Dear folks, Could not report several bugs, will attach errors here: Thanks, Antonio Script started on Wed 03 Nov 2010 05:37:14 PM CDT [root@localhost ~]# startx xauth: creating new authority file /root/.serverauth.1529 X.Org X Server 1.9.1 Release Date: 2010-10-22 X Protocol Version 11, Revision 0 Build Operating System: x86-14 2.6.32-72.el6.bz634452.x86_64 Current Operating System: Linux localhost.localdomain 2.6.35.6-48.fc14.x86_64 #1 SMP Fri Oct 22 15:36:08 UTC 2010 x86_64 Kernel command line: ro root=/dev/mapper/vg_ghse2135-lv_root rd_LVM_LV=vg_ghse2135/lv_root rd_LVM_LV=vg_ghse2135/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us Build Date: 24 October 2010 11:36:35PM Build ID: xorg-x11-server 1.9.1-2.fc15 Current version of pixman: 0.20.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 3 17:37:17 2010 (==) Using config directory: "/etc/X11/xorg.conf.d" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Backtrace: 0: /usr/bin/X (xorg_backtrace+0x2d) [0x483065] 1: /usr/bin/X (0x400000+0x52cb2) [0x452cb2] 2: /lib64/libc.so.6 (0x7f552b4b9000+0x340e0) [0x7f552b4ed0e0] 3: /usr/lib64/libdrm_nouveau.so.1 (nouveau_channel_alloc+0x4d) [0x7f5529907ced] 4: /usr/lib64/xorg/modules/drivers/nouveau_drv.so (0x7f5529b0b000+0xd43d) [0x7f5529b1843d] 5: /usr/lib64/xorg/modules/drivers/nouveau_drv.so (0x7f5529b0b000+0xde28) [0x7f5529b18e28] 6: /usr/bin/X (AddScreen+0x144) [0x42b29d] 7: /usr/bin/X (InitOutput+0xb53) [0x45f76a] 8: /usr/bin/X (0x400000+0x21385) [0x421385] 9: /lib64/libc.so.6 (__libc_start_main+0xfd) [0x7f552b4d7e7d] 10: /usr/bin/X (0x400000+0x210a9) [0x4210a9] Segmentation fault at address 0x7 Fatal server error: Caught signal 11 (Segmentation fault). Server aborting Please consult the Fedora Project support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ^Cgiving up. xinit: Connection refused (errno 111): unable to connect to X server xinit: No such process (errno 3): unexpected signal 2. [root@localhost ~]# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35.6-48.fc14.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Fri Oct 22 15:36:08 UTC 2010 [ 0.000000] Command line: ro root=/dev/mapper/vg_ghse2135-lv_root rd_LVM_LV=vg_ghse2135/lv_root rd_LVM_LV=vg_ghse2135/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ee0000 (usable) [ 0.000000] BIOS-e820: 0000000037ee0000 - 0000000037ee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000037ee3000 - 0000000037ef0000 (ACPI data) [ 0.000000] BIOS-e820: 0000000037ef0000 - 0000000037f00000 (reserved) [ 0.000000] BIOS-e820: 0000000038000000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x37ee0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f3ac0] f3ac0 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037ee0000 [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037ee0000 page 4k [ 0.000000] kernel direct mapping tables up to 37ee0000 @ 16000-19000 [ 0.000000] RAMDISK: 37256000 - 37ed0000 [ 0.000000] ACPI: RSDP 00000000000f7b00 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 0000000037ee3000 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0000000037ee3080 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20100428/tbfadt-557) [ 0.000000] ACPI: DSDT 0000000037ee3100 05D62 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0000000037ee0000 00040 [ 0.000000] ACPI: SSDT 0000000037ee8f40 002CC (v01 GATEWA SYSTEM 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 0000000037ee9240 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0000000037ee9280 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0000000037ee8e80 00098 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037ee0000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000037ee0000 [ 0.000000] NODE_DATA [0000000001e43100 - 0000000001e570ff] [ 0.000000] bootmap [0000000001e58000 - 0000000001e5efdf] pages 7 [ 0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 0037ee0000] [ 0.000000] #0 [0001000000 - 0001e42878] TEXT DATA BSS ==> [0001000000 - 0001e42878] [ 0.000000] #1 [0037256000 - 0037ed0000] RAMDISK ==> [0037256000 - 0037ed0000] [ 0.000000] #2 [0001e43000 - 0001e430cb] BRK ==> [0001e43000 - 0001e430cb] [ 0.000000] #3 [00000f3ad0 - 0000100000] BIOS reserved ==> [00000f3ad0 - 0000100000] [ 0.000000] #4 [00000f3ac0 - 00000f3ad0] MP-table mpf ==> [00000f3ac0 - 00000f3ad0] [ 0.000000] #5 [000009f000 - 00000f1ef4] BIOS reserved ==> [000009f000 - 00000f1ef4] [ 0.000000] #6 [00000f2030 - 00000f3ac0] BIOS reserved ==> [00000f2030 - 00000f3ac0] [ 0.000000] #7 [00000f1ef4 - 00000f2030] MP-table mpc ==> [00000f1ef4 - 00000f2030] [ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] [ 0.000000] #10 [0000016000 - 0000017000] PGTABLE ==> [0000016000 - 0000017000] [ 0.000000] #11 [0001e43100 - 0001e57100] NODE_DATA ==> [0001e43100 - 0001e57100] [ 0.000000] #12 [0001e58000 - 0001e5f000] BOOTMAP ==> [0001e58000 - 0001e5f000] [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002800000-ffff8800035fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037ee0 [ 0.000000] On node 0 totalpages: 228975 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3077 pages used for memmap [ 0.000000] DMA32 zone: 221915 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880002000000 s90496 r8192 d24192 u524288 [ 0.000000] pcpu-alloc: s90496 r8192 d24192 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 225740 