From: Niklas Cassel <niklas.cassel@xxxxxxx>
Commit 56440e63ac17 ("fio: report percentiles for slat, clat, lat") changed
many things. One of the changes, from the commit message:
"- for the new cmdprio_percentage latencies, if lat_percentiles=1,
*total* latency percentiles will be tracked. Otherwise, *completion*
latency percentiles will be tracked."
In other words, the commit changed the per prio stats from always tracking
(and reporting) clat latency, to instead either track (and report) clat or
lat latency.
Considering that a certain latency type reports two things:
1) min/max/avg latency for the the specific latency type
2) latency percentiles for the specific latency type
If disable_clat/disable_lat is used, neither 1) nor 2) will be reported.
If clat_percentiles/lat_percentiles is false, 2) will not be reported.
Therefore it is unintuitive that setting lat_percentiles=1, an option
usually used to enable/disable percentile reporting, also affects which
type of latency that will be tracked (and reported) for per prio stats.
The fact that the variables are named e.g. clat_prio_stat, regardless of
the type of latency being tracked does not help.
Anyway, let's document the way that the current implementation works,
so that a user can know how per priority stats are handled, without having
to read the source, since the commit that introduced this behavior forgot
to update the documentation.
Fixes: 56440e63ac17 ("fio: report percentiles for slat, clat, lat")
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxx>
---
HOWTO | 6 +++++-
fio.1 | 5 ++++-
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/HOWTO b/HOWTO
index a3b3acfe..8c9e4135 100644
--- a/HOWTO
+++ b/HOWTO
@@ -2169,7 +2169,11 @@ with the caveat that when used on the command line, they must come after the
Default: 0. A single value applies to reads and writes. Comma-separated
values may be specified for reads and writes. For this option to be
effective, NCQ priority must be supported and enabled, and `direct=1'
- option must be used. fio must also be run as the root user.
+ option must be used. fio must also be run as the root user. Unlike
+ slat/clat/lat stats, which can be tracked and reported independently, per
+ priority stats only track and report a single type of latency. By default,
+ completion latency (clat) will be reported, if :option:`lat_percentiles` is
+ set, total latency (lat) will be reported.
.. option:: cmdprio_class=int[,int] : [io_uring] [libaio]
diff --git a/fio.1 b/fio.1
index a6469541..a3ebb67d 100644
--- a/fio.1
+++ b/fio.1
@@ -1967,7 +1967,10 @@ Set the percentage of I/O that will be issued with the highest priority.
Default: 0. A single value applies to reads and writes. Comma-separated
values may be specified for reads and writes. For this option to be effective,
NCQ priority must be supported and enabled, and `direct=1' option must be
-used. fio must also be run as the root user.
+used. fio must also be run as the root user. Unlike slat/clat/lat stats, which
+can be tracked and reported independently, per priority stats only track and
+report a single type of latency. By default, completion latency (clat) will be
+reported, if \fBlat_percentiles\fR is set, total latency (lat) will be reported.
.TP
.BI (io_uring,libaio)cmdprio_class \fR=\fPint[,int]
Set the I/O priority class to use for I/Os that must be issued with a
--
2.33.1
