The value of "$XFS_IO_PROG" may contain extra flags after the
binary path (e.g. -F), so it is wrong to use the variable inside
quotes in xfs_io execution call sites.
This bug surfaced while testing the new xfs_io -M flag.
Signed-off-by: Amir Goldstein <amir73il@xxxxxxxxx>
---
common/rc | 6 +++---
common/reflink | 26 +++++++++++++-------------
tests/generic/176 | 2 +-
tests/xfs/328 | 2 +-
4 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/common/rc b/common/rc
index 565ba67..a838750 100644
--- a/common/rc
+++ b/common/rc
@@ -90,7 +90,7 @@ _pwrite_byte() {
file="$4"
xfs_io_args="$5"
- "$XFS_IO_PROG" $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
+ $XFS_IO_PROG $xfs_io_args -f -c "pwrite -S $pattern $offset $len" "$file"
}
# mmap-write a byte into a range of a file
@@ -101,7 +101,7 @@ _mwrite_byte() {
mmap_len="$4"
file="$5"
- "$XFS_IO_PROG" -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
+ $XFS_IO_PROG -f -c "mmap -rw 0 $mmap_len" -c "mwrite -S $pattern $offset $len" "$file"
}
# ls -l w/ selinux sometimes puts a dot at the end:
@@ -3437,7 +3437,7 @@ _xfs_bmapx_find() {
file="$1"
shift
- "$XFS_IO_PROG" -c "bmap -${param}lpv" "$file" | grep -c "$@"
+ $XFS_IO_PROG -c "bmap -${param}lpv" "$file" | grep -c "$@"
}
_require_chattr()
diff --git a/common/reflink b/common/reflink
index 1363971..8b34046 100644
--- a/common/reflink
+++ b/common/reflink
@@ -52,8 +52,8 @@ _require_test_reflink()
_require_xfs_io_command "reflink"
rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
- "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
- "$XFS_IO_PROG" -f -c "reflink $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" > /dev/null
+ $XFS_IO_PROG -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ $XFS_IO_PROG -f -c "reflink $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" > /dev/null
if [ ! -s "$TEST_DIR/file2" ]; then
rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
_notrun "Reflink not supported by test filesystem type: $FSTYP"
@@ -69,8 +69,8 @@ _require_scratch_reflink()
_scratch_mkfs > /dev/null
_scratch_mount
- "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
- "$XFS_IO_PROG" -f -c "reflink $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ $XFS_IO_PROG -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ $XFS_IO_PROG -f -c "reflink $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" > /dev/null
if [ ! -s "$SCRATCH_MNT/file2" ]; then
_scratch_unmount
_notrun "Reflink not supported by scratch filesystem type: $FSTYP"
@@ -85,9 +85,9 @@ _require_test_dedupe()
_require_xfs_io_command "dedupe"
rm -rf "$TEST_DIR/file1" "$TEST_DIR/file2"
- "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
- "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file2" > /dev/null
- testio="$("$XFS_IO_PROG" -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
+ $XFS_IO_PROG -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file1" > /dev/null
+ $XFS_IO_PROG -f -c "pwrite -S 0x61 0 65536" "$TEST_DIR/file2" > /dev/null
+ testio="$($XFS_IO_PROG -f -c "dedupe $TEST_DIR/file1 0 0 65536" "$TEST_DIR/file2" 2>&1)"
echo $testio | grep -q "Operation not supported" && \
_notrun "Dedupe not supported by test filesystem type: $FSTYP"
echo $testio | grep -q "Inappropriate ioctl for device" && \
@@ -105,9 +105,9 @@ _require_scratch_dedupe()
_scratch_mkfs > /dev/null
_scratch_mount
- "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
- "$XFS_IO_PROG" -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file2" > /dev/null
- testio="$("$XFS_IO_PROG" -f -c "dedupe $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" 2>&1)"
+ $XFS_IO_PROG -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file1" > /dev/null
+ $XFS_IO_PROG -f -c "pwrite -S 0x61 0 65536" "$SCRATCH_MNT/file2" > /dev/null
+ testio="$($XFS_IO_PROG -f -c "dedupe $SCRATCH_MNT/file1 0 0 65536" "$SCRATCH_MNT/file2" 2>&1)"
echo $testio | grep -q "Operation not supported" && \
_notrun "Dedupe not supported by test filesystem type: $FSTYP"
echo $testio | grep -q "Inappropriate ioctl for device" && \
@@ -161,7 +161,7 @@ _reflink() {
file1="$1"
file2="$2"
- "$XFS_IO_PROG" -f -c "reflink $file1" "$file2"
+ $XFS_IO_PROG -f -c "reflink $file1" "$file2"
}
# Reflink some part of file1 into another part of file2
@@ -173,7 +173,7 @@ _reflink_range() {
len="$5"
xfs_io_args="$6"
- "$XFS_IO_PROG" $xfs_io_args -f -c "reflink $file1 $offset1 $offset2 $len" "$file2"
+ $XFS_IO_PROG $xfs_io_args -f -c "reflink $file1 $offset1 $offset2 $len" "$file2"
}
# Dedupe some part of file1 into another part of file2
@@ -185,7 +185,7 @@ _dedupe_range() {
len="$5"
xfs_io_args="$6"
- "$XFS_IO_PROG" $xfs_io_args -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
+ $XFS_IO_PROG $xfs_io_args -f -c "dedupe $file1 $offset1 $offset2 $len" "$file2"
}
# Create a file of interleaved unwritten and reflinked blocks
diff --git a/tests/generic/176 b/tests/generic/176
index b14255b..76e923a 100755
--- a/tests/generic/176
+++ b/tests/generic/176
@@ -75,7 +75,7 @@ test $fnr -lt 17 && _notrun "Insufficient space for stress test; would only crea
echo "Create a many-block file"
echo "creating $blocks_needed blocks..." >> "$seqres.full"
-"$XFS_IO_PROG" -f -c "pwrite -S 0x61 -b 4194304 0 $((2 ** (fnr + 1) * blksz))" "$testdir/file1" >> "$seqres.full"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 -b 4194304 0 $((2 ** (fnr + 1) * blksz))" "$testdir/file1" >> "$seqres.full"
echo "punching..." >> "$seqres.full"
"$here/src/punch-alternating" "$testdir/file1" >> "$seqres.full"
echo "...done" >> "$seqres.full"
diff --git a/tests/xfs/328 b/tests/xfs/328
index 33a0bef..8518456 100755
--- a/tests/xfs/328
+++ b/tests/xfs/328
@@ -80,7 +80,7 @@ bytes=$((blocks_needed * blksz))
echo "Create a many-block file"
echo "creating $blocks_needed blocks..." >> "$seqres.full"
_pwrite_byte 0x62 0 $blksz $testdir/file0 >> $seqres.full
-"$XFS_IO_PROG" -f -c "pwrite -S 0x61 -b 4194304 0 $bytes" "$testdir/file1" >> "$seqres.full"
+$XFS_IO_PROG -f -c "pwrite -S 0x61 -b 4194304 0 $bytes" "$testdir/file1" >> "$seqres.full"
echo "punching..." >> "$seqres.full"
"$here/src/punch-alternating" "$testdir/file1" >> "$seqres.full"
seq 0 2 $((2 ** (fnr + 1) )) | while read lblk; do
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
