Jan 6 18:54:20 xen net.agent[8922]: remove event not handled
Jan 6 18:54:36 xen hald[4869]: Timed out waiting for hotplug event 1148. Rebasing to 1149
Jan 6 18:54:37 xen hal.hotplug[9720]: timout(10000 ms) waiting for /class/net/vif3.0
This is the third time a domU has been booted on this machine so i can understand the vif3.0, however i have put a custom name for the vifname as vm01.
ifconfig from dom0
eth0 Link encap:Ethernet HWaddr 00:08:A1:50:FA:19
inet addr:192.168.1.250 Bcast:192.168.1.255 Mask: 255.255.255.0
inet6 addr: fe80::208:a1ff:fe50:fa19/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7828 errors:0 dropped:0 overruns:0 frame:0
TX packets:6329 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3537327 (3.3 MiB) TX bytes:835757 (816.1 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:76 (76.0 b) TX bytes:76 (76.0 b)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:7811 errors:0 dropped:0 overruns:0 frame:0
TX packets:6449 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3548430 (3.3 MiB) TX bytes:859382 (839.2 KiB)
Interrupt:16 Base address:0xa000
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6332 errors:0 dropped:0 overruns:0 frame:0
TX packets:7830 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:837371 (817.7 KiB) TX bytes:3537471 (3.3 MiB)
vm01 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:55 errors:0 dropped:14 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:762 (762.0 b) TX bytes:11140 (10.8 KiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:341 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:31190 (30.4 KiB) TX bytes:378 ( 378.0 b)
ifconfig from inside domU
eth0 Link encap:Ethernet HWaddr AA:00:00:18:98:FB
inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a800:ff:fe18:98fb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:56 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11226 (10.9 KiB) TX bytes:762 (762.0 b)
lo Link encap:Local Loopback
inet addr: 127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Any help would be appreciated.
On 1/5/06, Leonardo Pinto <listas@xxxxxxxxxxxxxxxx> wrote:
Here everything functioned well. I applied the patches in the hand in
following the files of the FC4:
"/etc/xen/scripts/vif-common.sh" and
"/usr/lib/python/xen/xend/server/netif.py"
Remaining only obviously the last adjustment in the configuration file of
the virtual machine:
"vif = [ ' mac=aa:00:00:00:00:11, bridge=isp0, vifname=isp0.0 ' ]"
Special thanks for "PAINCHAUD Christophe".
--
Leonardo Pinto
listas#openlogic dot com br
> I tried to apply it to the 2 files vif-common.sh and netif.py however the
vifnames specified inside the config don't work. Any ideas ?On 1/5/06,
PAINCHAUD Christophe
>
>
> <cpainchaud@xxxxxxxxxxx> wrote:
> A dev just pointed me this link :
>
http://xenbits.xensource.com/xen-unstable.hg?cmd=changeset;node=95f84e37c90d573dd01cc29db5b81ffb5f86f84a
>
> Regards...
>
> Christophe PAINCHAUD
>
>
> Somebody could answer me if is possible to modify the standard of the name
> of the virtual interfaces vifX.X? And where I can make these alterations
for
> my proper personalizations?
>
> Thankful,
> --
> Leonardo Pinto
________________________________________________
Mensagem enviada usando OpenLogic WebMail 2.7.2
--
regards,
Anand
