On Mon, Jun 27, 2016 at 04:14:13PM -0400, jeffm@xxxxxxxx wrote:
> From: Jeff Mahoney <jeffm@xxxxxxxx>
>
> This tests the sysfs publishing for btrfs allocation and device
> membership info under a number of different layouts, similar to the
> btrfs replace test. We test the allocation files only for existence and
> that they contain numerical values. We test the device membership
> by mapping the devices used to create the file system to sysfs paths
> and matching them against the paths used for the device membership
> symlinks.
>
> Signed-off-by: Jeff Mahoney <jeffm@xxxxxxxx>
> ---
> common/btrfs | 7 +++
> common/config | 7 ++-
> tests/btrfs/125 | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/125.out | 1 +
> tests/btrfs/group | 1 +
> 5 files changed, 190 insertions(+), 3 deletions(-)
> create mode 100755 tests/btrfs/125
> create mode 100644 tests/btrfs/125.out
>
> diff --git a/common/btrfs b/common/btrfs
> index b972b13..5828d0a 100644
> --- a/common/btrfs
> +++ b/common/btrfs
> @@ -41,3 +41,10 @@ _require_btrfs_ioctl()
> _notrun "btrfs ioctl $ioctl not implemented."
> fi
> }
> +
> +# Requires the minimum size pool for largest btrfs RAID test
> +_require_btrfs_raid_dev_pool()
> +{
> + _require_scratch_dev_pool 4 # RAID10
> + _require_scratch_dev_pool_equal_size
> +}
I don't think this helper is needed, calling the two _requires in the
test directly is good enough and clear.
> diff --git a/common/config b/common/config
> index c25b1ec..8577924 100644
> --- a/common/config
> +++ b/common/config
> @@ -201,13 +201,14 @@ export DEBUGFS_PROG="`set_prog_path debugfs`"
> # newer systems have udevadm command but older systems like RHEL5 don't.
> # But if neither one is available, just set it to "sleep 1" to wait for lv to
> # be settled
> -UDEV_SETTLE_PROG="`set_prog_path udevadm`"
> -if [ "$UDEV_SETTLE_PROG" == "" ]; then
> +UDEVADM_PROG="`set_prog_path udevadm`"
> +if [ "$UDEVADM_PROG" == "" ]; then
> # try udevsettle command
> UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
> else
> # udevadm is available, add 'settle' as subcommand
> - UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
> + UDEV_SETTLE_PROG="$UDEVADM_PROG settle"
> + export UDEVADM_PROG
UDEVADM_PROG should be exported no matter it's empty or not.
> fi
> # neither command is available, use sleep 1
> if [ "$UDEV_SETTLE_PROG" == "" ]; then
> diff --git a/tests/btrfs/125 b/tests/btrfs/125
> new file mode 100755
> index 0000000..999a10e
> --- /dev/null
> +++ b/tests/btrfs/125
> @@ -0,0 +1,177 @@
> +#! /bin/bash
> +# FS QA Test No. 125
> +#
> +# Test of the btrfs sysfs publishing
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (C) 2016 SUSE. All rights reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1
> +
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.*
> +}
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/btrfs
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_command "$UDEVADM_PROG" udevadm
> +_require_test
> +_require_btrfs_sysfs
> +_require_btrfs_raid_dev_pool
> +
> +sysfs_root=$(_btrfs_get_sysfs $TEST_DIR)
> +
> +[ -d "$sysfs_root/allocation" ] || _notrun "sysfs allocation dir not found"
> +[ -d "$sysfs_root/devices" ] || _notrun "sysfs devices dir not found"
With _require_btrfs_sysfs updated, we can just call
_require_btrfs_sysfs allocation
_require_btrfs_sysfs devices
> +
> +check_file()
> +{
> + local file=$1
> + base="$(basename $(dirname $file))/$(basename $file)"
> + value="$(cat $file)"
> + if [ -n "$(echo $value | tr -d 0-9)" ]; then
> + echo "ERROR: $base: numerical value expected" \
> + "(got $value)"
> + fi
> +}
> +
> +check_chunk()
> +{
> + path=$1
> + mkfs_options=$2
> +
> + chunktype=$(basename $path)
> + [ -d "$path" ] || echo "No $chunktype directory."
