Ping for Btrfs folks, review please...
On Sun, Oct 26, 2014 at 11:39:03AM +0000, Filipe Manana wrote:
> Regression test for a btrfs issue where if right after the snapshot
> creation ioctl started, a file write followed by a file truncate
> happened, with both operations increasing the file's size, the created
> snapshot would capture an inconsistent state of the file system tree.
> That state reflected the file truncation but it didn't reflect the
> write operation, and left a gap between two file extent items (and
> that gap corresponded to the total or a partial area of the write
> operation's range).
>
> This issue was fixed by the following linux kernel patch:
>
> Btrfs: fix snapshot inconsistency after a file write followed by truncate
>
> Signed-off-by: Filipe Manana <fdmanana@xxxxxxxx>
> ---
>
> V2: Added some background processes to cause some cpu load. This makes the
> test fail always on environments with a non-debug kernel and where no
> other significant load (other the test itself) is running.
>
> tests/btrfs/080 | 169 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> tests/btrfs/080.out | 2 +
> tests/btrfs/group | 1 +
> 3 files changed, 172 insertions(+)
> create mode 100755 tests/btrfs/080
> create mode 100644 tests/btrfs/080.out
>
> diff --git a/tests/btrfs/080 b/tests/btrfs/080
> new file mode 100755
> index 0000000..a5d3b38
> --- /dev/null
> +++ b/tests/btrfs/080
> @@ -0,0 +1,169 @@
> +#! /bin/bash
> +# FSQA Test No. 080
> +#
> +# Regression test for a btrfs issue where if right after the snapshot creation
> +# ioctl started, a file write followed by a file truncate happened, with both
> +# operations increasing the file's size, the created snapshot would capture an
> +# inconsistent state of the file system tree. That state reflected the file
> +# truncation but it didn't reflect the write operation, and left a gap between
> +# two file extent items (and that gap corresponded to the total or a partial
> +# area of the write operation's range).
> +#
> +# This issue was fixed by the following linux kernel patch:
> +#
> +# Btrfs: fix snapshot inconsistency after a file write followed by truncate
> +#
> +#-----------------------------------------------------------------------
> +#
> +# Copyright (C) 2014 SUSE Linux Products GmbH. All Rights Reserved.
> +# Author: Filipe Manana <fdmanana@xxxxxxxx>
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + for p in ${cpu_stress_pids[*]}; do
> + kill $p &> /dev/null
> + done
> + rm -f $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_need_to_be_root
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch_nocheck
> +
> +rm -f $seqres.full
> +
> +create_snapshot()
> +{
> + local ts=`date +'%H_%M_%S_%N'`
> +
> + _run_btrfs_util_prog subvolume snapshot -r \
> + $SCRATCH_MNT $SCRATCH_MNT/"${ts}_snap"
> +}
> +
> +create_file()
> +{
> + local name=$1
> +
> + run_check $XFS_IO_PROG -f \
> + -c "pwrite -S 0xaa -b 32K 0 32K" \
> + -c "fsync" \
> + -c "pwrite -S 0xbb -b 32770 16K 32770" \
> + -c "truncate 90123" \
> + $SCRATCH_MNT/$name
> +}
> +
> +workout()
> +{
> + local name=$1
> +
> + create_file $name &
> + fpid=$!
> + create_snapshot &
> + spid=$!
> + wait $fpid
> + create_ret=$?
> + wait $spid
> + snap_ret=$?
> + if [ $create_ret != 0 -o $snap_ret != 0 ]; then
> + _fail "Failure creating file or snapshot, check $seqres.full for details"
> + fi
> +}
> +
> +# If the installed btrfs mkfs supports the no-holes feature, make sure the
> +# created fs doesn't get that feature enabled. With it enabled, the below fsck
> +# call wouldn't fail. This feature hasn't been enabled by default since it was
> +# introduced, but be safe and explicitly disable it.
> +_scratch_mkfs -O list-all 2>&1 | grep -q '\bno\-holes\b'
> +if [ $? -eq 0 ]; then
> + mkfs_options="-O ^no-holes"
> +fi
> +_scratch_mkfs "$mkfs_options" >>$seqres.full 2>&1
> +
> +_scratch_mount
> +
> +# Run some background load in order to make the issue easier to trigger.
> +# Specially needed when testing with non-debug kernels and there isn't
> +# any other significant load on the test machine other than this test.
> +num_cpus=`$here/src/feature -o`
> +num_procs=$(($num_cpus * 20))
> +for ((i = 0; i < $num_procs; i++)); do
> + while true; do
> + true
> + done &
> + cpu_stress_pids[$i]=$!
> +done
> +
> +for ((i = 1; i <= 100; i++)); do
> + workout "foobar_$i"
> +done
> +
> +for ((i = 0; i < $num_procs; i++)); do
> + kill ${cpu_stress_pids[$i]} &> /dev/null
> + unset cpu_stress_pids[$i]
> +done
> +
> +for f in $(find $SCRATCH_MNT -type f -name 'foobar_*'); do
> + digest=`md5sum $f | cut -d ' ' -f 1`
> + case $digest in
> + "d41d8cd98f00b204e9800998ecf8427e")
> + # ok, empty file
> + ;;
> + "c28418534a020122aca59fd3ff9581b5")
> + # ok, only first write captured
> + ;;
> + "cd0032da89254cdc498fda396e6a9b54")
> + # ok, only 2 first writes captured
> + ;;
> + "a1963f914baf4d2579d643425f4e54bc")
> + # ok, the 2 writes and the truncate were captured
> + ;;
> + *)
> + # not ok, truncate captured but not one or both writes
> + _fail "Unexpected digest for file $f"
> + esac
> +done
> +
> +# Check the filesystem for inconsistencies.
> +# Before the btrfs kernel fix mentioned above, we would very often get fsck
> +# error messages like: "root 306 inode 338 errors 100, file extent discount".
> +#
> +# This was because if right after the snapshot creation ioctl started, a file
> +# write followed by a file truncate, with both operations increasing the file's
> +# size, we would get a snapshot that reflected a state where the file truncation
> +# was visible but the previous file write was not visible, breaking expected
> +# total ordering of operations and causing a gap between 2 file extents, where a
> +# file extent item representing the range [32K .. ALIGN(16K + 32770, 4096)] was
> +# missing in the snapshot's btree.
> +_check_scratch_fs
> +
> +echo "Silence is golden"
> +status=0
> +exit
> diff --git a/tests/btrfs/080.out b/tests/btrfs/080.out
> new file mode 100644
> index 0000000..11a4a1a
> --- /dev/null
> +++ b/tests/btrfs/080.out
> @@ -0,0 +1,2 @@
> +QA output created by 080
> +Silence is golden
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 40e7430..801fc73 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -81,3 +81,4 @@
> 076 auto quick
> 077 auto quick
> 078 auto
> +080 auto
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Dave Chinner
david@xxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
