[PATCH] xfs/106: rewrite this case for it can be used again

[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]



xfs/106 try to do some basic xfs_quota functionality test, but due to
it's too old, there're 3 problems:
1. Some quota commands can't be used, but this case try to use it.
   e.g. "warn" command.
2. Some quota commands can be used now, but this case doesn't test them,
   because they can't work previously. e.g. "disable, enable, off
   and remove" comands
3. Some expected output in 106.out file become incorrect now.

I rewrite this case for above 3 reasons.

Signed-off-by: Zorro Lang <zlang@xxxxxxxxxx>
---

Hi,

This case always run failed, so I try to rewrite it. I removed $FSSTRESS_PROG
test, because it make the output too unpredictable, and I think it's not
so important for this test(If I'm wrong, please tell me, I will try to bring
it back).

I removed "warn" command test, because this feature is not currently
implemented.

I added more other commands basic test.

Due to xfs/299 has done "past the hard block/inode limit" test, when quota
enforced or no enforced. So I doesn't test it in this case.

One more problem, looks like the dump command can't dump timer. I set timer
to 3 days. Then after dump and restore, the grace time become to 7 days. Is
it expected?

Thanks
Zorro

 tests/xfs/106     | 311 ++++++++++++++++--------------
 tests/xfs/106.out | 552 +++++++++++++++++++++---------------------------------
 2 files changed, 377 insertions(+), 486 deletions(-)

diff --git a/tests/xfs/106 b/tests/xfs/106
index 74658a6..c693f2e 100755
--- a/tests/xfs/106
+++ b/tests/xfs/106
@@ -31,208 +31,231 @@ echo "QA output created by $seq"
 here=`pwd`
 tmp=/tmp/$$
 status=1	# failure is the default!
-trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+    cd /
+    rm -f $tmp.*
+}
 
 # get standard environment, filters and checks
 . ./common/rc
 . ./common/filter
 . ./common/quota
 
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
 _supported_fs xfs
-_supported_os Linux #IRIX
+_supported_os Linux
 _require_scratch
 _require_xfs_quota
+_require_user
+_require_group
 
-# real QA test starts here
-_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
-cat $tmp.mkfs >$seqres.full
-. $tmp.mkfs
+_scratch_mkfs_xfs >$seqres.full 2>&1
 
-# setup a default run
-if [ -z "$MOUNT_OPTIONS" ]; then
-	export MOUNT_OPTIONS="-o pquota,sync"
-else
-	export MOUNT_OPTIONS="$MOUNT_OPTIONS -o sync"
-fi
+uqid=`id -u fsgqa`
+gqid=`id -g fsgqa`
+pqid=10
+cat >$tmp.projects <<EOF
+$pqid:$SCRATCH_MNT
+EOF
 
-_qmount
-_require_prjquota $SCRATCH_DEV
+cat >$tmp.projid <<EOF
+root:0
+fsgqa:$pqid
+EOF
 
-# initial populate
-target=$SCRATCH_MNT/target
-$FSSTRESS_PROG -z -s 57069 -m 8 -n 1000 -p 4 \
--f allocsp=1 \
--f chown=3 \
--f creat=4 \
--f dwrite=4 \
--f fallocate=1 \
--f fdatasync=1 \
--f fiemap=1 \
--f freesp=1 \
--f fsync=1 \
--f link=1 \
--f mkdir=2 \
--f mknod=2 \
--f punch=1 \
--f rename=2 \
--f resvsp=1 \
--f rmdir=1 \
--f setxattr=1 \
--f symlink=2 \
--f sync=1 \
--f truncate=2 \
--f unlink=1 \
--f unresvsp=1 \
--f write=4 \
--d $target
-
-$FSSTRESS_PROG -z -s 57069 -m 8 -n 1000 -p 4 \
--f chown=500 \
--f setxattr=500 \
--d $target
-
-# also use space, to be able to go over/under limits easily
-uid=255
-gid=254
-prid=253
-rm -f $SCRATCH_MNT/resv
-$XFS_IO_PROG -fc "resvsp 0 200m" -c "chproj $prid" $SCRATCH_MNT/resv
-chown $uid $SCRATCH_MNT/resv
-chgrp $gid $SCRATCH_MNT/resv
+create_files()
+{
+    local bs=$1
+    local inum=$2
 
