Re: [PATCH v3 3/6] t/zbd: Mandate blkzone capacity report for devices with zone capacity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020/07/17 18:36, Shin'ichiro Kawasaki wrote:
> For NVMe ZNS and null_blk zoned drives, a zone capacity can be smaller
> than its size. To test zone capacity handling by fio for these devices,
> t/zbd/test-zbd-support must be able to discover zone capacities to avoid
> test failures.
> 
> To avoid the failures, make zone capacity report by blkzone mandatory if
> the test target device is a ZNS device or a null_blk device.
> 
> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@xxxxxxx>
> ---
>  t/zbd/functions        | 45 ++++++++++++++++++++++++++++++++++++++++++
>  t/zbd/test-zbd-support |  3 +++
>  2 files changed, 48 insertions(+)
> 
> diff --git a/t/zbd/functions b/t/zbd/functions
> index 1bd22ec4..14366e15 100644
> --- a/t/zbd/functions
> +++ b/t/zbd/functions
> @@ -19,6 +19,51 @@ if [ -n "${use_libzbc}" ] &&
>      exit 1
>  fi
>  
> +blkzone_reports_capacity() {
> +	local dev="${1}"
> +
> +	[[ -n "${blkzone}" ]] &&
> +		"${blkzone}" report -c 1 -o 0 "${dev}" | grep -q 'cap '
> +}
> +
> +# Whether or not $1 (/dev/...) is a NVME ZNS device.
> +is_nvme_zns() {
> +	local s
> +
> +	s=/sys/block/$(basename "${1}")/device/subsystem
> +
> +	if [[ ! -h "${s}" || $(realpath "${s}") != /sys/class/nvme ]]; then
> +		return 1
> +	fi
> +
> +	[[ $(</sys/block/$(basename "${1}")/queue/zoned) == host-managed ]]
> +}
> +
> +# Whether or not $1 (/dev/...) is a null_blk device with zone capacity smaller
> +# than zone size.
> +is_nullb_with_zone_cap() {
> +	local f
> +
> +	f=/sys/kernel/config/nullb/$(basename "${1}")
> +	[[ -r "${f}/zone_capacity" &&
> +		   $(<"${f}/zone_capacity") -lt $(<"${f}/zone_size") ]]
> +}
> +
> +# Check if blkzone is available and suitable for the test target device. If not
> +# available, print error message and return 1. Otherwise return 0.
> +check_blkzone() {
> +	local dev="${1}"
> +
> +	# If the device supports zone capacity, mandate zone capacity report by
> +	# blkzone.
> +	if (is_nvme_zns "${dev}" || is_nullb_with_zone_cap "${dev}") &&
> +				! blkzone_reports_capacity "${dev}"; then
> +		echo "Error: blkzone does not report zone capacity"
> +		echo "Error: install latest util-linux with blkzone"
> +		return 1
> +	fi
> +}
> +
>  # Reports the starting sector and length of the first sequential zone of device
>  # $1.
>  first_sequential_zone() {
> diff --git a/t/zbd/test-zbd-support b/t/zbd/test-zbd-support
> index 80dc3f30..f086bd10 100755
> --- a/t/zbd/test-zbd-support
> +++ b/t/zbd/test-zbd-support
> @@ -863,6 +863,9 @@ if [[ -b "$realdev" ]]; then
>  	case "$(<"/sys/class/block/$basename/queue/zoned")" in
>  	host-managed|host-aware)
>  		is_zbd=true
> +		if ! check_blkzone "${dev}"; then
> +			exit 1
> +		fi
>  		if ! result=($(first_sequential_zone "$dev")); then
>  			echo "Failed to determine first sequential zone"
>  			exit 1
> 

Looks good to me.

Reviewed-by: Damien Le Moal <damien.lemoal@xxxxxxx>

-- 
Damien Le Moal
Western Digital Research




[Index of Archives]     [Linux Kernel]     [Linux SCSI]     [Linux IDE]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux