The following changes since commit 4e8c82b4e9804c52bf2c78327cc5bfca9d8aedfc:
nbd: Update for libnbd 0.9.8 (2019-08-15 10:42:01 -0600)
are available in the Git repository at:
git://git.kernel.dk/fio.git master
for you to fetch changes up to 0b288ba164c10009ea9f4a2c737bd29863ebc60c:
options: allow offset_increment to understand percentages (2019-08-28 13:45:37 -0600)
----------------------------------------------------------------
Vincent Fu (2):
docs: small HOWTO fixes
options: allow offset_increment to understand percentages
HOWTO | 12 ++++++++++--
cconv.c | 2 ++
filesetup.c | 32 ++++++++++++++++++++++----------
fio.1 | 4 +++-
options.c | 17 +++++++++++++++++
server.h | 2 +-
thread_options.h | 3 +++
7 files changed, 58 insertions(+), 14 deletions(-)
---
Diff of recent changes:
diff --git a/HOWTO b/HOWTO
index 41b959d1..4201e2e9 100644
--- a/HOWTO
+++ b/HOWTO
@@ -93,6 +93,12 @@ Command line options
Dump info related to I/O rate switching.
*compress*
Dump info related to log compress/decompress.
+ *steadystate*
+ Dump info related to steadystate detection.
+ *helperthread*
+ Dump info related to the helper thread.
+ *zbd*
+ Dump info related to support for zoned block devices.
*?* or *help*
Show available debug options.
@@ -1246,7 +1252,9 @@ I/O type
is incremented for each sub-job (i.e. when :option:`numjobs` option is
specified). This option is useful if there are several jobs which are
intended to operate on a file in parallel disjoint segments, with even
- spacing between the starting points.
+ spacing between the starting points. Percentages can be used for this option.
+ If a percentage is given, the generated offset will be aligned to the minimum
+ ``blocksize`` or to the value of ``offset_align`` if provided.
.. option:: number_ios=int
@@ -2388,7 +2396,7 @@ I/O depth
this option can reduce both performance and the :option:`iodepth` achieved.
This option only applies to I/Os issued for a single job except when it is
- enabled along with :option:`io_submit_mode`=offload. In offload mode, fio
+ enabled along with :option:`io_submit_mode`\=offload. In offload mode, fio
will check for overlap among all I/Os submitted by offload jobs with :option:`serialize_overlap`
enabled.
diff --git a/cconv.c b/cconv.c
index 0e657246..bff5e34f 100644
--- a/cconv.c
+++ b/cconv.c
@@ -226,6 +226,7 @@ void convert_thread_options_to_cpu(struct thread_options *o,
o->zone_skip = le64_to_cpu(top->zone_skip);
o->zone_mode = le32_to_cpu(top->zone_mode);
o->lockmem = le64_to_cpu(top->lockmem);
+ o->offset_increment_percent = le32_to_cpu(top->offset_increment_percent);
o->offset_increment = le64_to_cpu(top->offset_increment);
o->number_ios = le64_to_cpu(top->number_ios);
@@ -566,6 +567,7 @@ void convert_thread_options_to_net(struct thread_options_pack *top,
top->start_offset_align = __cpu_to_le64(o->start_offset_align);
top->start_offset_percent = __cpu_to_le32(o->start_offset_percent);
top->trim_backlog = __cpu_to_le64(o->trim_backlog);
+ top->offset_increment_percent = __cpu_to_le32(o->offset_increment_percent);
top->offset_increment = __cpu_to_le64(o->offset_increment);
top->number_ios = __cpu_to_le64(o->number_ios);
top->rate_process = cpu_to_le32(o->rate_process);
diff --git a/filesetup.c b/filesetup.c
index 57eca1bf..7904d187 100644
--- a/filesetup.c
+++ b/filesetup.c
@@ -852,16 +852,37 @@ static unsigned long long get_fs_free_counts(struct thread_data *td)
uint64_t get_start_offset(struct thread_data *td, struct fio_file *f)
{
+ bool align = false;
struct thread_options *o = &td->o;
unsigned long long align_bs;
unsigned long long offset;
+ unsigned long long increment;
if (o->file_append && f->filetype == FIO_TYPE_FILE)
return f->real_file_size;
+ if (o->offset_increment_percent) {
+ assert(!o->offset_increment);