-_qmount
+    echo "Using type=$type id=$id" >> $seqres.full
+
+    for ((i=0; i<$((inum-1)); i++))
+    do
+	_file_as_id $SCRATCH_MNT/inode$i $id $type 1024 0
+    done
+
+    _file_as_id $SCRATCH_MNT/block $id $type $bs 1
+}
+
+clean_files()
+{
+    rm -rf $SCRATCH_MNT/*
+}
+
+filter_quot()
+{
+    _filter_quota | grep -vw root
+}
+
+filter_report()
+{
+    _filter_quota | grep -vw root
+}
 
-filter_xfs_quota()
+filter_state()
 {
-	perl -ne "
-s,$SCRATCH_MNT,[SCR_MNT],;
-s,$SCRATCH_DEV,[SCR_DEV],;
-s/Inode: \#\d+ \(0 blocks, 0 extents\)/Inode: #[INO] (0 blocks, 0 extents)/;
-s/Inode: \#\d+ \(\d+ blocks, \d+ extents\)/Inode: #[INO] (X blocks, Y extents)/;
-	print;"
+    _filter_quota | sed \
+	-e "s/Inode: #[0-9]* (0 blocks, 0 extents)/Inode: #[INO] (0 blocks, 0 extents)/g" \
+	-e "s/Inode: #[1-9]* ([1-9]* blocks, [0-9]* extents)/Inode: #[INO] (X blocks, Y extents)/g"
 }
 
 test_quot()
 {
-	echo "checking quot command (type=$type)"  # not deterministic on blks
-	xfs_quota -x -c "quot -n -$type" $SCRATCH_MNT >>$seqres.full 2>&1
+    echo "checking quot command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "quot -$type -bi" $SCRATCH_MNT | filter_quot
 }
 
 test_report()
 {
-	echo "checking report command (type=$type)"
-	xfs_quota -x -c "report -h -$type -U 256" $SCRATCH_MNT
+    echo "checking report command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "report -$type -biN" $SCRATCH_MNT | filter_report
 }
 
-test_limit1()
+test_limit()
 {
-	echo "checking limit command, pass 1 (type=$type)"
-	xfs_quota -x -c "limit -$type bsoft=100m bhard=100m ihard=2 $id" \
-		$SCRATCH_MNT
-	xfs_quota -x -c "limit -$type isoft=1 rtbsoft=100m rtbhard=110m $id"\
-		$SCRATCH_MNT
-	sleep 2		# let the timer day transition happen
-	xfs_quota -x -c "quota -$type -b -hnv $id" $SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -i -hnv $id" $SCRATCH_MNT
-	#xfs_quota -x -c "quota -$type -r -hnv $id" $SCRATCH_MNT
+    local bs=$1
+    local bh=$2
+    local is=$3
+    local ih=$4
+
+    echo "checking limit command (type=$type, bsoft=$bs, bhard=$bh, isoft=$is, ihard=$ih)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "limit -$type bsoft=$bs bhard=$bh fsgqa" \
+	-c "limit -$type isoft=$is ihard=$ih fsgqa" \
+	$SCRATCH_MNT
+
+    # let the timer day transition happen
+    sleep 2
 }
 
-test_limit2()
+test_quota()
 {
-	# push limits up high, so that timers are cleared, etc. (for later)
-	echo "checking limit command, pass2 (type=$type)"
-	xfs_quota -x -c "limit -$type bsoft=300m bhard=400m ihard=8800 $id" \
-		$SCRATCH_MNT
-	xfs_quota -x -c "limit -$type isoft=8000 rtbsoft=310m rtbhard=410m $id"\
-		$SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -b -hnv $id" $SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -i -hnv $id" $SCRATCH_MNT
-	#xfs_quota -x -c "quota -$type -r -hnv $id" $SCRATCH_MNT
+    echo "checking quota command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "quota -$type -bivN $id" $SCRATCH_MNT | filter_quot
 }
 
-test_warn()
+test_timer()
 {
-	echo "checking warn command (type=$type)"
-	xfs_quota -x -c "warn -$type -b 4 $id" $SCRATCH_MNT
-	xfs_quota -x -c "warn -$type -i 3 $id" $SCRATCH_MNT
-	#xfs_quota -x -c "warn -$type -r 2 $id" $SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -b -hnv $id" $SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -i -hnv $id" $SCRATCH_MNT
-	#xfs_quota -x -c "quota -$type -r -hnv $id" $SCRATCH_MNT
+    local t=$1
+
+    echo "checking timer command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "timer -$type -bi $t" $SCRATCH_MNT | _filter_scratch
 }
 
