----- Original Message -----
Sent: Sunday, February 18, 2007 10:14
PM
Subject: Problems with
starting xen guest (DomU)
Hello All,
My XEN guest was not starting. It stopped
after " ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx "...
Do you know what is going on ?
Thanks,
Eduardo
Started domain fedora.fc6
Linux version 2.6.19-1.2895.fc6xen (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.1.1 20070105 (Red
Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:47:12
EST 2007
BIOS-provided
physical RAM map:
Xen:
0000000000000000 - 0000000008800000 (usable)
0MB HIGHMEM available.
136MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0
-> 34816
Normal 34816
-> 34816
HighMem 34816 ->
34816
early_node_map[1] active PFN
ranges
0: 0 -> 34816
ACPI in unprivileged domain
disabled
Built 1 zonelists.
Total pages: 34544
Kernel command
line: root=/dev/hda2 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support...
done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e0000
soft=c07c0000
PID hash table
entries: 1024 (order: 10, 4096 bytes)
Xen reported: 1808.801 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5,
131072 bytes)
Inode-cache hash
table entries: 16384 (order: 4, 65536 bytes)
Software IO TLB disabled
vmalloc area: c9000000-f4ffe000, maxmem 2d7fe000
Memory: 124568k/139264k available
(2166k kernel code, 6360k reserved, 1100k
data, 184k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000
(5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc :
0xc9000000 - 0xf4ffe000 ( 703 MB)
lowmem : 0xc0000000 -
0xc8800000 ( 136 MB)
.init : 0xc078e000 -
0xc07bc000 ( 184 kB)
.data : 0xc061da2c -
0xc0730bf4 (1100 kB)
.text : 0xc0400000 -
0xc061da2c (2166 kB)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using
timer specific routine.. 4528.74 BogoMIPS
(lpj=9057489)
Security
Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering
secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 bytes/line)
CPU: L2 Cache: 128K
(64 bytes/line)
Checking 'hlt'
instruction... OK.
SMP
alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant
table initialized
NET: Registered
protocol family 16
Brought up 1
CPUs
PCI: Fatal: No config space
access function found
PCI: setting
up Xen PCI frontend stub
ACPI:
Interpreter disabled.
Linux Plug
and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface
driver hub
usbcore: registered new
device driver usb
PCI: System does
not support PCI
PCI: System does
not support PCI
NetLabel:
Initializing
NetLabel: domain
hash size = 128
NetLabel:
protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1,
8192 bytes)
TCP established hash
table entries: 8192 (order: 5, 163840 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920
bytes)
TCP: Hash tables configured
(established 8192 bind 4096)
TCP
reno registered
IA-32 Microcode
Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1171762557.754:1):
initialized
VFS: Disk quotas
dquot_6.5.1
Dquot-cache hash table
entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key A803A00FB8A89D68
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
(default)
pci_hotplug: PCI Hot Plug
PCI Core version: 0.5
rtc: IRQ 8 is
not free.
Non-volatile memory
driver v1.2
Linux agpgart interface
v0.101 (c) Dave Jones
RAMDISK
driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully
installed as xvc0
Linux version
2.6.19-1.2895.fc6xen (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 4.1.1 20070105 (Red
Hat 4.1.1-51)) #1 SMP Wed Jan 10 19:47:12
EST 2007
BIOS-provided
physical RAM map:
Xen:
0000000000000000 - 0000000008800000 (usable)
0MB HIGHMEM available.
136MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0
-> 34816
Normal 34816
-> 34816
HighMem 34816 ->
34816
early_node_map[1] active PFN
ranges
0: 0 -> 34816
ACPI in unprivileged domain
disabled
Built 1 zonelists.
Total pages: 34544
Kernel command
line: root=/dev/hda2 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support...
done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e0000
soft=c07c0000
PID hash table
entries: 1024 (order: 10, 4096 bytes)
Xen reported: 1808.801 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5,
131072 bytes)
Inode-cache hash
table entries: 16384 (order: 4, 65536 bytes)
Software IO TLB disabled
vmalloc area: c9000000-f4ffe000, maxmem 2d7fe000
Memory: 124568k/139264k available
(2166k kernel code, 6360k reserved, 1100k
data, 184k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000
(5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc :
0xc9000000 - 0xf4ffe000 ( 703 MB)
lowmem : 0xc0000000 -
0xc8800000 ( 136 MB)
.init : 0xc078e000 -
0xc07bc000 ( 184 kB)
.data : 0xc061da2c -
0xc0730bf4 (1100 kB)
.text : 0xc0400000 -
0xc061da2c (2166 kB)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using
timer specific routine.. 4528.74 BogoMIPS
(lpj=9057489)
Security
Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering
secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 bytes/line)
CPU: L2 Cache: 128K
(64 bytes/line)
Checking 'hlt'
instruction... OK.
SMP
alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant
table initialized
NET: Registered
protocol family 16
Brought up 1
CPUs
PCI: Fatal: No config space
access function found
PCI: setting
up Xen PCI frontend stub
ACPI:
Interpreter disabled.
Linux Plug
and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface
driver hub
usbcore: registered new
device driver usb
PCI: System does
not support PCI
PCI: System does
not support PCI
NetLabel:
Initializing
NetLabel: domain
hash size = 128
NetLabel:
protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1,
8192 bytes)
TCP established hash
table entries: 8192 (order: 5, 163840 bytes)
TCP bind hash table entries: 4096 (order: 4, 81920
bytes)
TCP: Hash tables configured
(established 8192 bind 4096)
TCP
reno registered
IA-32 Microcode
Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1171762557.754:1):
initialized
VFS: Disk quotas
dquot_6.5.1
Dquot-cache hash table
entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key A803A00FB8A89D68
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
(default)
pci_hotplug: PCI Hot Plug
PCI Core version: 0.5
rtc: IRQ 8 is
not free.
Non-volatile memory
driver v1.2
Linux agpgart interface
v0.101 (c) Dave Jones
RAMDISK
driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully
installed as xvc0
Event-channel
device installed.
Uniform
Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes;
override with idebus=xx
--
Fedora-xen mailing
list
Fedora-xen@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/fedora-xen
