On 2/20/06, Stephen C. Tweedie <sct@xxxxxxxxxx> wrote:
Hi,
On Sun, 2006-02-19 at 08:18 -0600, Justin Conover wrote:
> md: running: <sdd1><sdc1><sdb1><sda1>
> md: personality for level 5 is not loaded!
> md: do_md_run() returned -22
> md: md2 stopped.
This is likely to be the problem!
If you boot to single-user mode and manually "modprobe raid5" to load
the raid5 personality, can you see the array?
--Stephen
Adding init=1 to the xen/kernel line only allows it to go so far before it just reboots it self, not far enough for me to even hit I or do anything else.
If I comment out the raid5 /dev/md2 /home in /etc/fstab the xen kernel boots
lsmod | grep raid
raid1 24769 2
# modprobe raid5
FATAL: Error inserting raid5 (/lib/modules/2.6.15-1.1955_FC5hypervisor/kernel/drivers/md/raid5.ko): Unknown symbol in module, or unknown parameter (see dmesg)
# dmesg | grep raid5
raid5: automatically using best checksumming function: pIII_sse
raid5: Unknown symbol xor_block
raid5: Unknown symbol xor_block
raid5: Unknown symbol xor_block
Should I report a bug on this?