-test_timer()
+test_disable()
 {
-	echo "checking timer command (type=$type)"
-	xfs_quota -x -c "timer -$type -b 3days" $SCRATCH_MNT
-	xfs_quota -x -c "timer -$type -i 2days" $SCRATCH_MNT
-	#xfs_quota -x -c "timer -$type -r 1day" $SCRATCH_MNT
+    echo "checking disable command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "disable -$type -v" $SCRATCH_MNT | filter_state
 }
 
-test_state()
+test_enable()
+{
+    echo "checking enable command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "enable -$type -v" $SCRATCH_MNT | filter_state
+}
+
+test_off()
+{
+    echo "checking off command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "off -$type -v" $SCRATCH_MNT | _filter_scratch
+}
+
+test_remove()
 {
-	echo "checking state command (type=$type)"
-	xfs_quota -x -c "state -$type" $SCRATCH_MNT
-	# not yet working properly?
-	#echo "checking disable command (type=$type)"
-	#xfs_quota -x -c "disable -$type -v" $SCRATCH_MNT
-	#echo "checking enable command (type=$type)"
-	#xfs_quota -x -c "enable -$type -v" $SCRATCH_MNT
-	#echo "checking off command (type=$type)"
-	#xfs_quota -x -c "off -$type -v" $SCRATCH_MNT
-	#echo "checking remove command (type=$type)"
-	#xfs_quota -x -c "remove -$type -v" $SCRATCH_MNT
+    echo "checking remove command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "remove -$type -v" $SCRATCH_MNT | _filter_scratch
 }
 
-test_backup()
+test_state()
 {
-	echo "checking dump command (type=$type)"
-	rm -f $tmp.backup
-	xfs_quota -x -c "dump -$type -f $tmp.backup -U 256" $SCRATCH_MNT
-	cat $tmp.backup
+    echo "checking state command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "state -$type" $SCRATCH_MNT | filter_state
+}
 
-	echo "changing limits (type=$type)"
-	xfs_quota -x -c "limit -$type isoft=1000 ihard=1100 $id" $SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -i -hnv $id" $SCRATCH_MNT
+test_dump()
+{
+    echo "checking dump command (type=$type)"
+    rm -f $tmp.backup 2>>/dev/null
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "dump -$type -f $tmp.backup" $SCRATCH_MNT | _filter_scratch
+}
 
-	echo "checking restore command (type=$type)"
-	xfs_quota -x -c "restore -$type -f $tmp.backup" $SCRATCH_MNT
-	xfs_quota -x -c "quota -$type -i -hnv $id" $SCRATCH_MNT
-	rm -f $tmp.backup
+test_restore()
+{
+    echo "checking restore command (type=$type)"
+    $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+	-c "restore -$type -f $tmp.backup" $SCRATCH_MNT | _filter_scratch
 }
 
 test_xfs_quota()
 {
-	test_quot	; echo
-	test_report	; echo
-	test_timer	; echo
-	test_limit1	; echo
-	test_warn	; echo
-	test_limit2	; echo
-	test_backup	; echo
-	test_state	; echo
-	echo		; echo
+    echo "create_files 1024k 15"; create_files 1024k 15
+    echo "quota remount"; _qmount
+    echo ; test_quot
+    echo ; test_timer 3days
+    echo ; test_limit 512k 2048k 10 20
+    echo ; test_quota
+    echo ; test_dump
+
+    echo ; test_disable
+    echo ; test_report
+    echo "expect a remove error at here"; test_remove
+    echo ; test_enable
+    echo ; test_report
+
+    echo ; test_limit 100m 100m 100 100
+    echo ; test_quota
+    echo ; test_off
+    echo ; test_state
+    echo ; test_remove
+    echo ; test_report
+
+    echo "quota remount"; _qmount
+    echo ; test_report
+    echo ; test_restore
+    echo ; test_report
+    echo ; test_state
+    echo "cleanup files"; clean_files
 }
 
