Hello All,
I'm using FC5 with the following
setup:
2.6.16-1.2080_FC5xen0
xen-3.0.1-4
I have a dual homed system,
and would like all virtual eth0 nics
to utilize the real physical eth0 nic, and would like all virtual eth1 nics to
use the real physical eth1 nic.
as of now I have
this:
in my
/etc/xen/host1
vif = [ 'mac=0a:00:00:00:00:01',
'mac=0b:00:00:00:00:01']
'mac=0b:00:00:00:00:01']
in my
/etc/xen/xend-config.sxp
(network-script
'network-bridge bridge=br0 netdev=eth0')
(network-script 'network-bridge bridge=br1 netdev=eth1')
(network-script 'network-bridge bridge=br1 netdev=eth1')
brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no peth0
vif0.0
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no peth0
vif0.0
brctl
addbr xenbr1
brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no peth0
vif0.0
xenbr1 8000.000000000000 no can't get port info: Function not implemented
brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no peth0
vif0.0
xenbr1 8000.000000000000 no can't get port info: Function not implemented
On the virtual host i ssh in through the virtual
eth0 interface successfully, then when i issue a tcpdump on the virtual eth1 i see
real traffic for the real physical eth1, however when assigning an address on
the virtual eth1, i can not
access it from outside the virtual
environment.
Any direction
to specific setup docs or any advice would be greatly appreciated!
Thanks,
-Alex
*****************************************************************
<<
In compliance with applicable rules and regulations, Instinet
reviews and archives incoming and outgoing email communications,
copies of which may be produced at the request of regulators.
This message is intended only for the personal and confidential
use of the recipients named above. If the reader of this email
is not the intended recipient, you have received this email in
error and any review, dissemination, distribution or copying is
strictly prohibited. If you have received this email in error,
please notify the sender immediately by return email and
permanently delete the copy you received.
Instinet accepts no liability for any content contained in the
email, or any errors or omissions arising as a result of email
transmission. Any opinions contained in this email constitute
the sender's best judgment at this time and are subject to change
without notice. Instinet does not make recommendations of a
particular security and the information contained in this email
should not be considered as a recommendation, an offer or a
solicitation of an offer to buy and sell securities.
*****************************************************************