+ increment = o->offset_increment_percent * f->real_file_size / 100;
+ align = true;
+ } else
+ increment = o->offset_increment;
+
if (o->start_offset_percent > 0) {
+ /* calculate the raw offset */
+ offset = (f->real_file_size * o->start_offset_percent / 100) +
+ (td->subjob_number * increment);
+
+ align = true;
+ } else {
+ /* start_offset_percent not set */
+ offset = o->start_offset +
+ td->subjob_number * increment;
+ }
+
+ if (align) {
/*
- * if offset_align is provided, set initial offset
+ * if offset_align is provided, use it
*/
if (fio_option_is_set(o, start_offset_align)) {
align_bs = o->start_offset_align;
@@ -870,20 +891,11 @@ uint64_t get_start_offset(struct thread_data *td, struct fio_file *f)
align_bs = td_min_bs(td);
}
- /* calculate the raw offset */
- offset = (f->real_file_size * o->start_offset_percent / 100) +
- (td->subjob_number * o->offset_increment);
-
/*
* block align the offset at the next available boundary at
* ceiling(offset / align_bs) * align_bs
*/
offset = (offset / align_bs + (offset % align_bs != 0)) * align_bs;
-
- } else {
- /* start_offset_percent not set */
- offset = o->start_offset +
- td->subjob_number * o->offset_increment;
}
return offset;
diff --git a/fio.1 b/fio.1
index 97371d77..a06a12da 100644
--- a/fio.1
+++ b/fio.1
@@ -1015,7 +1015,9 @@ If this is provided, then the real offset becomes `\fBoffset\fR + \fBoffset_incr
is incremented for each sub\-job (i.e. when \fBnumjobs\fR option is
specified). This option is useful if there are several jobs which are
intended to operate on a file in parallel disjoint segments, with even
-spacing between the starting points.
+spacing between the starting points. Percentages can be used for this option.
+If a percentage is given, the generated offset will be aligned to the minimum
+\fBblocksize\fR or to the value of \fBoffset_align\fR if provided.
.TP
.BI number_ios \fR=\fPint
Fio will normally perform I/Os until it has exhausted the size of the region
diff --git a/options.c b/options.c
index 447f231e..2c5bf5e0 100644
--- a/options.c
+++ b/options.c
@@ -1434,6 +1434,22 @@ static int str_offset_cb(void *data, unsigned long long *__val)
return 0;
}
+static int str_offset_increment_cb(void *data, unsigned long long *__val)
+{
+ struct thread_data *td = cb_data_to_td(data);
+ unsigned long long v = *__val;
+
+ if (parse_is_percent(v)) {
+ td->o.offset_increment = 0;
+ td->o.offset_increment_percent = -1ULL - v;
+ dprint(FD_PARSE, "SET offset_increment_percent %d\n",
+ td->o.offset_increment_percent);
+ } else
+ td->o.offset_increment = v;
+
+ return 0;
+}
+
static int str_size_cb(void *data, unsigned long long *__val)
{
struct thread_data *td = cb_data_to_td(data);
@@ -2084,6 +2100,7 @@ struct fio_option fio_options[FIO_MAX_OPTS] = {
.name = "offset_increment",
.lname = "IO offset increment",
.type = FIO_OPT_STR_VAL,
+ .cb = str_offset_increment_cb,
.off1 = offsetof(struct thread_options, offset_increment),
.help = "What is the increment from one offset to the next",
.parent = "offset",
diff --git a/server.h b/server.h
index ac713252..de1d7f9b 100644
--- a/server.h
+++ b/server.h
@@ -48,7 +48,7 @@ struct fio_net_cmd_reply {
};
enum {
- FIO_SERVER_VER = 79,
+ FIO_SERVER_VER = 80,
FIO_SERVER_MAX_FRAGMENT_PDU = 1024,
FIO_SERVER_MAX_CMD_MB = 2048,
diff --git a/thread_options.h b/thread_options.h
index 14c6969f..ee6e4d6d 100644
--- a/thread_options.h
+++ b/thread_options.h
@@ -313,6 +313,7 @@ struct thread_options {
int flow_watermark;
unsigned int flow_sleep;
+ unsigned int offset_increment_percent;
unsigned long long offset_increment;
unsigned long long number_ios;
@@ -599,6 +600,8 @@ struct thread_options_pack {
int32_t flow_watermark;
uint32_t flow_sleep;
+ uint32_t offset_increment_percent;
+ uint32_t pad4;
uint64_t offset_increment;
uint64_t number_ios;