-# real QA test starts here
-export MOUNT_OPTIONS="-ouquota,sync"
+echo "----------------------- uquota,sync ---------------------------"
+_qmount_option "uquota,sync"
 _qmount
 type=u
-id=$uid
-test_xfs_quota | filter_xfs_quota
+id=$uqid
+test_xfs_quota
 
-export MOUNT_OPTIONS="-ogquota,sync"
+echo "----------------------- gquota,sync ---------------------------"
+_qmount_option "gquota,sync"
 _qmount
 type=g
-id=$gid
-test_xfs_quota | filter_xfs_quota
+id=$gqid
+test_xfs_quota
 
-export MOUNT_OPTIONS="-opquota,sync"
+echo "----------------------- pquota,sync ---------------------------"
+_qmount_option "pquota,sync"
 _qmount
 type=p
-id=$prid
-test_xfs_quota | filter_xfs_quota
+id=$pqid
+_require_prjquota $SCRATCH_DEV
+test_xfs_quota
 
-_scratch_unmount
+# success, all done
 status=0
 exit
diff --git a/tests/xfs/106.out b/tests/xfs/106.out
index 1096acb..a26af98 100644
--- a/tests/xfs/106.out
+++ b/tests/xfs/106.out
@@ -1,379 +1,247 @@
 QA output created by 106
-meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
-data     = bsize=XXX blocks=XXX, imaxpct=PCT
-         = sunit=XXX swidth=XXX, unwritten=X
-naming   =VERN bsize=XXX
-log      =LDEV bsize=XXX blocks=XXX
-realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+----------------------- uquota,sync ---------------------------
+create_files 1024k 15
+quota remount
+
 checking quot command (type=u)
+SCRATCH_DEV (SCRATCH_MNT) User:
+ 1024 15 fsgqa 
+
+checking timer command (type=u)
+
+checking limit command (type=u, bsoft=512k, bhard=2048k, isoft=10, ihard=20)
+
+checking quota command (type=u)
+SCRATCH_DEV 1024 512 2048 00 [3 days] 15 10 20 00 [3 days] SCRATCH_MNT
+
+checking dump command (type=u)
+
+checking disable command (type=u)
+User quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: OFF
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [3 days 00:00:30]
+Inodes grace time: [3 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
 
 checking report command (type=u)
-User quota on [SCR_MNT] ([SCR_DEV])
-                        Blocks              
-User ID      Used   Soft   Hard Warn/Grace   
----------- --------------------------------- 
-#0          84.4M      0      0  00 [------]
-#1           5.5M      0      0  00 [------]
-#2           1.2M      0      0  00 [------]
-#3           1.2M      0      0  00 [------]
-#4           2.3M      0      0  00 [------]
-#5          1004K      0      0  00 [------]
-#6           2.1M      0      0  00 [------]
-#7           1.0M      0      0  00 [------]
-#8              0      0      0  00 [------]
-#9              0      0      0  00 [------]
-#10             0      0      0  00 [------]
-#11             0      0      0  00 [------]
-#12            8K      0      0  00 [------]
-#13          228K      0      0  00 [------]
-#14             0      0      0  00 [------]
-#15          696K      0      0  00 [------]
-#16             0      0      0  00 [------]
-#17          300K      0      0  00 [------]
-#18             0      0      0  00 [------]
-#20           40K      0      0  00 [------]
-#22          256K      0      0  00 [------]
-#23          128K      0      0  00 [------]
-#24          1.9M      0      0  00 [------]
-#25             0      0      0  00 [------]
-#26          176K      0      0  00 [------]
-#27             0      0      0  00 [------]
-#28             0      0      0  00 [------]
-#29             0      0      0  00 [------]
-#31          616K      0      0  00 [------]
-#32             0      0      0  00 [------]
-#35          128K      0      0  00 [------]
-#37             0      0      0  00 [------]
-#38          100K      0      0  00 [------]
-#40             0      0      0  00 [------]
-#42          412K      0      0  00 [------]
-#44             0      0      0  00 [------]
-#48             0      0      0  00 [------]
-#50             0      0      0  00 [------]
-#53          288K      0      0  00 [------]
-#54             0      0      0  00 [------]
-#55             0      0      0  00 [------]
-#56          400K      0      0  00 [------]
-#58             0      0      0  00 [------]
-#61             0      0      0  00 [------]
-#63          528K      0      0  00 [------]
-#69             0      0      0  00 [------]
-#70          1.2M      0      0  00 [------]
-#72           32K      0      0  00 [------]
-#75          248K      0      0  00 [------]
-#76             0      0      0  00 [------]
-#77             0      0      0  00 [------]
-#78          632K      0      0  00 [------]
-#83          296K      0      0  00 [------]
-#89             0      0      0  00 [------]
-#91            4K      0      0  00 [------]
-#95             0      0      0  00 [------]
-#96             0      0      0  00 [------]
-#105            0      0      0  00 [------]
-#113            0      0      0  00 [------]
-#118            0      0      0  00 [------]
-#127            0      0      0  00 [------]
-#255         200M      0      0  00 [------]
+fsgqa 1024 512 2048 00 [--------] 15 10 20 00 [--------]
 
