On 2011-11-18 00:06, Ross Becker wrote: > I am having some difficulty with fio using /dev/rdsk devices under > Solaris. My best guess at this point is that fio is doing something > incorrect when it attempts to determine the size of a /dev/rdsk device. > Everything works if I use /dev/rdsk/c0t5SOMEDISKd0p0, but if I create a > partition which is not as large as the complete disk, when I point fio at > the /dev/rdsk device (e.g. /dev/rdsk/c0t5SOMEDISKd0p1), fio promptly bombs > out. If I point fio at the /dev/dsk device (e.g. > /dev/dsk/c0t5SOMEDISKd0p1), fio works, though I typically get half to a > third of the performance using the /dev/dsk devices. > > I have tested using the "dd" utility, and validated that "dd" will use the > /dev/rdsk devices and access only part of the drive without a problem. > > I am testing on solaris 11 x86, and I have tested fio versions 1.54 and > 1.99. Both versions of fio failed the same way. > > Here's what fio looks like when it bombs out: > rand-read: (g=0): rw=randrw, bs=32K-32K/32K-32K, ioengine=solarisaio, > iodepth=8 > ... > rand-read: (g=0): rw=randrw, bs=32K-32K/32K-32K, ioengine=solarisaio, > iodepth=8 > fio 1.54 > Starting 4 processes > fio: io_u error on file /dev/rdsk/c0t500151795968D5ABd0p1: I/O error > read offset=134944555008, buflen=32768 > fio: io_u error on file /dev/rdsk/c0t500151795968D5ABd0p1: I/O error > write offset=134455656448, buflen=32768 > fio: pid=1382, err=5/file:io_u.c:1197, func=io_u error, error=I/O error > fio: io_u error on file /dev/rdsk/c0t500151795968D5ABd0p1: I/O error > read offset=156234678272, buflen=32768 > fio: pid=1383, err=5/file:io_u.c:1197, func=io_u error, error=I/O error > fio: io_u error on file /dev/rdsk/c0t500151795968D5ABd0p1: I/O error > read offset=131076620288, buflen=32768 > fio: io_u error on file /dev/rdsk/c0t500151795968D5ABd0p1: I/O error > write offset=155262877696, buflen=32768 > fio: pid=1384, err=5/file:io_u.c:1197, func=io_u error, error=I/O error > fio: io_u error on file /dev/rdsk/c0t500151795968D5ABd0p1: I/O error > read offset=156624125952, buflen=32768 > fio: pid=1385, err=5/file:io_u.c:1197, func=io_u error, error=I/O error > > > Here is my fio config file: > > [global] > bs=32k > ioengine=solarisaio > iodepth=8 > openfiles=1024 > runtime=60 > ramp_time=10 > filename=/dev/rdsk/c0t500151795968D5ABd0p1 > > > > [rand-read] > rw=randrw > numjobs=4 > rwmixwrite=20 > norandommap=1 > file_service_type=random > group_reporting > > > > What additional information, if any should I provide? I think you provided all you need. When I get my hands on a Solaris box, I can take a look. Sounds like the ioctl for retrieving device size always returns the full size, not just the partition. So should be en easy fix, perhaps there's an alternative API that could be used. -- Jens Axboe -- To unsubscribe from this list: send the line "unsubscribe fio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
