Hi,
On 09/12/2016 05:18 PM, Eryu Guan wrote:
On Mon, Sep 12, 2016 at 02:36:59PM +0800, Wang Xiaoguang wrote:
Signed-off-by: Wang Xiaoguang <wangxg.fnst@xxxxxxxxxxxxxx>
It's better to describe the test a bit in the commit log, e.g. why this
test is needed etc., which at least could give us some historical
information when we look at this case again some time later. I guess
there's a btrfs bug that truncate would fail due to ENOSPC.
OK.
---
tests/generic/377 | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/377.out | 2 ++
tests/generic/group | 1 +
3 files changed, 77 insertions(+)
create mode 100755 tests/generic/377
create mode 100644 tests/generic/377.out
diff --git a/tests/generic/377 b/tests/generic/377
new file mode 100755
index 0000000..3a0c27e
--- /dev/null
+++ b/tests/generic/377
@@ -0,0 +1,74 @@
+#! /bin/bash
+# FS QA Test 377
+#
+# Create a heavily reflinked file, then check whether we can truncate
+# it correctly.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Fujitsu. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/reflink
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# Modify as appropriate.
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_scratch_reflink
+_require_cp_reflink
cp is not used, so this "require" is not needed.
+
+_scratch_mkfs_sized $((128 * 1024 * 1024)) >> $seqres.full 2>&1
+_scratch_mount
+
+file=$SCRATCH_MNT/testfile
+blocksize=$((128 * 1024))
+
+# create the initial file.
+_pwrite_byte 0xcdcdcdcd 0 $blocksize $file > /dev/null
+
+echo "Silence is golden"
+# filesize is 20GB, and here 20GB is choosen deliberately, so it
+# can consume enough fs free space.
+for ((i=1; i<163840; i++)); do
+ _reflink_range $file 0 $file $(($i * $blocksize)) $blocksize \
+ >> $seqres.full 2>&1
+done
+$XFS_IO_PROG -f -c 'truncate 0' $file
This took me more than 10 minutes to finish on my test vm (4vcpu and 8G
memory), 980s for XFS and 700s for btrfs(truncate failed due to ENOSPC).
That's too long for an 'auto' test.
Can the runtime be reduced? I'm not sure how long time it took for you,
but it would be good to have it finish around 5 minutes.
OK, I'll try to reduce the test time.
It took me about 2 minutes. For you, I think it's "btrfsck device" which
run so long time, for heavily reflinked file, btrfsck does not perform well.
Regards,
Xiaoguang Wang
Thanks,
Eryu
+
+status=0
+exit
diff --git a/tests/generic/377.out b/tests/generic/377.out
new file mode 100644
index 0000000..d14a512
--- /dev/null
+++ b/tests/generic/377.out
@@ -0,0 +1,2 @@
+QA output created by 377
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index bad71bc..ea98752 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -379,3 +379,4 @@
374 auto quick clone dedupe
375 auto quick acl
376 auto quick metadata
+377 auto clone
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