+expect a remove error at here
+checking remove command (type=u)
+XFS_QUOTARM: Invalid argument
 
-checking timer command (type=u)
+checking enable command (type=u)
+User quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: ON
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [3 days 00:00:30]
+Inodes grace time: [3 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+
+checking report command (type=u)
+fsgqa 1024 512 2048 00 [3 days] 15 10 20 00 [3 days]
 
-checking limit command, pass 1 (type=u)
-Disk quotas for User #255 (255)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]      200M   100M   100M  00 [-none-] [SCR_MNT]
-Disk quotas for User #255 (255)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1      1      2  00  [1 day] [SCR_MNT]
-
-checking warn command (type=u)
-Disk quotas for User #255 (255)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]      200M   100M   100M  04 [-none-] [SCR_MNT]
-Disk quotas for User #255 (255)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1      1      2  03  [1 day] [SCR_MNT]
-
-checking limit command, pass2 (type=u)
-Disk quotas for User #255 (255)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]      200M   300M   400M  00 [------] [SCR_MNT]
-Disk quotas for User #255 (255)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1     8k   8.8k  03 [------] [SCR_MNT]
 
-checking dump command (type=u)
-fs = [SCR_DEV]
-255         614400  819200    8000    8800  634880  839680
-changing limits (type=u)
-Disk quotas for User #255 (255)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1   1000   1.1k  00 [------] [SCR_MNT]
-checking restore command (type=u)
-Disk quotas for User #255 (255)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1     8k   8.8k  00 [------] [SCR_MNT]
+checking limit command (type=u, bsoft=100m, bhard=100m, isoft=100, ihard=100)
+
+checking quota command (type=u)
+SCRATCH_DEV 1024 102400 102400 00 [--------] 15 100 100 00 [--------] SCRATCH_MNT
+
+checking off command (type=u)
+User quota are not enabled on SCRATCH_DEV
 
 checking state command (type=u)
-User quota state on [SCR_MNT] ([SCR_DEV])
-  Accounting: ON
-  Enforcement: ON
-  Inode: #[INO] (X blocks, Y extents)
-Blocks grace time: [3 days]
-Inodes grace time: [2 days]
-Realtime Blocks grace time: [7 days]
 
+checking remove command (type=u)
+User quota are not enabled on SCRATCH_DEV
 
+checking report command (type=u)
 
