On 12/02/2010 08:39 AM, Jurgen Kramer wrote:
On Sat, 2010-11-27 at 07:54 -0500, Jan Wildeboer wrote:
Will try this evening and report here! BTW - are you using nouveau or
(a)kmod-nvidia?
Jan
Does sound work with my latest kernel?
Nope. See attached dmesg for clues (I cannot see sth obvious).
I tried alsamixer and put everything on 100% levels, I switched between
stereo duplex and stereo output in sound preferences, no luck :-(
Jan
--
Jan H Wildeboer |
EMEA Open Source Affairs | Office: +49 (0)89 205071-207
Red Hat GmbH | Mobile: +49 (0)174 33 23 249
Technopark II, Haus C | Fax: +49 (0)89 205071-111
Werner-von-Siemens-Ring 11 -15 |
85630 Grasbrunn |
_____________________________________________________________________
Reg. Adresse: Red Hat GmbH,
Technopark II, Haus C, Werner-von-Siemens-Ring 11 -15
85630 Grasbrunn, Handelsregister: Amtsgericht Muenchen HRB 153243
Geschaeftsfuehrer: Brendan Lane, Charlie Peters, Michael Cunningham,
Charles Cachera
_____________________________________________________________________
GPG Key: 3AC3C8AB
Fingerprint: 3D1E C4E0 DD67 E16D E47A 9564 A72F 5C39 3AC3 C8AB
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.6-48.mbajk6.fc14.x86_64 (kramer@xxxxxxxxxx) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Sat Nov 27 12:40:07 CET 2010
[ 0.000000] Command line: ro root=/dev/mapper/vg_mba31-lv_root rd_LVM_LV=vg_mba31/lv_root rd_LVM_LV=vg_mba31/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de nomodeset rhgb quiet reboot=pci
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000af000000 (usable)
[ 0.000000] BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf000000 - 00000000bf719000 (usable)
[ 0.000000] BIOS-e820: 00000000bf719000 - 00000000bf939000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf939000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d3200000 - 00000000d3201000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf719 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf719000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf719000 page 4k
[ 0.000000] kernel direct mapping tables up to bf719000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] RAMDISK: 3737f000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 00000000bf96a1c0 0008C (v01 APPLE Apple00 00000061 01000013)
[ 0.000000] ACPI: FACP 00000000bf968000 000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.000000] ACPI: DSDT 00000000bf95b000 0572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bf71e000 00040
[ 0.000000] ACPI: HPET 00000000bf967000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf966000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 00000000bf965000 00068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 00000000bf963000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 00000000bf962000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 00000000bf961000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf957000 00024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf955000 0008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf954000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: MCFG 00000000bf964000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 00000000bf95a000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bf959000 00074 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100013fff]
[ 0.000000] bootmap [0000000100014000 - 000000010003bfff] pages 28
[ 0.000000] (10/32 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0001000000 - 0001e42878] TEXT DATA BSS ==> [0001000000 - 0001e42878]
[ 0.000000] #1 [003737f000 - 0037ff0000] RAMDISK ==> [003737f000 - 0037ff0000]
[ 0.000000] #2 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #3 [0001e43000 - 0001e43219] BRK ==> [0001e43000 - 0001e43219]
[ 0.000000] #4 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
[ 0.000000] #5 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] #8 [0100000000 - 0100014000] NODE_DATA ==> [0100000000 - 0100014000]
[ 0.000000] #9 [0100014000 - 010003c000] BOOTMAP ==> [0100014000 - 010003c000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100600000-ffff880103dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000af000
[ 0.000000] 0: 0x000bf000 -> 0x000bf719
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 980662
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 700241 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[ 0.000000] PM: Registered nosave memory: 00000000bf719000 - 00000000bf939000
[ 0.000000] PM: Registered nosave memory: 00000000bf939000 - 00000000bfef9000
[ 0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
[ 0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3200000
[ 0.000000] PM: Registered nosave memory: 00000000d3200000 - 00000000d3201000
[ 0.000000] PM: Registered nosave memory: 00000000d3201000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d3201000 (gap: d3201000:1cdff000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90496 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s90496 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962636
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ro root=/dev/mapper/vg_mba31-lv_root rd_LVM_LV=vg_mba31/lv_root rd_LVM_LV=vg_mba31/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de nomodeset rhgb quiet reboot=pci
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3771276k/5242880k available (4548k kernel code, 1320232k absent, 151372k reserved, 7261k data, 944k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1397.298 MHz processor.
[ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.59 BogoMIPS (lpj=1397298)
[ 0.001020] pid_max: default: 32768 minimum: 301
[ 0.001063] Security Framework initialized
[ 0.001076] SELinux: Initializing.
[ 0.001090] SELinux: Starting in permissive mode
[ 0.002903] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005792] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007050] Mount-cache hash table entries: 256
[ 0.007290] Initializing cgroup subsys ns
[ 0.007298] Initializing cgroup subsys cpuacct
[ 0.007305] Initializing cgroup subsys memory
[ 0.007328] Initializing cgroup subsys devices
[ 0.007332] Initializing cgroup subsys freezer
[ 0.007336] Initializing cgroup subsys net_cls
[ 0.007340] Initializing cgroup subsys blkio
[ 0.007401] CPU: Physical Processor ID: 0
[ 0.007404] CPU: Processor Core ID: 0
[ 0.007408] mce: CPU supports 6 MCE banks
[ 0.007420] CPU0: Thermal monitoring enabled (TM2)
[ 0.007427] using mwait in idle threads.
[ 0.007430] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.007442] ... version: 2
[ 0.007445] ... bit width: 40
[ 0.007447] ... generic registers: 2
[ 0.007450] ... value mask: 000000ffffffffff
[ 0.007453] ... max period: 000000007fffffff
[ 0.007456] ... fixed-purpose events: 3
[ 0.007459] ... event mask: 0000000700000003
[ 0.008230] ACPI: Core revision 20100428
[ 0.022458] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.022466] ftrace: allocating 23839 entries in 94 pages
[ 0.023080] Setting APIC routing to flat
[ 0.023498] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.033997] CPU0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz stepping 0a
[ 0.034999] Booting Node 0, Processors #1 Ok.
[ 0.106022] Brought up 2 CPUs
[ 0.106027] Total of 2 processors activated (5588.80 BogoMIPS).
[ 0.107010] sizeof(vma)=184 bytes
[ 0.107012] sizeof(page)=56 bytes
[ 0.107015] sizeof(inode)=584 bytes
[ 0.107017] sizeof(dentry)=192 bytes
[ 0.107019] sizeof(ext3inode)=800 bytes
[ 0.107022] sizeof(buffer_head)=104 bytes
[ 0.107024] sizeof(skbuff)=240 bytes
[ 0.107026] sizeof(task_struct)=5944 bytes
[ 0.107116] devtmpfs: initialized
[ 0.116255] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.116314] Time: 14:32:00 Date: 12/02/10
[ 0.116379] NET: Registered protocol family 16
[ 0.116546] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116550] ACPI: bus type pci registered
[ 0.116906] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.116913] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in E820
[ 0.117594] PCI: Using configuration type 1 for base access
[ 0.119328] bio: create slab <bio-0> at 0
[ 0.122209] ACPI: EC: EC description table is found, configuring boot EC
[ 0.134284] ACPI: BIOS _OSI(Linux) query ignored
[ 0.135826] ACPI: SSDT 00000000bf71dc98 001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.136507] ACPI: Dynamic OEM Table Load:
[ 0.136512] ACPI: SSDT (null) 001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.136938] ACPI: SSDT 00000000bf71c618 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.137592] ACPI: Dynamic OEM Table Load:
[ 0.137597] ACPI: SSDT (null) 005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.138256] ACPI: SSDT 00000000bf71df18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.138917] ACPI: Dynamic OEM Table Load:
[ 0.138922] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.139159] ACPI: SSDT 00000000bf71bf18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.139805] ACPI: Dynamic OEM Table Load:
[ 0.139810] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.139971] ACPI: Interpreter enabled
[ 0.139975] ACPI: (supports S0 S3 S4 S5)
[ 0.140018] ACPI: Using IOAPIC for interrupt routing
[ 0.195528] ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
[ 0.195979] ACPI: No dock devices found.
