On Mon, 2009-06-22 at 19:57 +0200, Jens Axboe wrote:
> On Mon, Jun 22 2009, Richard Kennedy wrote:
> >
> > > In any case, please try and download a new fresh version and see if that
> > > makes it any better.
> > >
> > > There was also a recent linux kernel futex problem that fio triggered,
> > > so it could also be a kernel issue. Again, knowing what the two other
> > > jobs are doing would help.
> > >
> > Hi Jens,
> >
> > 'strace -f' running on a freshly built fio 1.28
> >
> > It runs somewhat slowly but I just get lots of reads & writes like these
> >
> > [pid 6597] gettimeofday({1245679454, 899777}, NULL) = 0
> > [pid 6597] lseek(8, 419278848, SEEK_SET) = 419278848
> > [pid 6597] gettimeofday({1245679454, 899917}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 899988}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 900059}, NULL) = 0
> > [pid 6597] write(8, "+\265bB\305\243g+\214\313\313\377\20H\237\356\266
> > \326X\335<\37\317K\207\317,/\335J\206\267\33"..., 4096) = 4096
> > [pid 6597] gettimeofday({1245679454, 900244}, NULL) = 0
> > [pid 6597] lseek(8, 419282944, SEEK_SET) = 419282944
> > [pid 6597] gettimeofday({1245679454, 900391}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 900463}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 900534}, NULL) = 0
> > [pid 6597] read(8, "+\265bB\305\243g+\214\313\313\377\20H\237\356\266
> > \326X\335<\37\317K\207\317,/\335J\206\267\33"..., 4096) = 4096
> > [pid 6597] gettimeofday({1245679454, 900705}, NULL) = 0
> > [pid 6597] lseek(8, 419287040, SEEK_SET) = 419287040
> > [pid 6597] gettimeofday({1245679454, 900845}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 900914}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 900985}, NULL) = 0
> > [pid 6597] write(8, "+\265bB\305\243g+\214\313\313\377\20H\237\356\266
> > \326X\335<\37\317K\207\317,/\335J\206\267\33"..., 4096) = 4096
> > [pid 6597] gettimeofday({1245679454, 901171}, NULL) = 0
> > [pid 6597] lseek(8, 419291136, SEEK_SET) = 419291136
> > [pid 6597] gettimeofday({1245679454, 901309}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 901379}, NULL) = 0
> > [pid 6597] gettimeofday({1245679454, 901460}, NULL) = 0
> > [pid 6597] read(8, "+\265bB\305\243g+\214\313\313\377\20H\237\356\266
> > \326X\335<\37\317K\207\317,/\335J\206\267\33"..., 4096) = 4096
> >
> >
> > where pid 6597 is job f1
> >
> > I'll rebuild my kernel from the latest git, and check that.
>
> So it's still running, perhaps the eta is just off. Is write back
> caching disabled on that drive?
>
It seems better on the latest git kernel, the time for the complete test
is now 1m30.
Although the eta times do seem strange. As fio starts up I see extremely
large eta's flash up , i.e. some huge number of days, but I haven't
managed to capture one yet, and it says it's finished long before it
actually stops.
Yes, strangely the write_cache is disabled on sda, but enabled on sdb.
I'll turn it on and see if there's any difference.
regards
Richard
--
To unsubscribe from this list: send the line "unsubscribe fio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