-checking quot command (type=g)
+quota remount
 
-checking report command (type=g)
-Group quota on [SCR_MNT] ([SCR_DEV])
-                        Blocks              
-Group ID     Used   Soft   Hard Warn/Grace   
----------- --------------------------------- 
-#0          85.0M      0      0  00 [------]
-#1           6.1M      0      0  00 [------]
-#2           676K      0      0  00 [------]
-#3           1.9M      0      0  00 [------]
-#4           604K      0      0  00 [------]
-#5           224K      0      0  00 [------]
-#6           504K      0      0  00 [------]
-#7             4K      0      0  00 [------]
-#8           400K      0      0  00 [------]
-#9              0      0      0  00 [------]
-#10           56K      0      0  00 [------]
-#11          2.6M      0      0  00 [------]
-#12          892K      0      0  00 [------]
-#13             0      0      0  00 [------]
-#14             0      0      0  00 [------]
-#15             0      0      0  00 [------]
-#17             0      0      0  00 [------]
-#20             0      0      0  00 [------]
-#21          616K      0      0  00 [------]
-#22             0      0      0  00 [------]
-#23          472K      0      0  00 [------]
-#24             0      0      0  00 [------]
-#25           36K      0      0  00 [------]
-#26          1.1M      0      0  00 [------]
-#27          128K      0      0  00 [------]
-#28             0      0      0  00 [------]
-#30          248K      0      0  00 [------]
-#31          1.0M      0      0  00 [------]
-#33             0      0      0  00 [------]
-#34             0      0      0  00 [------]
-#35             0      0      0  00 [------]
-#36             0      0      0  00 [------]
-#37             0      0      0  00 [------]
-#38          240K      0      0  00 [------]
-#41          412K      0      0  00 [------]
-#43           32K      0      0  00 [------]
-#44             0      0      0  00 [------]
-#45             0      0      0  00 [------]
-#46             0      0      0  00 [------]
-#49             0      0      0  00 [------]
-#51          124K      0      0  00 [------]
-#53             0      0      0  00 [------]
-#55             0      0      0  00 [------]
-#56          176K      0      0  00 [------]
-#57          288K      0      0  00 [------]
-#58          528K      0      0  00 [------]
-#59             0      0      0  00 [------]
-#67            4K      0      0  00 [------]
-#69          624K      0      0  00 [------]
-#70             0      0      0  00 [------]
-#71             0      0      0  00 [------]
-#72          632K      0      0  00 [------]
-#73             0      0      0  00 [------]
-#75             0      0      0  00 [------]
-#79          100K      0      0  00 [------]
-#87          1.2M      0      0  00 [------]
-#88             0      0      0  00 [------]
-#91             0      0      0  00 [------]
-#94            4K      0      0  00 [------]
-#99          248K      0      0  00 [------]
-#101            0      0      0  00 [------]
-#108            0      0      0  00 [------]
-#112          64K      0      0  00 [------]
-#115         296K      0      0  00 [------]
-#121            0      0      0  00 [------]
-#127            0      0      0  00 [------]
-#254         200M      0      0  00 [------]
+checking report command (type=u)
+fsgqa 1024 0 0 00 [--------] 15 0 0 00 [--------]
 
 
+checking restore command (type=u)
+
+checking report command (type=u)
+fsgqa 1024 512 2048 00 [7 days] 15 10 20 00 [7 days]
+
+
+checking state command (type=u)
+User quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: ON
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [7 days 00:00:30]
+Inodes grace time: [7 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+cleanup files
+----------------------- gquota,sync ---------------------------
+create_files 1024k 15
+quota remount
+
+checking quot command (type=g)
+SCRATCH_DEV (SCRATCH_MNT) Group:
+ 1024 15 fsgqa 
+
 checking timer command (type=g)
 
-checking limit command, pass 1 (type=g)
-Disk quotas for Group #254 (254)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]      200M   100M   100M  00 [-none-] [SCR_MNT]
-Disk quotas for Group #254 (254)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1      1      2  00  [1 day] [SCR_MNT]
-
-checking warn command (type=g)
-Disk quotas for Group #254 (254)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]      200M   100M   100M  04 [-none-] [SCR_MNT]
-Disk quotas for Group #254 (254)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1      1      2  03  [1 day] [SCR_MNT]
-
-checking limit command, pass2 (type=g)
-Disk quotas for Group #254 (254)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]      200M   300M   400M  00 [------] [SCR_MNT]
-Disk quotas for Group #254 (254)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1     8k   8.8k  03 [------] [SCR_MNT]
+checking limit command (type=g, bsoft=512k, bhard=2048k, isoft=10, ihard=20)
+
+checking quota command (type=g)
+SCRATCH_DEV 1024 512 2048 00 [3 days] 15 10 20 00 [3 days] SCRATCH_MNT
 
 checking dump command (type=g)
-fs = [SCR_DEV]
-254         614400  819200    8000    8800  634880  839680
-changing limits (type=g)
-Disk quotas for Group #254 (254)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1   1000   1.1k  00 [------] [SCR_MNT]
-checking restore command (type=g)
-Disk quotas for Group #254 (254)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         1     8k   8.8k  00 [------] [SCR_MNT]
+
+checking disable command (type=g)
+Group quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: OFF
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [3 days 00:00:30]
+Inodes grace time: [3 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+
+checking report command (type=g)
+fsgqa 1024 512 2048 00 [--------] 15 10 20 00 [--------]
+
+expect a remove error at here
+checking remove command (type=g)
+XFS_QUOTARM: Invalid argument
+
+checking enable command (type=g)
+Group quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: ON
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [3 days 00:00:30]
+Inodes grace time: [3 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+
+checking report command (type=g)
+fsgqa 1024 512 2048 00 [3 days] 15 10 20 00 [3 days]
+
+
+checking limit command (type=g, bsoft=100m, bhard=100m, isoft=100, ihard=100)
+
+checking quota command (type=g)
+SCRATCH_DEV 1024 102400 102400 00 [--------] 15 100 100 00 [--------] SCRATCH_MNT
+
+checking off command (type=g)
+Group quota are not enabled on SCRATCH_DEV
 
