On 04/19/2012 12:14 AM, Suresh Dhanarajan wrote: > Hi Jens, > > I am using the verify option with mix read and write case. > When verify option is I am seeing that the results are not reflecting > the actual percentage given in the jobfile. > When i don't use verify option the results are exactly as per the > percentage given in the jobfile. > > Please fin the result for various cases with and without verify option, > > withverify sequential :- > Total IO (KB), bandwidth (KB/sec), IOPS, runtime (msec) > 2988;2436;594;1256 > 10240;6565;1603;1597 > =================== > wthoutverify sequential :- > Total IO (KB), bandwidth (KB/sec), IOPS, runtime (msec) > 3124;2460;600;1300 > 7116;5605;1368;1300 > =================== > > random with verify > Total IO (KB), bandwidth (KB/sec), IOPS, runtime (msec) > 3088;431;105;7322 > 10240;1363;332;7693 > =============== > > random without verify > Total IO (KB), bandwidth (KB/sec), IOPS, runtime (msec) > 3076;430;105;7311 > 7164;1003;244;7311 > > I used 70% read and 30% write option. > Is it that when verify is used the mix percentage wont be honored? > I had mentioned size has 10mb but when verify is used even that is not > getting honored. > Is there a way to make this case to honor the percentage set in the job file? The reads that are done to verify a written block are not accounted in the read/write mix ratio. So that is why you see more reads than you asked for. -- Jens Axboe -- To unsubscribe from this list: send the line "unsubscribe fio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