[ 0.195985] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.196439] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.196792] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.196796] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.196801] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.196805] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.196809] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.196813] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.196817] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.196821] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.196825] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.196829] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.196833] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.196837] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.196841] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.196845] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
[ 0.196849] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
[ 0.196853] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
[ 0.196858] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.197851] pci 0000:00:03.0: reg 10: [io 0x2100-0x21ff]
[ 0.197975] pci 0000:00:03.2: reg 10: [io 0x0000-0x00ff]
[ 0.197994] pci 0000:00:03.2: reg 20: [io 0x2240-0x227f]
[ 0.198007] pci 0000:00:03.2: reg 24: [io 0x2200-0x223f]
[ 0.198037] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.198045] pci 0000:00:03.2: PME# disabled
[ 0.198228] pci 0000:00:03.4: reg 10: [mem 0xd3200000-0xd327ffff]
[ 0.198347] pci 0000:00:04.0: reg 10: [mem 0xd328a000-0xd328afff]
[ 0.198389] pci 0000:00:04.0: supports D1 D2
[ 0.198393] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198398] pci 0000:00:04.0: PME# disabled
[ 0.198431] pci 0000:00:04.1: reg 10: [mem 0xd328b100-0xd328b1ff]
[ 0.198480] pci 0000:00:04.1: supports D1 D2
[ 0.198483] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198488] pci 0000:00:04.1: PME# disabled
[ 0.198530] pci 0000:00:06.0: reg 10: [mem 0xd3289000-0xd3289fff]
[ 0.198572] pci 0000:00:06.0: supports D1 D2
[ 0.198575] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198580] pci 0000:00:06.0: PME# disabled
[ 0.198613] pci 0000:00:06.1: reg 10: [mem 0xd328b000-0xd328b0ff]
[ 0.198663] pci 0000:00:06.1: supports D1 D2
[ 0.198666] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.198671] pci 0000:00:06.1: PME# disabled
[ 0.198721] pci 0000:00:08.0: reg 10: [mem 0xd3280000-0xd3283fff]
[ 0.198771] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.198776] pci 0000:00:08.0: PME# disabled
[ 0.198814] pci 0000:00:0a.0: reg 10: [io 0x2298-0x229f]
[ 0.198820] pci 0000:00:0a.0: reg 14: [io 0x22a4-0x22a7]
[ 0.198827] pci 0000:00:0a.0: reg 18: [io 0x2290-0x2297]
[ 0.198834] pci 0000:00:0a.0: reg 1c: [io 0x22a0-0x22a3]
[ 0.198840] pci 0000:00:0a.0: reg 20: [io 0x2280-0x228f]
[ 0.198847] pci 0000:00:0a.0: reg 24: [mem 0xd3284000-0xd3285fff]
[ 0.198907] pci 0000:00:0b.0: reg 10: [mem 0xd3288000-0xd3288fff]
[ 0.199219] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.199229] pci 0000:00:15.0: PME# disabled
[ 0.199335] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.199340] pci 0000:00:17.0: PME# disabled
[ 0.199638] pci 0000:01:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.199711] pci 0000:01:00.0: supports D1 D2
[ 0.199714] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.199721] pci 0000:01:00.0: PME# disabled
[ 0.199750] pci 0000:00:15.0: PCI bridge to [bus 01-01]
[ 0.199768] pci 0000:00:15.0: bridge window [io 0xfffffffffffff000-0x0000] (disabled)
[ 0.199779] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.199797] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.199859] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.199869] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.199880] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.199887] pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
[ 0.199894] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.199954] pci 0000:00:17.0: PCI bridge to [bus 02-02]
[ 0.199960] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.199965] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.199972] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.200008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.200505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.260054] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.260418] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.260779] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.261148] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.261509] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.261870] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.262239] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.262599] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.262958] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.263323] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.263681] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.264050] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.264408] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.264771] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.265139] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.265498] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.265862] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.266235] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.266599] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.266696] HEST: Table is not found!
[ 0.266809] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.266814] vgaarb: loaded
[ 0.266957] SCSI subsystem initialized
[ 0.267024] libata version 3.00 loaded.
