On Thu, 2007-01-04 at 12:39 +0100, Andre Vehreschild wrote: > Hi, > > I installed the current xen-kernel on a FC6 and tried to boot it on my Intel > Core 2 Duo. Everthing seems fine until the system tries to start the > printer-service cups for a locally connect parallel port printer. It simply > hangs forever. After a reboot, I checked if the non xen-kernel is able to > boot: It is. Next I went into the interactive mode, when rebooting into xen. > I neglected the start of cups and the system continued to start up upto the > yum-updatesd. Then hanging again. > > Do I miss something? Do have to configure something before I am able to > install the rpms as provided by Fedora? > > I use Fedora Core 6 with the most recent updates kernel-xen-2.6.18-1.2869.fc6 > on an Intel Core 2 Duo E6600 1GB Ram on a Gigabyte 965G Board. I saw something similar a while back and opened Red Hat bug 151491: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=151491 which led to Xen bug 13: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=13 The resolution for me was getting ACPI support into the Xen kernels. FC6 + Xen works fine on the same hardware. Keith. -- Fedora-xen mailing list Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
