On Tue, Nov 15, 2016 at 02:53:12PM +0800, Eryu Guan wrote:
> On Fri, Nov 11, 2016 at 02:30:04PM -0800, Liu Bo wrote:
> > This updates generic/098 by adding a sync option, i.e. 'sync' after the second
> > write, and with btrfs's NO_HOLES, we could still get wrong isize after remount.
> >
> > This gets fixed by the patch
> >
> > 'Btrfs: fix truncate down when no_holes feature is enabled'
> >
> > Signed-off-by: Liu Bo <bo.li.liu@xxxxxxxxxx>
>
> Looks good to me, just some nitpicks inline :)
>
> > ---
> > tests/generic/098 | 57 ++++++++++++++++++++++++++++++++-------------------
> > tests/generic/098.out | 10 +++++++++
> > 2 files changed, 46 insertions(+), 21 deletions(-)
> >
> > diff --git a/tests/generic/098 b/tests/generic/098
> > index 838bb5d..3b89939 100755
> > --- a/tests/generic/098
> > +++ b/tests/generic/098
> > @@ -64,27 +64,42 @@ rm -f $seqres.full
> > _scratch_mkfs >>$seqres.full 2>&1
> > _scratch_mount
> >
> > -# Create our test file with some data and durably persist it.
> > -$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 128K" $SCRATCH_MNT/foo | _filter_xfs_io
> > -sync
> > -
> > -# Append some data to the file, increasing its size, and leave a hole between
> > -# the old size and the start offset if the following write. So our file gets
> > -# a hole in the range [128Kb, 256Kb[.
> > -$XFS_IO_PROG -c "pwrite -S 0xbb 256K 32K" $SCRATCH_MNT/foo | _filter_xfs_io
> > -
> > -# Now truncate our file to a smaller size that is in the middle of the hole we
> > -# previously created. On most truncate implementations the data we appended
> > -# before gets discarded from memory (with truncate_setsize()) and never ends
> > -# up being written to disk.
> > -$XFS_IO_PROG -c "truncate 160K" $SCRATCH_MNT/foo
> > -
> > -_scratch_cycle_mount
> > -
> > -# We expect to see a file with a size of 160Kb, with the first 128Kb of data all
> > -# having the value 0xaa and the remaining 32Kb of data all having the value 0x00
> > -echo "File content after remount:"
> > -od -t x1 $SCRATCH_MNT/foo
> > +workout()
> > +{
> > + NEED_SYNC=$1
>
> Use "local" to declare this var, and in lower case. Usually we use upper
> case for global variables.
OK.
>
> > +
> > + # Create our test file with some data and durably persist it.
> > + $XFS_IO_PROG -t -f -c "pwrite -S 0xaa 0 128K" $SCRATCH_MNT/foo | _filter_xfs_io
> > + sync
> > +
> > + # Append some data to the file, increasing its size, and leave a hole between
> > + # the old size and the start offset if the following write. So our file gets
> > + # a hole in the range [128Kb, 256Kb[.
> > + $XFS_IO_PROG -c "pwrite -S 0xbb 256K 32K" $SCRATCH_MNT/foo | _filter_xfs_io
> > +
> > + if [ $NEED_SYNC -eq 1 ]; then
> > + sync
> > + fi
>
> Good to see some comments to explain why we need this to test
> with/without sync case.
Sure, will fix in v2.
Thanks,
-liubo
>
> Thanks,
> Eryu
>
> > +
> > + # Now truncate our file to a smaller size that is in the middle of the hole we
> > + # previously created.
> > + # If we don't flush dirty page cache above, on most truncate
> > + # implementations the data we appended before gets discarded from
> > + # memory (with truncate_setsize()) and never ends up being written to
> > + # disk.
> > + $XFS_IO_PROG -c "truncate 160K" $SCRATCH_MNT/foo
> > +
> > + _scratch_cycle_mount
> > +
> > + # We expect to see a file with a size of 160Kb, with the first 128Kb of data all
> > + # having the value 0xaa and the remaining 32Kb of data all having the value 0x00
> > + echo "File content after remount:"
> > + od -t x1 $SCRATCH_MNT/foo
> > +}
> > +
> > +workout 0
> > +# flush after each write
> > +workout 1
> >
> > status=0
> > exit
> > diff --git a/tests/generic/098.out b/tests/generic/098.out
> > index 37415ee..f87f046 100644
> > --- a/tests/generic/098.out
> > +++ b/tests/generic/098.out
> > @@ -9,3 +9,13 @@ File content after remount:
> > 0400000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > *
> > 0500000
> > +wrote 131072/131072 bytes at offset 0
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +wrote 32768/32768 bytes at offset 262144
> > +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> > +File content after remount:
> > +0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa
> > +*
> > +0400000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> > +*
> > +0500000
> > --
> > 2.5.0
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