[ 0.267098] usbcore: registered new interface driver usbfs
[ 0.267123] usbcore: registered new interface driver hub
[ 0.267131] usbcore: registered new device driver usb
[ 0.267131] PCI: Using ACPI for IRQ routing
[ 0.267131] PCI: pci_cache_line_size set to 64 bytes
[ 0.267282] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.267286] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.267290] reserve RAM buffer: 00000000af000000 - 00000000afffffff
[ 0.267294] reserve RAM buffer: 00000000bf719000 - 00000000bfffffff
[ 0.267436] NetLabel: Initializing
[ 0.267439] NetLabel: domain hash size = 128
[ 0.267441] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.267461] NetLabel: unlabeled traffic allowed by default
[ 0.267558] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.267567] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.267574] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.270029] Switching to clocksource tsc
[ 0.289292] pnp: PnP ACPI init
[ 0.289323] ACPI: bus type pnp registered
[ 0.291272] pnp 00:06: disabling [io 0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291278] pnp 00:06: disabling [io 0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291283] pnp 00:06: disabling [io 0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291288] pnp 00:06: disabling [io 0x0063] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291293] pnp 00:06: disabling [io 0x0065] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291298] pnp 00:06: disabling [io 0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291303] pnp 00:06: disabling [io 0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291308] pnp 00:06: disabling [io 0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291313] pnp 00:06: disabling [io 0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291317] pnp 00:06: disabling [io 0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291322] pnp 00:06: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291327] pnp 00:06: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.291333] pnp 00:06: disabling [io 0x0080] because it overlaps 0000:00:03.2 BAR 0 [io 0x0000-0x00ff]
[ 0.325133] pnp: PnP ACPI: found 8 devices
[ 0.325137] ACPI: ACPI bus type pnp unregistered
[ 0.325156] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.325167] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.325177] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.325181] system 00:06: [io 0x0480-0x04ff] has been reserved
[ 0.325186] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.325190] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.325194] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.325199] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.325204] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.325208] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.332639] pci 0000:00:03.2: BAR 0: assigned [io 0x2000-0x20ff]
[ 0.332647] pci 0000:00:03.2: BAR 0: set to [io 0x2000-0x20ff] (PCI address [0x2000-0x20ff]
[ 0.332652] pci 0000:00:15.0: PCI bridge to [bus 01-01]
[ 0.332655] pci 0000:00:15.0: bridge window [io disabled]
[ 0.332669] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.332679] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.332696] pci 0000:00:17.0: PCI bridge to [bus 02-02]
[ 0.332700] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.332706] pci 0000:00:17.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.332712] pci 0000:00:17.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.332849] pci 0000:00:15.0: power state changed by ACPI to D0
[ 0.332981] pci 0000:00:15.0: power state changed by ACPI to D0
[ 0.333517] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 23
[ 0.333522] alloc irq_desc for 23 on node -1
[ 0.333525] alloc kstat_irqs on node -1
[ 0.333535] pci 0000:00:15.0: PCI INT A -> Link[Z00J] -> GSI 23 (level, low) -> IRQ 23
[ 0.333547] pci 0000:00:15.0: setting latency timer to 64
[ 0.333560] pci 0000:00:17.0: setting latency timer to 64
[ 0.333565] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.333569] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.333573] pci_bus 0000:01: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.333577] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.333581] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.333584] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.333630] NET: Registered protocol family 2
[ 0.333878] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.335974] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.340806] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.341427] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.341431] TCP reno registered
[ 0.341449] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.341507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.341694] NET: Registered protocol family 1
[ 0.352193] pci 0000:02:00.0: Boot video device
[ 0.352199] PCI: CLS 256 bytes, default 64
[ 0.352299] Trying to unpack rootfs image as initramfs...
[ 0.820309] Freeing initrd memory: 12740k freed
[ 0.827497] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.827504] Placing 64MB software IO TLB between ffff88000211e000 - ffff88000611e000
[ 0.827508] software IO TLB at phys 0x211e000 - 0x611e000
[ 0.828371] audit: initializing netlink socket (disabled)
[ 0.828391] type=2000 audit(1291300319.826:1): initialized
[ 0.846386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.848950] VFS: Disk quotas dquot_6.5.2
[ 0.849024] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.849776] msgmni has been set to 7390
[ 0.849874] SELinux: Registering netfilter hooks
[ 0.850317] alg: No test for stdrng (krng)
[ 0.850400] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.850407] io scheduler noop registered
[ 0.850410] io scheduler deadline registered
[ 0.850473] io scheduler cfq registered (default)
[ 0.850750] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.850900] alloc irq_desc for 40 on node -1
[ 0.850903] alloc kstat_irqs on node -1
[ 0.850930] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 0.851144] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.851178] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.851181] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.851876] pci-stub: invalid id string ""
[ 0.851988] intel_idle: MWAIT substates: 0x3122220
[ 0.851991] intel_idle: does not run on family 6 model 23
[ 0.852160] ACPI: AC Adapter [ADP1] (on-line)
[ 0.852299] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.852371] ACPI: Lid Switch [LID0]
[ 0.852446] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.852452] ACPI: Power Button [PWRB]
[ 0.852525] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.852531] ACPI: Sleep Button [SLPB]
[ 0.852623] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.852628] ACPI: Power Button [PWRF]
[ 0.853258] ACPI: acpi_idle registered with cpuidle
[ 0.853525] Monitor-Mwait will be used to enter C-1 state
[ 0.853558] Monitor-Mwait will be used to enter C-2 state
[ 0.853589] Monitor-Mwait will be used to enter C-3 state
[ 0.853597] Marking TSC unstable due to TSC halts in idle
[ 0.853660] Switching to clocksource hpet
[ 0.882270] ERST: Table is not found!