> +
> + for file in bytes_may_use bytes_pinned bytes_reserved bytes_used \
> + disk_total disk_used flags total_bytes \
> + total_bytes_pinned; do
> + check_file "$path/$file"
> + done
> +
> + if [ "$chunktype" = "data" -o "$chunktype" = "mixed" ]; then
> + opt="-d"
> + elif [ "$chunktype" = "metadata" -o "$chunktype" = "system" ]; then
> + opt="-m"
> + fi
> +
> + profile=$(echo $mkfs_options | sed -e "s/.*$opt \([[:alnum:]]*\).*/\1/")
> + [ -d "$path/$profile" ] || echo "No $profile dir for $chunktype"
> +
> + for file in total_bytes used_bytes; do
> + check_file $path/$profile/$file
> + done
> +}
> +
> +check_dev_link()
> +{
> + local dev=$1
> + DEV="/sys/$($UDEVADM_PROG info --query=path $dev)"
> + DEV="$(readlink -f $DEV)"
lowercase local names
> + found=false
> + for link in $sysfs_base/devices/*; do
> + LINK="$(readlink -f $link)"
> + if [ "$LINK" = "$DEV" ]; then
> + found=true
> + break
> + fi
> + done
> + if ! $found; then
> + echo "Symlink for $dev missing in $sysfs_base/devices"
> + fi
> + return 0
> +}
> +
> +workout()
> +{
> + local mkfs_options="$1"
> + local num_devs4raid="$2"
> + local fssize
> + local used_devs=""
> +
> + if [ "$num_devs4raid" -gt 1 ]; then
> + used_devs=$(echo $SCRATCH_DEV_POOL|tr '\t' ' '| \
> + cut -d ' ' -f 2-$num_devs4raid)
> + fi
> +
> + # We check the error code since mkfs can fail if the devices
> + # are specified incorrectly but we may still have a file system
> + # from a prior run.
> + _scratch_mkfs $mkfs_options $used_devs 2>> $seqres.full || \
> + _fail "mkfs failed"
Ah, I got it wrong about _scratch_mkfs previously, SCRATCH_DEV was cut
off from $used_devs, so _scratch_mkfs works here. It's not obvious,
would be better to have some comments here.
Thanks,
Eryu
> +
> + _scratch_mount
> +
> + # Check allocation
> + sysfs_base="$(_btrfs_get_sysfs $SCRATCH_MNT)"
> +
> + mixed=false
> + case "$mkfs_options" in
> + *-M*)
> + mixed=true;
> + ;;
> + esac
> +
> + check_chunk "$sysfs_base/allocation/system" "$mkfs_options"
> + if $mixed; then
> + check_chunk "$sysfs_base/allocation/mixed" "$mkfs_options"
> + else
> + check_chunk "$sysfs_base/allocation/data" "$mkfs_options"
> + check_chunk "$sysfs_base/allocation/metadata" "$mkfs_options"
> + fi
> +
> + for dev in $used_devs; do
> + check_dev_link $dev
> + done
> +
> + _scratch_unmount
> +}
> +
> +workout "-m single -d single" 1
> +workout "-m single -d single -M" 1
> +workout "-m dup -d single" 1
> +workout "-m dup -d dup -M" 1
> +workout "-m raid0 -d raid0" 2
> +workout "-m raid1 -d raid1" 2
> +workout "-m raid5 -d raid5" 2
> +workout "-m raid6 -d raid6" 3
> +workout "-m raid10 -d raid10" 4
> +
> +status=0
> +exit
> diff --git a/tests/btrfs/125.out b/tests/btrfs/125.out
> new file mode 100644
> index 0000000..4f22ab0
> --- /dev/null
> +++ b/tests/btrfs/125.out
> @@ -0,0 +1 @@
> +QA output created by 125
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 8b5050e..3535f02 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -127,3 +127,4 @@
> 122 auto quick snapshot qgroup
> 123 auto quick qgroup
> 124 auto quick metadata
> +125 auto quick metadata
> --
> 1.8.5.6
>
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