 checking state command (type=g)
-Group quota state on [SCR_MNT] ([SCR_DEV])
-  Accounting: ON
-  Enforcement: ON
-  Inode: #[INO] (X blocks, Y extents)
-Blocks grace time: [3 days]
-Inodes grace time: [2 days]
-Realtime Blocks grace time: [7 days]
 
+checking remove command (type=g)
+Group quota are not enabled on SCRATCH_DEV
 
+checking report command (type=g)
 
-checking quot command (type=p)
+quota remount
+
+checking report command (type=g)
+fsgqa 1024 0 0 00 [--------] 15 0 0 00 [--------]
+
+
+checking restore command (type=g)
+
+checking report command (type=g)
+fsgqa 1024 512 2048 00 [7 days] 15 10 20 00 [7 days]
 
-checking report command (type=p)
-Project quota on [SCR_MNT] ([SCR_DEV])
-                        Blocks              
-Project ID   Used   Soft   Hard Warn/Grace   
----------- --------------------------------- 
-#0          85.0M      0      0  00 [------]
-#1           6.1M      0      0  00 [------]
-#2           676K      0      0  00 [------]
-#3           1.9M      0      0  00 [------]
-#4           604K      0      0  00 [------]
-#5           224K      0      0  00 [------]
-#6           504K      0      0  00 [------]
-#7             4K      0      0  00 [------]
-#8           400K      0      0  00 [------]
-#9              0      0      0  00 [------]
-#10           56K      0      0  00 [------]
-#11          2.6M      0      0  00 [------]
-#12          892K      0      0  00 [------]
-#13             0      0      0  00 [------]
-#14             0      0      0  00 [------]
-#15             0      0      0  00 [------]
-#17             0      0      0  00 [------]
-#20             0      0      0  00 [------]
-#21          616K      0      0  00 [------]
-#22             0      0      0  00 [------]
-#23          472K      0      0  00 [------]
-#24             0      0      0  00 [------]
-#25           36K      0      0  00 [------]
-#26          1.1M      0      0  00 [------]
-#27          128K      0      0  00 [------]
-#28             0      0      0  00 [------]
-#30          248K      0      0  00 [------]
-#31          1.0M      0      0  00 [------]
-#33             0      0      0  00 [------]
-#34             0      0      0  00 [------]
-#35             0      0      0  00 [------]
-#36             0      0      0  00 [------]
-#37             0      0      0  00 [------]
-#38          240K      0      0  00 [------]
-#41          412K      0      0  00 [------]
-#43           32K      0      0  00 [------]
-#44             0      0      0  00 [------]
-#45             0      0      0  00 [------]
-#46             0      0      0  00 [------]
-#49             0      0      0  00 [------]
-#51          124K      0      0  00 [------]
-#53             0      0      0  00 [------]
-#55             0      0      0  00 [------]
-#56          176K      0      0  00 [------]
-#57          288K      0      0  00 [------]
-#58          528K      0      0  00 [------]
-#59             0      0      0  00 [------]
-#67            4K      0      0  00 [------]
-#69          624K      0      0  00 [------]
-#70             0      0      0  00 [------]
-#71             0      0      0  00 [------]
-#72          632K      0      0  00 [------]
-#73             0      0      0  00 [------]
-#75             0      0      0  00 [------]
-#79          100K      0      0  00 [------]
-#87          1.2M      0      0  00 [------]
-#88             0      0      0  00 [------]
-#91             0      0      0  00 [------]
-#94            4K      0      0  00 [------]
-#99          248K      0      0  00 [------]
-#101            0      0      0  00 [------]
-#108            0      0      0  00 [------]
-#112          64K      0      0  00 [------]
-#115         296K      0      0  00 [------]
-#121            0      0      0  00 [------]
-#127            0      0      0  00 [------]
-#254         200M   300M   400M  00 [------]
 
