b/tests/generic/group
> > index 08007d7..9de3415 100644
> > --- a/tests/generic/group
> > +++ b/tests/generic/group
> > @@ -392,3 +392,4 @@
> > 387 auto clone
> > 388 auto log metadata
> > 389 auto quick acl
> > +391 auto quick metadata
> > --
> > 2.8.3
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
