On Thu, Oct 29, 2009 at 08:58:44PM -0700, Caz Yokoyama wrote: > Hello Pasi, > Thank you for the reply. > Do you have /proc/xen mounted? - yes, there is. But there is nothing there. So it's not mounted :) You should have files there.. http://wiki.xensource.com/xenwiki/XenParavirtOps Do you have this line in /etc/fstab: none /proc/xen xenfs defaults 0 0 > Does "virsh list" work? - error: failed to connect to the hypervisor > This means xend is not running. I see S98xend in /etc/rd5.d. "ps ax" shows > xenwatch and xenbus, but no xend. xend doesn't start because /proc/xen is not mounted.. most probably. -- Pasi > -caz > -----Original Message----- > From: Pasi Kärkkäinen [mailto:pasik@xxxxxx] > Sent: Thursday, October 29, 2009 6:44 AM > To: Caz Yokoyama > Cc: 'Fasiha Ashraf'; 'xen'; virt-tools-list@xxxxxxxxxx; 'Fedora Xen' > Subject: Re: [Xen-devel] Virt-manager issue resolved > > On Thu, Oct 29, 2009 at 06:19:03AM -0700, Caz Yokoyama wrote: > > Could you summarize the procedure? I am trying to run virt-manager on > > Fedora 11 with Xen-3.5-unstable and Jeremy's Dom0 > > (git://git.kernel.org/pub/scm/linux/kernel/git/Jeremy/xen.git). I am > > wondering what option should be good on make on xen-3.5-unstable. I did > > > > Make xen tools > > > > Make install-xen install-tools > > > > What else I need do? > > > > Booting dom0 is fine. > > > > Do you have /proc/xen mounted? > > Does "virsh list" work? > Does "virsh --connect xen:/// capabilities" work? > Does "virsh --connect xen:/// version" work? > > Did you install all the latest updates to F11? Iirc there was some > xen-related fixes in the virt* updates.. > > -- Pasi > > > -caz > > > > > -------------------------------------------------------------------------- > > > > From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx > > [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Fasiha > Ashraf > > Sent: Tuesday, October 27, 2009 4:49 AM > > To: Cole Robinson; xen > > Cc: Fedora Xen; virt-tools-list@xxxxxxxxxx > > Subject: [Xen-devel] Virt-manager issue resolved > > > > > > > > I have got para-virt option enabled by installing vm using through http. > the problem was, i was trying to install it from > > DVD. Now the issue is it doesn't find the file on the givern location > although i can access them from the same location in > > browser. PFA, the screen shots for the problem. > > > > Regards > > Fasiha Ashraf > > > > --- On Mon, 26/10/09, Cole Robinson <crobinso@xxxxxxxxxx> wrote: > > > > From: Cole Robinson <crobinso@xxxxxxxxxx> > > Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not > found: xenUnifiedDomainLookupByName > > To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx> > > Cc: virt-tools-list@xxxxxxxxxx, bderzhavets@xxxxxxxxx, "Xen users" > <james.harper@xxxxxxxxxxxxxxxx>, "Fedora Xen" > > <fedora-xen@xxxxxxxxxx> > > Date: Monday, 26 October, 2009, 7:08 PM > > > > On 10/26/2009 09:24 AM, Fasiha Ashraf wrote: > > > It seem that its trying to install HVM guest that is not possible using > virt-manager. > > > But you can see from the attached screen shot that virt type option is > disabled and i can't select paravirt from it. what > > should i do? > > > here's the log .virt-manager/virt-manager.log > > > > > > > Please include the other information I asked for: > > > > virsh --connect xen:/// capabilities > > virsh --connect xen:/// version > > > > - Cole > > > > > [Mon, 26 Oct 2009 16:11:51 virt-manager 3019] DEBUG > (DistroInstaller:119) DistroInstaller location is a local file/path: > > /dev/sr0 > > > [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG > (DistroInstaller:119) DistroInstaller location is a local file/path: > > /dev/sr0 > > > [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (create:877) Default > storage path is: /var/lib/libvirt/images/f.img > > > [Mon, 26 Oct 2009 16:12:01 virt-manager 3019] DEBUG (VirtualDisk:737) > Path '/var/lib/libvirt/images' is target for pool > > 'default'. Creating volume 'f.img'. > > > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG > (DistroInstaller:119) DistroInstaller location is a local file/path: > > /dev/sr0 > > > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:877) Default > storage path is: /var/lib/libvirt/images/f.img > > > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (VirtualDisk:737) > Path '/var/lib/libvirt/images' is target for pool > > 'default'. Creating volume 'f.img'. > > > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1516) > Creating a VM f > > > Type: xen,hvm > > > UUID: 01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3 > > > Install Source: /dev/sr0 > > > OS: linux:fedora11 > > > Kernel args: None > > > Memory: 512 > > > Max Memory: 512 > > > # VCPUs: 1 > > > Filesize: 7.0 > > > [Mon, 26 Oct 2009 16:12:17 virt-manager 3019] DEBUG (create:1565) > Starting background install process > > > [Mon, 26 Oct 2009 16:12:18 virt-manager 3019] DEBUG (Storage:950) > Creating storage volume 'f.img' with xml: > > > <volume> > > > <name>f.img</name> > > > <capacity>7516192768</capacity> > > > <allocation>7516192768</allocation> > > > <target> > > > <format type='raw'/> > > > </target> > > > </volume> > > > [Mon, 26 Oct 2009 16:13:08 virt-manager 3019] DEBUG (Storage:973) > Storage volume 'f.img' install complete. > > > [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (Guest:724) Creating > guest from: > > > <domain type='xen'> > > > <name>f</name> > > > <currentMemory>524288</currentMemory> > > > <memory>524288</memory> > > > <uuid>01f35eb7-fe09-c231-bfe0-1e9bfc6ff5a3</uuid> > > > <os> > > > <type arch='x86_64'>hvm</type> > > > <loader>/usr/lib/xen/boot/hvmloader</loader> > > > <boot dev='cdrom'/> > > > </os> > > > <features> > > > <acpi/><apic/><pae/> > > > </features> > > > <clock offset="utc"/> > > > <on_poweroff>destroy</on_poweroff> > > > <on_reboot>destroy</on_reboot> > > > <on_crash>destroy</on_crash> > > > <vcpu>1</vcpu> > > > <devices> > > > <emulator>/usr/lib64/xen/bin/qemu-dm</emulator> > > > <disk type='file' device='disk'> > > > <source file='/var/lib/libvirt/images/f.img'/> > > > <target dev='hda' bus='ide'/> > > > </disk> > > > <disk type='block' device='cdrom'> > > > <source dev='/dev/sr0'/> > > > <target dev='hdc' bus='ide'/> > > > <readonly/> > > > </disk> > > > <interface type='bridge'> > > > <source bridge='eth0'/> > > > <mac address='00:16:36:08:9e:36'/> > > > </interface> > > > <input type='tablet' bus='usb'/> > > > <graphics type='vnc' port='-1'/> > > > <console type='pty'/> > > > <sound model='es1370'/> > > > </devices> > > > </domain> > > > > > > [Mon, 26 Oct 2009 16:13:10 virt-manager 3019] DEBUG (netdevhelper:176) > Adding net device vif3.0 fe:ff:ff:ff:ff:ff > > /sys/class/net/vif3.0 (bridge: None) > > > [Mon, 26 Oct 2009 16:13:12 virt-manager 3019] DEBUG (engine:187) Tick is > slow, not running at requested rate. > > > [Mon, 26 Oct 2009 16:13:13 virt-manager 3019] DEBUG (engine:187) Tick is > slow, not running at requested rate. > > > [Mon, 26 Oct 2009 16:13:14 virt-manager 3019] DEBUG (engine:187) Tick is > slow, not running at requested rate. > > > [Mon, 26 Oct 2009 16:13:15 virt-manager 3019] DEBUG (engine:187) Tick is > slow, not running at requested rate. > > > [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (netdevhelper:138) > Removing physical net device vif3.0 from list. > > > [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (opticalhelper:205) > Optical device removed: > > /org/freedesktop/Hal/devices/net_fe_ff_ff_ff_ff_ff > > > [Mon, 26 Oct 2009 16:14:46 virt-manager 3019] DEBUG (error:76) Uncaught > Error: Unable to complete install: 'POST operation > > failed: xend_post: error from xen $ > > > Traceback (most recent call last): > > > File "/usr/share/virt-manager/virtManager/create.py", line 1575, in > do_install > > > dom = guest.start_install(False, meter = meter) > > > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, > in start_install > > > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, in > start_install > > > return self._do_install(consolecb, meter, removeOld, wait) > > > File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, > in _do_install > > > self.domain = self.conn.createLinux(install_xml, 0) > > > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in > createLinux > > > if ret is None:raise libvirtError('virDomainCreateLinux() failed', > conn=self) > > > libvirtError: POST operation failed: xend_post: error from xen daemon: > <Fault 3: 'f'> > > > ' > > > [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:377) window > counter decremented to 0 > > > [Mon, 26 Oct 2009 16:16:38 virt-manager 3019] DEBUG (engine:385) Exiting > app normally. > > > > > > > > > > > > Fasiha Ashraf > > > > > > --- On Mon, 26/10/09, Cole Robinson <[1]crobinso@xxxxxxxxxx> wrote: > > > > > > From: Cole Robinson <[2]crobinso@xxxxxxxxxx> > > > Subject: Re: [virt-tools-list] Unable to complete install: 'Domain not > found: xenUnifiedDomainLookupByName > > > To: "Fasiha Ashraf" <[3]feehapk@xxxxxxxxxxx> > > > Cc: [4]virt-tools-list@xxxxxxxxxx, [5]bderzhavets@xxxxxxxxx, "Xen users" > <[6]james.harper@xxxxxxxxxxxxxxxx>, "Fedora Xen" > > <[7]fedora-xen@xxxxxxxxxx> > > > Date: Monday, 26 October, 2009, 5:58 PM > > > > > > On 10/26/2009 06:48 AM, Fasiha Ashraf wrote: > > >> Hi all > > >> I am facing this error while installing Guest VM on FC11 using > virt-manager > > >> Unable to complete install '<class 'libvirt.libvirtError'> Domain not > found: xenUnifiedDomainLookupByName > > >> Traceback (most recent call last): > > >> File "/usr/share/virt-manager/virtManager/create.py", line 1575, in > do_install > > >> dom = guest.start_install(False, meter = meter) > > >> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 628, > in start_install > > >> return self._do_install(consolecb, meter, removeOld, wait) > > >> File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 726, > in _do_install > > >> self.domain = self.conn.createLinux(install_xml, 0) > > >> File "/usr/lib64/python2.6/site-packages/libvirt.py", line 1077, in > createLinux > > >> if ret is > > >> None:raise libvirtError('virDomainCreateLinux() failed', conn=self) > > >> libvirtError: Domain not found: xenUnifiedDomainLookupByName > > >> ' > > >> What should i do to avoid it? please help! > > >> Boris! How did you create PV guests using virt-manager i am following > your article > > >> > [8]http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4 > -1-dom0-on-to-fedora-11-64-bit/#comment-623 > > >> PFA, a screen-shot of the virt-manager > > >> > > >> Regards, > > >> Fasiha Ashraf > > >> > > > > > > CCing fedora-xen list. > > > > > > Rather than a screenshot, can you include: > > > > > > ~/.virt-manager/virt-manager.log > > > virsh --connect xen:/// capabilities > > > virsh --connect xen:/// version > > > > > > Thanks, > > > Cole > > > > > -------------------------------------------------------------------------- > > > > Yahoo! India has a new look. [9]Take a sneak peek. > > > > References > > > > Visible links > > 1. file:///mc/compose?to=crobinso@xxxxxxxxxx > > 2. file:///mc/compose?to=crobinso@xxxxxxxxxx > > 3. file:///mc/compose?to=feehapk@xxxxxxxxxxx > > 4. file:///mc/compose?to=virt-tools-list@xxxxxxxxxx > > 5. file:///mc/compose?to=bderzhavets@xxxxxxxxx > > 6. file:///mc/compose?to=james.harper@xxxxxxxxxxxxxxxx > > 7. file:///mc/compose?to=fedora-xen@xxxxxxxxxx > > 8. > http://bderzhavets.wordpress.com/2009/08/20/setup-libvirt-0-7-0-6-xen-3-4-1- > dom0-on-to-fedora-11-64-bit/#comment-623 > > 9. http://in.rd.yahoo.com/tagline_metro_2/*http:/in.yahoo.com/trynew > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@xxxxxxxxxxxxxxxxxxx > > http://lists.xensource.com/xen-devel > -- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