[ 0.882691] Non-volatile memory driver v1.3
[ 0.882695] Linux agpgart interface v0.103
[ 0.882812] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.885100] brd: module loaded
[ 0.886023] loop: module loaded
[ 0.886133] ahci 0000:00:0a.0: version 3.0
[ 0.886231] Fixed MDIO Bus: probed
[ 0.886313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.886590] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[ 0.886720] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[ 0.887241] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.887247] alloc irq_desc for 22 on node -1
[ 0.887250] alloc kstat_irqs on node -1
[ 0.887274] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 0.887302] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.887306] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.887393] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.887433] ehci_hcd 0000:00:04.1: debug port 1
[ 0.908023] ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
[ 0.908051] ehci_hcd 0000:00:04.1: irq 22, io mem 0xd328b100
[ 0.914021] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 0.914054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.914058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.914061] usb usb1: Product: EHCI Host Controller
[ 0.914065] usb usb1: Manufacturer: Linux 2.6.35.6-48.mbajk6.fc14.x86_64 ehci_hcd
[ 0.914068] usb usb1: SerialNumber: 0000:00:04.1
[ 0.914226] hub 1-0:1.0: USB hub found
[ 0.914233] hub 1-0:1.0: 6 ports detected
[ 0.914496] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[ 0.914625] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[ 0.915151] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 21
[ 0.915156] alloc irq_desc for 21 on node -1
[ 0.915159] alloc kstat_irqs on node -1
[ 0.915167] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 21 (level, low) -> IRQ 21
[ 0.915183] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.915187] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.915266] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.915294] ehci_hcd 0000:00:06.1: debug port 1
[ 0.936022] ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
[ 0.936046] ehci_hcd 0000:00:06.1: irq 21, io mem 0xd328b000
[ 0.942021] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 0.942047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.942051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.942054] usb usb2: Product: EHCI Host Controller
[ 0.942057] usb usb2: Manufacturer: Linux 2.6.35.6-48.mbajk6.fc14.x86_64 ehci_hcd
[ 0.942061] usb usb2: SerialNumber: 0000:00:06.1
[ 0.942206] hub 2-0:1.0: USB hub found
[ 0.942212] hub 2-0:1.0: 6 ports detected
[ 0.942344] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.942492] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[ 0.942620] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[ 0.943140] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[ 0.943145] alloc irq_desc for 20 on node -1
[ 0.943148] alloc kstat_irqs on node -1
[ 0.943156] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
[ 0.943173] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.943177] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.943246] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.943290] ohci_hcd 0000:00:04.0: irq 20, io mem 0xd328a000
[ 0.996294] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.996299] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.996303] usb usb3: Product: OHCI Host Controller
[ 0.996306] usb usb3: Manufacturer: Linux 2.6.35.6-48.mbajk6.fc14.x86_64 ohci_hcd
[ 0.996309] usb usb3: SerialNumber: 0000:00:04.0
[ 0.996466] hub 3-0:1.0: USB hub found
[ 0.996474] hub 3-0:1.0: 6 ports detected
[ 0.996708] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[ 0.996836] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[ 0.997453] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 19
[ 0.997458] alloc irq_desc for 19 on node -1
[ 0.997461] alloc kstat_irqs on node -1
[ 0.997468] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 19 (level, low) -> IRQ 19
[ 0.997485] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.997490] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.997552] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.997582] ohci_hcd 0000:00:06.0: irq 19, io mem 0xd3289000
[ 1.050044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.050049] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.050052] usb usb4: Product: OHCI Host Controller
