* Juergen Salk <juergen.salk@xxxxxxxxxx> [130918 16:58]:
>
> --- snip ---
>
> [global]
> ioengine=sync
> direct=0
> # Block sizes for I/O units: 25% 19k, 15% 177k, 60% 350k
> bssplit=19k/25:177k/15:350k/60
> # Use mixed workload: 30% random IO, 70% sequential IO
> percentage_random=30
> size=${SIZE}
> numjobs=${NUMJOBS}
> runtime=${RUNTIME}
> directory=${DIRECTORY}
>
> [application]
> # Define of I/O pattern: Random read.
> rw=randread
>
> --- snip ---
>
> This is run with the following command:
>
> $ RUNTIME=0 NUMJOBS=4 SIZE=4096m DIRECTORY=/work/testsoft fio jobfile.fio >fio.out 2>&1
>
> I have noticed from the output file, that this results in different
> amounts of data read by the individual processes:
>
> $ grep io= fio.out
> read : io=5847.5MB, bw=149458KB/s, iops=627, runt= 40063msec
> read : io=4096.2MB, bw=140358KB/s, iops=595, runt= 29884msec
> read : io=4096.3MB, bw=140889KB/s, iops=596, runt= 29772msec
> read : io=5246.4MB, bw=134821KB/s, iops=560, runt= 39847msec
> READ: io=19286MB, aggrb=492947KB/s, minb=134820KB/s, maxb=149458KB/s, mint=29772msec, maxt=40063msec
>
> I have expected that every individual process will read
> its 4096 MB and then stop further reading. Or am I missing
> something?
Hi,
I'm still a bit puzzled about the amount of data read by
individual processes spawned by fio. Given the following (now
simplified) job file:
--- snip ---
[global]
ioengine=sync
direct=0
bssplit=19k/25:177k/15:350k/60
size=100m
numjobs=4
directory=/tmp
[work]
rw=randread
--- snip ---
$ fio jobfile.fio >fio.out
$ grep io= fio.out
read : io=199968KB, bw=4892.6KB/s, iops=27, runt= 40872msec
read : io=200062KB, bw=5083.5KB/s, iops=28, runt= 39359msec
read : io=200156KB, bw=4989.1KB/s, iops=27, runt= 40112msec
read : io=199940KB, bw=4492.4KB/s, iops=24, runt= 44507msec
READ: io=800126KB, aggrb=17977KB/s, minb=4492KB/s, maxb=5083KB/s, mint=39359msec, maxt=44507msec
I.e. every individual process reads approx. 200 MB of data rather
than 100 MB as specified in the job file. For sequential reads
(i.e. replaced rw=randread by rw=read, but otherwise unchanged job
file) the amount of data read by each process is close to 100 MB as
expected.
I am probably missing something obvious, but why does the job file
above result in 200 MB read by every process?
Thanks in advance.
Juergen
--
To unsubscribe from this list: send the line "unsubscribe fio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
