Hi all!
At first I have to admit that I am very inexperienced in using XEN!
What I try to do is get OpenSuse 10.2 working on my FC6 Station.
To do that I did the following steps:
1)Installed the XEN Kernel: 2.6.19-1.2911.fc6xen
2)Installed OpenSuse 10.2 on my girlfriends Laptop
3)made a complete image of the installation and put it in my home:
/home/user/opensuse102xen.img
4)created an suse.xen.cfg:
kernel = "/boot/vmlinuz-2.6.19-1.2895.fc6xen"
memory = 512
name = "opensuse102"
vif = ['']
#nics = 1
#dhcp = "dhcp"
disk = disk = ['file:/home/rehcla/opensuse102xen.img,xvda,w']
root = "/dev/xvda ro"
5)did edit the /etc/fstab in the Image:
/dev/xvda / ext3 acl,user_xattr
1 1
#/dev/hda1 /windows/C ntfs
ro,users,gid=users,umask=0002,nls=utf8 0 0
#/dev/hda2 swap swap defaults
0 0
proc /proc proc defaults
0 0
sysfs /sys sysfs noauto
0 0
debugfs /sys/kernel/debug debugfs noauto
0 0
usbfs /proc/bus/usb usbfs noauto
0 0
devpts /dev/pts devpts mode=0620,gid=5
0 0
When I try to start Xen with:
"xm create opensuse102 -c suse.xen.cfg"
I get this:
Using config file "./suse.xen.cfg".
Started domain opensuse102
Linux version 2.6.19-1.2895.fc6xen
(brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105
(Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:47:12 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e0000 soft=c07c0000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.494 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 512768k/532480k available (2166k kernel code, 11200k reserved,
1100k data, 184k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc078e000 - 0xc07bc000 ( 184 kB)
.data : 0xc061da2c - 0xc0730bf4 (1100 kB)
.text : 0xc0400000 - 0xc061da2c (2166 kB)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 8489.82 BogoMIPS
(lpj=16979653)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1172096781.555:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key A803A00FB8A89D68
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.19-1.2895.fc6xen
(brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105
(Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:47:12 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e0000 soft=c07c0000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.494 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 512768k/532480k available (2166k kernel code, 11200k reserved,
1100k data, 184k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc078e000 - 0xc07bc000 ( 184 kB)
.data : 0xc061da2c - 0xc0730bf4 (1100 kB)
.text : 0xc0400000 - 0xc061da2c (2166 kB)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay using timer specific routine.. 8489.82 BogoMIPS
(lpj=16979653)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1172096781.555:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key A803A00FB8A89D68
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "xvda" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Can some help me?
Thanks!
Claus Reheis
Attachment:
signature.asc
Description: This is a digitally signed message part
-- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