[ 1.050055] usb usb4: Manufacturer: Linux 2.6.35.6-48.mbajk6.fc14.x86_64 ohci_hcd
[ 1.050058] usb usb4: SerialNumber: 0000:00:06.0
[ 1.050211] hub 4-0:1.0: USB hub found
[ 1.050219] hub 4-0:1.0: 6 ports detected
[ 1.050339] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.050427] mice: PS/2 mouse device common for all mice
[ 1.050724] rtc_cmos 00:07: RTC can wake from S4
[ 1.050788] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.050842] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.050941] device-mapper: uevent: version 1.0.3
[ 1.051101] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@xxxxxxxxxx
[ 1.051334] cpuidle: using governor ladder
[ 1.051503] cpuidle: using governor menu
[ 1.051983] usbcore: registered new interface driver hiddev
[ 1.052018] usbcore: registered new interface driver usbhid
[ 1.052021] usbhid: USB HID core driver
[ 1.052053] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.052263] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 1.052267] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 1.052272] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 1.052365] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.052383] TCP cubic registered
[ 1.052386] Initializing XFRM netlink socket
[ 1.052398] NET: Registered protocol family 17
[ 1.052563] PM: Resume from disk failed.
[ 1.052589] registered taskstats version 1
[ 1.052986] Magic number: 6:149:535
[ 1.052996] bdi 1:13: hash matches
[ 1.053155] rtc_cmos 00:07: setting system clock to 2010-12-02 14:32:01 UTC (1291300321)
[ 1.053234] Initalizing network drop monitor service
[ 1.381458] ACPI: Battery Slot [BAT0] (battery present)
[ 1.381523] Freeing unused kernel memory: 944k freed
[ 1.381926] Write protecting the kernel read-only data: 10240k
[ 1.382471] Freeing unused kernel memory: 1576k freed
[ 1.383500] Freeing unused kernel memory: 1836k freed
[ 1.404906] dracut: dracut-006-3.fc14
[ 1.413434] dracut: rd_NO_LUKS: removing cryptoluks activation
[ 1.421056] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 1.424060] udev[80]: starting version 161
[ 1.516753] dracut: Starting plymouth daemon
[ 1.542543] dracut: rd_NO_DM: removing DM RAID activation
[ 1.548843] dracut: rd_NO_MD: removing MD RAID activation
[ 1.552894] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a
[ 1.552899] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.552905] usb 1-6: Product: Built-in iSight
[ 1.552908] usb 1-6: Manufacturer: Apple Inc.
[ 1.552910] usb 1-6: SerialNumber: CCGAACH6A3DF9KL0
[ 1.676206] ata_generic 0000:00:0a.0: power state changed by ACPI to D0
[ 1.676350] ata_generic 0000:00:0a.0: power state changed by ACPI to D0
[ 1.676889] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
[ 1.676897] alloc irq_desc for 18 on node -1
[ 1.676900] alloc kstat_irqs on node -1
[ 1.676913] ata_generic 0000:00:0a.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
[ 1.676955] ata_generic 0000:00:0a.0: setting latency timer to 64
[ 1.705391] scsi0 : ata_generic
[ 1.734736] scsi1 : ata_generic
[ 1.735127] ata1: PATA max UDMA/100 cmd 0x2298 ctl 0x22a4 bmdma 0x2280 irq 18
[ 1.735133] ata2: PATA max UDMA/100 cmd 0x2290 ctl 0x22a0 bmdma 0x2288 irq 18
[ 1.756044] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 1.756373] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input4
[ 1.758247] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 1.816144] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 1.889386] ata1.00: ATA-8: APPLE SSD TS128C, CJAA0201, max UDMA/100
[ 1.889392] ata1.00: 236978176 sectors, multi 16: LBA48
[ 1.889431] ata1.00: configured for UDMA/100
[ 1.889673] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS128C CJAA PQ: 0 ANSI: 5
[ 1.889936] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.889998] sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
[ 1.890146] sd 0:0:0:0: [sda] Write Protect is off
[ 1.890151] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.890192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.890431] sda: sda1 sda2 sda3 sda4
[ 1.894647] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.015368] usb 3-3: New USB device found, idVendor=05ac, idProduct=0243
[ 2.015375] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.015380] usb 3-3: Product: Apple Internal Keyboard / Trackpad
[ 2.015384] usb 3-3: Manufacturer: Apple Inc.