+checking state command (type=g)
+Group quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: ON
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [7 days 00:00:30]
+Inodes grace time: [7 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+cleanup files
+----------------------- pquota,sync ---------------------------
+create_files 1024k 15
+quota remount
+
+checking quot command (type=p)
+SCRATCH_DEV (SCRATCH_MNT) Project:
+ 1024 15 fsgqa 
 
 checking timer command (type=p)
 
-checking limit command, pass 1 (type=p)
-Disk quotas for Project #253 (253)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0   100M   100M  00 [------] [SCR_MNT]
-Disk quotas for Project #253 (253)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0      1      2  00 [------] [SCR_MNT]
-
-checking warn command (type=p)
-Disk quotas for Project #253 (253)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0   100M   100M  00 [------] [SCR_MNT]
-Disk quotas for Project #253 (253)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0      1      2  00 [------] [SCR_MNT]
-
-checking limit command, pass2 (type=p)
-Disk quotas for Project #253 (253)
-Filesystem   Blocks  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0   300M   400M  00 [------] [SCR_MNT]
-Disk quotas for Project #253 (253)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0     8k   8.8k  00 [------] [SCR_MNT]
+checking limit command (type=p, bsoft=512k, bhard=2048k, isoft=10, ihard=20)
+
+checking quota command (type=p)
+SCRATCH_DEV 1024 512 2048 00 [3 days] 15 10 20 00 [3 days] SCRATCH_MNT
 
 checking dump command (type=p)
-fs = [SCR_DEV]
-253         614400  819200    8000    8800  634880  839680
-fs = [SCR_DEV]
-254         614400  819200    8000    8800  634880  839680
-changing limits (type=p)
-Disk quotas for Project #253 (253)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0   1000   1.1k  00 [------] [SCR_MNT]
-checking restore command (type=p)
-Disk quotas for Project #253 (253)
-Filesystem    Files  Quota  Limit Warn/Time    Mounted on
-[SCR_DEV]         0     8k   8.8k  00 [------] [SCR_MNT]
+
+checking disable command (type=p)
+Project quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: OFF
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [3 days 00:00:30]
+Inodes grace time: [3 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+
+checking report command (type=p)
+fsgqa 1024 512 2048 00 [--------] 15 10 20 00 [--------]
+
+expect a remove error at here
+checking remove command (type=p)
+XFS_QUOTARM: Invalid argument
+
+checking enable command (type=p)
+Project quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: ON
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [3 days 00:00:30]
+Inodes grace time: [3 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+
+checking report command (type=p)
+fsgqa 1024 512 2048 00 [3 days] 15 10 20 00 [3 days]
+
+
+checking limit command (type=p, bsoft=100m, bhard=100m, isoft=100, ihard=100)
+
+checking quota command (type=p)
+SCRATCH_DEV 1024 102400 102400 00 [--------] 15 100 100 00 [--------] SCRATCH_MNT
+
+checking off command (type=p)
+Project quota are not enabled on SCRATCH_DEV
 
 checking state command (type=p)
-Project quota state on [SCR_MNT] ([SCR_DEV])
-  Accounting: ON
-  Enforcement: ON
-  Inode: #[INO] (X blocks, Y extents)
-Blocks grace time: [3 days]
-Inodes grace time: [2 days]
-Realtime Blocks grace time: [7 days]
 
+checking remove command (type=p)
+Project quota are not enabled on SCRATCH_DEV
+
+checking report command (type=p)
 
+quota remount
 
+checking report command (type=p)
+fsgqa 1024 0 0 00 [--------] 15 0 0 00 [--------]
+
+
+checking restore command (type=p)
+
+checking report command (type=p)
+fsgqa 1024 512 2048 00 [7 days] 15 10 20 00 [7 days]
+
+
+checking state command (type=p)
+Project quota state on SCRATCH_MNT (SCRATCH_DEV)
+ Accounting: ON
+ Enforcement: ON
+ Inode: #[INO] (X blocks, Y extents)
+Blocks grace time: [7 days 00:00:30]
+Inodes grace time: [7 days 00:00:30]
+Realtime Blocks grace time: [7 days 00:00:30]
+cleanup files
-- 
2.5.5

--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Filesystems Development]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux