Hi,
I am working on x86_64 amd opetron cluster which runs fc5. I wanted to install the older version of Xen i.e xen 3.0-testing.hg for academic purposes. I wanted to compile the xen kernel with debug info. Hence I tried to compile it from source. It compiled successfully and I made corresponding entries to the grub.conf file. Is there any rpm package for xen with debug info available on fc5 for x86_64 ?Please let me know. For now directly compiling from the source gives the following error:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /xen-3.0.2-3.gz console=com2,vga com2=19200,8n1 sync_console
[Multiboot-elf, <0x100000:0xed530:0x39ad0>, shtab=0x227078, entry=0x100000] [0H0000] [06;00 __ __ _____ ___ ____ _____
.
.
.
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).
kernel direct mapping tables up to f087e000 @ ea2000-ea2000
Bootdata ok (command line is ro root=LABEL=/ console=ttyS1,19200n8 3 selinux=0)
Linux version 2.6.16.13-xen (root@opt13) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 SMP Thu Nov 20 21:45:06 EST 2008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfebff000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xfebff000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xfebfe000] gsi_base[28])
IOAPIC[2]: apic_id 6, version 17, address 0xfebfe000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at fc400000 (gap: fc000000:3780000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ console=ttyS1,19200n8 3 selinux=0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
Xen reported: 1793.340 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff8800058d1000 - 0xffff8800098d1000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3783548k/3940856k available (2415k kernel code, 148460k reserved, 904k data, 164k init)
Calibrating delay using timer specific routine.. 3588.10 BogoMIPS (lpj=17940514)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
Initializing CPU#3
migration_cost=309
checking if image is initramfs... it is
Freeing initrd memory: 2177k freed
DMI 2.3 present.
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:06.0
IO window: 9000-bfff
MEM window: fc900000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: fc800000-fc8fffff
PREFETCH window: ff500000-ff5fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: MSI quirk detected. pci_msi_quirk set.
PCI: MSI quirk detected. pci_msi_quirk set.
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
blkif_init: reqs=64, pages=704, mmap_vstart=0xffff8800ef800000
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hdc: SR244W, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbmon: debugfs is not available
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Red Hat nash version 5.0.32 startinginput: AT Translated Set 2 keyboard as /class/input/input0
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading sata_sil.ko module
GSI 16 sharing vector 0x98 and IRQ 16
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 16
ata1: SATA max UDMA/100 cmd 0xFFFFC20000004C80 ctl 0xFFFFC20000004C8A bmdma 0xFFFFC20000004C00 irq 16
ata2: SATA max UDMA/100 cmd 0xFFFFC20000004CC0 ctl 0xFFFFC20000004CCA bmdma 0xFFFFC20000004C08 irq 16
ata3: SATA max UDMA/100 cmd 0xFFFFC20000004E80 ctl 0xFFFFC20000004E8A bmdma 0xFFFFC20000004E00 irq 16
ata4: SATA max UDMA/100 cmd 0xFFFFC20000004EC0 ctl 0xFFFFC20000004ECA bmdma 0xFFFFC20000004E08 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: SATA link down (SStatus 0)
scsi1 : sata_sil
ata3: SATA link down (SStatus 0)
scsi2 : sata_sil
ata4: SATA link down (SStatus 0)
scsi3 : sata_sil
Vendor: ATA Model: WDC WD800JD-22LS Rev: 06.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
Loading jbd.ko module
Loading ext3.ko module
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to Fedora Core
Press 'I' to enter interactive startup.
Setting clock (localtime): Thu Nov 27 22:38:38 EST 2008 [ OK ]
Starting udev: general protection fault: 0000 [1] SMP
CPU 1
Modules linked in: tg3 i2c_core ext3 jbd sata_sil
Pid: 457, comm: modprobe Not tainted 2.6.16.13-xen #1
RIP: e030:[<ffffffff801c4332>] <ffffffff801c4332>{create_dir+34}
RSP: e02b:ffff8800ef3cfc28 EFLAGS: 00010296
RAX: ffffffff88039010 RBX: ffff8800efd12400 RCX: ffff8800ef3cfc60
RDX: ffff8800efd12400 RSI: 90666690666666c3 RDI: ffff8800efd123f8
RBP: ffff8800efd123f8 R08: 00000000fffffffe R09: ffff8800eff2b889
R10: ffff8800efd12000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8800efd123e8 R14: ffffffff88039010 R15: ffffffff804049e0
FS: 00002b49a3774210(0000) GS:ffffffff804a9080(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000
Process modprobe (pid: 457, threadinfo ffff8800ef3ce000, task ffff8800efcc09b0)
Stack: ffff8800efd123f8 ffff8800efd123e8 0000000000000000 ffff8800efd123e8
ffffffff88039010 ffffffff801c4b28 ffffffff88039010 0000000000000000
ffff8800efd123f8 ffffffff801f52ea
Call Trace: <ffffffff88039010>{:tg3:tg3_disable_ints+0}
<ffffffff801c4b28>{sysfs_create_dir+88} <ffffffff88039010>{:tg3:tg3_disable_ints+0}
<ffffffff801f52ea>{kobject_add+234} <ffffffff88039000>{:tg3:tg3_write32+0}
<ffffffff80251cf9>{class_device_add+185} <ffffffff802f72d1>{netdev_register_sysfs+81}
<ffffffff802ed2d2>{netdev_run_todo+242} <ffffffff802ec634>{register_netdev+100}
<ffffffff88044b07>{:tg3:tg3_init_one+3175} <ffffffff801297f3>{__wake_up+67}
<ffffffff80204269>{pci_device_probe+89} <ffffffff80250d75>{driver_probe_device+101}
<ffffffff80250e50>{__driver_attach+0} <ffffffff80250eb0>{__driver_attach+96}
<ffffffff80250e50>{__driver_attach+0} <ffffffff80250619>{bus_for_each_dev+73}
<ffffffff802501f8>{bus_add_driver+136} <ffffffff802044d0>{__pci_register_driver+128}
<ffffffff8014fdd2>{sys_init_module+258} <ffffffff8010b2fe>{system_call+134}
<ffffffff8010b278>{system_call+0}
Code: 48 8b 7e 10 49 89 cc 49 89 f6 48 81 c7 c0 00 00 00 e8 88 33
RIP <ffffffff801c4332>{create_dir+34} RSP <ffff8800ef3cfc28>
udevd-event[456]: run_program: '/sbin/modprobe' abnormal exit
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@xxxxxxxxxxxxx> and others
sd 0:0:0:0: Attached scsi generic sg0 type 0
Unable to handle kernel paging request at ffffffff8807c000 RIP:
Please let me know if I have apply any FC5 related patches to the xen source.
Please help.
Thanks,
Aditya
Graduate student
princeofporsche@xxxxxxxxx
-- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