[ 2.033099] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.0/input/input5
[ 2.033212] apple 0003:05AC:0243.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input0
[ 2.045405] apple 0003:05AC:0243.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-3/input1
[ 2.302108] usb 3-5: new full speed USB device using ohci_hcd and address 3
[ 2.499368] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500
[ 2.499375] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.499381] usb 3-5: Product: BRCM2070 Hub
[ 2.499384] usb 3-5: Manufacturer: Apple Inc.
[ 2.502426] hub 3-5:1.0: USB hub found
[ 2.505367] hub 3-5:1.0: 3 ports detected
[ 2.584955] dracut: Scanning devices sda4 for LVM logical volumes vg_mba31/lv_root vg_mba31/lv_swap
[ 2.603668] dracut: inactive '/dev/vg_mba31/lv_root' [26.53 GiB] inherit
[ 2.603762] dracut: inactive '/dev/vg_mba31/lv_home' [22.66 GiB] inherit
[ 2.603903] dracut: inactive '/dev/vg_mba31/lv_swap' [5.62 GiB] inherit
[ 2.803858] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.805297] usb 3-5.1: new full speed USB device using ohci_hcd and address 4
[ 2.807605] dracut: Mounted root filesystem /dev/mapper/vg_mba31-lv_root
[ 2.848251] dracut: Loading SELinux policy
[ 2.905317] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a
[ 2.905325] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.911832] type=1404 audit(1291300323.357:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 2.914705] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/input/input6
[ 2.914842] generic-usb 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 2.963220] SELinux: 2048 avtab hash slots, 210512 rules.
[ 2.982305] usb 3-5.2: new full speed USB device using ohci_hcd and address 5
[ 3.080307] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b
[ 3.080314] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.083061] SELinux: 2048 avtab hash slots, 210512 rules.
[ 3.090610] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/input/input7
[ 3.090772] generic-usb 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 3.159296] usb 3-5.3: new full speed USB device using ohci_hcd and address 6
[ 3.266318] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b
[ 3.266324] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.266330] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 3.266333] usb 3-5.3: Manufacturer: Apple Inc.
[ 3.420333] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens, 1024 cats
[ 3.420340] SELinux: 77 classes, 210512 rules
[ 3.428753] SELinux: Completing initialization.
[ 3.428757] SELinux: Setting up existing superblocks.
[ 3.428767] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 3.428777] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 3.429751] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 3.429761] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 3.429775] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.429803] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 3.431270] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 3.431277] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 3.434058] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 3.434070] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 3.434076] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 3.434106] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 3.434124] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 3.434143] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 3.434185] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 3.434203] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 3.435395] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 3.435415] SELinux: initialized (dev dm-0, type ext4), uses xattr
[ 3.439638] type=1403 audit(1291300323.886:3): policy loaded auid=4294967295 ses=4294967295
[ 3.753906] dracut: Switching root
[ 3.918114] readahead-collector: starting
[ 4.349722] udev[509]: starting version 161
[ 5.332610] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.878204] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-3/3-3:1.2/input/input8
[ 5.878382] usbcore: registered new interface driver bcm5974
[ 5.914808] Bluetooth: Core ver 2.15
[ 5.915113] NET: Registered protocol family 31
[ 5.915116] Bluetooth: HCI device and connection manager initialized
[ 5.915121] Bluetooth: HCI socket layer initialized
[ 5.951203] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 5.951217] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 5.951306] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 5.965349] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.968414] usbcore: registered new interface driver btusb
[ 5.989682] mbp_nvidia_bl: MacBookAir 3,1 detected
[ 6.042941] Linux video capture interface: v2.00
[ 6.070828] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:850a)
[ 6.085159] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input9
[ 6.085279] usbcore: registered new interface driver uvcvideo
[ 6.085282] USB Video Class driver (v0.1.0)
[ 6.097112] applesmc: Apple MacBook Air 3 detected:
[ 6.097117] applesmc: - Model without accelerometer
[ 6.097119] applesmc: - Model without light sensors and backlight
[ 6.097123] applesmc: - Model with 19 temperature sensors
[ 6.097193] applesmc: device successfully initialized.
[ 6.097740] applesmc: 1 fans found.
