Start the domain and create a /etc/sysconfig/networking/devices/ifcfg-eth0 file with the following in it. (works for me!) This is on FC4 Zen 3.01 DEVICE=eth0 BROADCAST=192.168.1.255 HWADDR=aa:bb:00:00:00:12 IPADDR=192.168.1.110 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes TYPE=Ethernet GATEWAY=192.168.1.1 BOOTPROTO=none USERCTL=no PEERDNS=yes IPV6INIT=no Todd H Foster, CEO Technetium, Inc. The Technical Element. One Ten Pine Avenue Suite 1080 Long Beach, CA 90802 ---------------------------- Phone: (310) 508-6476 Fax: (562) 427-4707 Email: toddf@xxxxxxxxxxxxxxxxx Web: www.technetiuminc.com -----Original Message----- From: fedora-xen-bounces@xxxxxxxxxx [mailto:fedora-xen-bounces@xxxxxxxxxx] On Behalf Of Mark Ryden Sent: Thursday, March 16, 2006 2:15 AM To: fedora-xen@xxxxxxxxxx Subject: [Fedora-xen] setting IP address for domU in a config file Hello, I had followed the instructions in http://www.fedoraproject.org/wiki/FedoraXenQuickstart an I am succeeding in creating domain U. The thing is that I want domU to start with some static IP address. How can I do it ? I had tried adding , in the config file for domU, vif = [ 'ip=192.168.0.193', 'bridge=xenbr0' ] netmask="255.255.255.0" and run "xm create -c domUconfig" Dom U started , ifconfig -a showed eth0, but without the IP address. Any ideas ? Mark -- Fedora-xen@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/fedora-xen
