It's referenced in the quickstart
http://fedoraproject.org/wiki/FedoraXenQuickstartFC6
On Tue, 2007-03-27 at 17:27 -0600, Lamont Peterson wrote:
On Tuesday 27 March 2007 03:58pm, Andrew Cathrow wrote: > Run kpartx to create the devices - will be created in /dev/mapper Hmm. I'd run into something that mentioned the use of kpartx (I think is was in some openSUSE 10.2 Xen documentation), but looking at it's man page, it didn't look like the right tool to create the devices. > kpartx -a /dev/loop0 So, I'm supposed to: 1. Create the image file. 2. Run "losetup /dev/loop0 /whatever/path/to/the/imagefile" 3. Run "fdisk /dev/loop0" to create the partitions. 4. Run "kpartx -a /dev/loop0" which will create /dev/mapper/* devices for the partitions on /dev/loop0. Have I got that right? > On Tue, 2007-03-27 at 15:32 -0600, Lamont Peterson wrote: > > All, > > > > I need to create some images that pygrub can boot (on FC6 & RHEL5). > > IIUC, that means that the image file must be a disk image complete with > > partition table. > > > > The trouble I'm running into is figuring out how to access the > > "partition" within the disk image file as a block device. This is > > necessary in order to format or mount the filesystems and run mkswap for > > the disk image's swap partition. > > > > Here's what I have so far. > > > > 1. Create the disk image file, ala "dd if=/dev/zero > > of=/var/lib/xen/images/someVM/sda bs=1k seek=4608k count=1" > > > > 2. Create partitions with fdisk (this requires setting the number of > > cylinders, but that's easy). > > > > 3. losetup /dev/loop0 /var/lib/xen/images/someVM/sda > > > > At this point, I can run "fdisk -l /dev/loop0" and get: > > > > Disk /dev/loop0: 4831 MB, 4831839232 bytes > > 255 heads, 63 sectors/track, 587 cylinders > > Units = cylinders of 16065 * 512 = 8225280 bytes > > > > Device Boot Start End Blocks Id System > > /dev/loop0p1 1 523 4200966 83 Linux > > /dev/loop0p2 524 588 522112+ 82 Linux swap / > > Solaris > > > > However, there is no /dev/loop0p1 or /dev/loop0p2 devices and I'm not > > sure what to do to make those accessible. I need to be able > > to "mke2fs -j /dev/loop0p1" and "mkswap /dev/loop0p2" or equivalent. > > Then I need to mount /dev/loop0p1 to copy files to it. > > > > How can I access partitions inside a disk image as block devices? Should > > I be using something other than losetup here? > > -- > > Fedora-xen mailing list > > Fedora-xen@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/fedora-xen -- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
|
Andrew Cathrow Red Hat, Inc. (678) 733 0452 - Mobile (404) 437 6178 - Home Office acathrow@xxxxxxxxxx |
-- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