[ 6.098059] applesmc: driver successfully loaded.
[ 6.480529] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 6.480893] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 6.481533] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 6.481540] alloc irq_desc for 17 on node -1
[ 6.481544] alloc kstat_irqs on node -1
[ 6.481556] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 6.481560] hda_intel: Disable MSI for Nvidia chipset
[ 6.481773] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 6.820955] ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=2 (0xb/0xa/0x0/0x0/0x0)
[ 6.820963] ALSA sound/pci/hda/hda_codec.c:4439: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.820968] ALSA sound/pci/hda/hda_codec.c:4443: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 6.820974] ALSA sound/pci/hda/hda_codec.c:4444: mono: mono_out=0x0
[ 6.820978] ALSA sound/pci/hda/hda_codec.c:4447: dig-out=0x10/0x0
[ 6.820982] ALSA sound/pci/hda/hda_codec.c:4455: inputs: mic=0xd, fmic=0x0, line=0x0, fline=0x0, cd=0x0, aux=0x0
[ 7.023675] audit: name_count maxed, losing inode data: dev=00:05, inode=10986
[ 7.023723] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.023737] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.023783] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.023798] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.023848] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.023866] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.023987] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.024001] audit: name_count maxed, losing inode data: dev=00:05, inode=9518
[ 7.725782] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 7.977641] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 7.977948] SELinux: initialized (dev sda3, type ext4), uses xattr
[ 7.983676] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.983686] SELinux: initialized (dev dm-2, type ext4), uses xattr
[ 8.564086] Adding 5898236k swap on /dev/mapper/vg_mba31-lv_swap. Priority:-1 extents:1 across:5898236k
[ 8.568868] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 8.666620] readahead-disable-service: delaying service auditd
[ 49.262188] NET: Registered protocol family 10
[ 49.263249] lo: Disabled Privacy Extensions
[ 49.272691] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 51.666432] Bluetooth: L2CAP ver 2.14
[ 51.666436] Bluetooth: L2CAP socket layer initialized
[ 51.678872] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 51.678876] Bluetooth: BNEP filters: protocol multicast
[ 51.687572] Bluetooth: SCO (Voice Link) ver 0.6
[ 51.687576] Bluetooth: SCO socket layer initialized
[ 51.720309] usb 3-5.1: USB disconnect, address 4
[ 51.774969] Bluetooth: RFCOMM TTY layer initialized
[ 51.774978] Bluetooth: RFCOMM socket layer initialized
[ 51.774981] Bluetooth: RFCOMM ver 1.11
[ 51.841298] usb 3-5.2: USB disconnect, address 5
[ 53.111551] nvidia: module license 'NVIDIA' taints kernel.
[ 53.111557] Disabling lock debugging due to kernel taint
[ 54.475218] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 54.475225] alloc irq_desc for 16 on node -1
[ 54.475228] alloc kstat_irqs on node -1
[ 54.475240] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
[ 54.475268] nvidia 0000:02:00.0: setting latency timer to 64
[ 54.475276] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 54.475668] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 Fri Oct 8 11:17:08 PDT 2010
[ 65.084538] fuse init (API version 7.14)
[ 65.123371] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 65.131172] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 68.814641] readahead-collector: starting delayed service auditd
[ 69.713455] readahead-collector: sorting
[ 70.348312] readahead-collector: finished
[ 271.549208] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 271.709456] usb 2-2: New USB device found, idVendor=090c, idProduct=1000
[ 271.709468] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 271.709477] usb 2-2: Product: USB Flash Disk
[ 271.709482] usb 2-2: Manufacturer: General
[ 271.709487] usb 2-2: SerialNumber: 7210090000017044
[ 271.789176] Initializing USB Mass Storage driver...
[ 271.790963] scsi2 : usb-storage 2-2:1.0
[ 271.791461] usbcore: registered new interface driver usb-storage
[ 271.791465] USB Mass Storage support registered.
[ 273.134121] scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
[ 273.142472] sd 2:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[ 273.143348] sd 2:0:0:0: [sdb] Write Protect is off
[ 273.143357] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 273.143364] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 273.144441] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 273.148359] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 273.148370] sdb: sdb1
[ 273.154339] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 273.154345] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 273.447958] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
--
test mailing list
test@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe:
https://admin.fedoraproject.org/mailman/listinfo/test