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: ro root=/dev/mapper/vg_ghse2135-lv_root rd_LVM_LV=vg_ghse2135/lv_root rd_LVM_LV=vg_ghse2135/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 7812000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 873328k/916352k available (4548k kernel code, 452k absent, 42572k reserved, 7261k data, 944k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 9175040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2712.526 MHz processor. [ 0.001009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5425.05 BogoMIPS (lpj=2712526) [ 0.001421] pid_max: default: 32768 minimum: 301 [ 0.002030] Security Framework initialized [ 0.002245] SELinux: Initializing. [ 0.002456] SELinux: Starting in permissive mode [ 0.002645] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.003704] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004286] Mount-cache hash table entries: 256 [ 0.004675] Initializing cgroup subsys ns [ 0.004884] Initializing cgroup subsys cpuacct [ 0.005008] Initializing cgroup subsys memory [ 0.005227] Initializing cgroup subsys devices [ 0.005434] Initializing cgroup subsys freezer [ 0.005638] Initializing cgroup subsys net_cls [ 0.005842] Initializing cgroup subsys blkio [ 0.006041] tseg: 0037f00000 [ 0.006044] CPU: Physical Processor ID: 0 [ 0.006247] CPU: Processor Core ID: 0 [ 0.006449] mce: CPU supports 5 MCE banks [ 0.006661] using C1E aware idle routine [ 0.007003] Performance Events: AMD PMU driver. [ 0.007230] ... version: 0 [ 0.007432] ... bit width: 48 [ 0.007635] ... generic registers: 4 [ 0.007838] ... value mask: 0000ffffffffffff [ 0.008002] ... max period: 00007fffffffffff [ 0.008207] ... fixed-purpose events: 0 [ 0.008411] ... event mask: 000000000000000f [ 0.008910] ACPI: Core revision 20100428 [ 0.016008] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.016219] ftrace: allocating 23839 entries in 94 pages [ 0.018118] Setting APIC routing to flat [ 0.019467] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.029879] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.030999] Booting Node 0, Processors #1 [ 0.101067] Brought up 2 CPUs [ 0.101470] Total of 2 processors activated (10849.75 BogoMIPS). [ 0.101857] sizeof(vma)=184 bytes [ 0.101858] sizeof(page)=56 bytes [ 0.101860] sizeof(inode)=584 bytes [ 0.101861] sizeof(dentry)=192 bytes [ 0.101863] sizeof(ext3inode)=800 bytes [ 0.101864] sizeof(buffer_head)=104 bytes [ 0.101865] sizeof(skbuff)=240 bytes [ 0.101867] sizeof(task_struct)=5944 bytes [ 0.102059] devtmpfs: initialized [ 0.107529] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.107768] Time: 17:34:58 Date: 11/03/10 [ 0.108033] NET: Registered protocol family 16 [ 0.108353] node 0 link 0: io port [8000, ffff] [ 0.108356] TOM: 0000000040000000 aka 1024M [ 0.108562] node 0 link 0: mmio [a0000, bffff] [ 0.108565] node 0 link 0: mmio [40000000, efffffff] [ 0.108568] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.108571] node 0 link 0: mmio [f0000000, f03fffff] [ 0.108573] bus: [00, 04] on node 0 link 0 [ 0.108576] bus: 00 index 0 [io 0x0000-0xffff] [ 0.108578] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.108580] bus: 00 index 2 [mem 0x40000000-0xf3ffffff] [ 0.108582] bus: 00 index 3 [mem 0xf4000000-0xfcffffffff] [ 0.108596] ACPI: bus type pci registered [ 0.108865] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.109002] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.113195] PCI: Using configuration type 1 for base access [ 0.114409] bio: create slab <bio-0> at 0 [ 0.115963] ACPI: EC: Look up EC in DSDT [ 0.120463] ACPI: Interpreter enabled [ 0.120671] ACPI: (supports S0 S3 S4 S5) [ 0.120977] ACPI: Using IOAPIC for interrupt routing [ 0.129828] ACPI: No dock devices found. [ 0.130004] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.131527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04]) [ 0.133575] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored) [ 0.133578] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored) [ 0.133580] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored) [ 0.133582] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored) [ 0.133585] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored) [ 0.133588] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored) [ 0.133590] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.133593] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xefffffff] (ignored) [ 0.133595] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored) [ 0.133740] pci 0000:00:01.0: reg 18: [io 0x1d00-0x1dff] [ 0.133769] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.133778] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.133782] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f] [ 0.133800] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.133805] pci 0000:00:01.1: PME# disabled [ 0.133849] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.133869] pci 0000:00:02.0: supports D1 D2 [ 0.133871] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133874] pci 0000:00:02.0: PME# disabled [ 0.133895] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.133919] pci 0000:00:02.1: supports D1 D2 [ 0.133921] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133924] pci 0000:00:02.1: PME# disabled [ 0.133978] pci 0000:00:05.0: reg 10: [mem 0xfe024000-0xfe027fff] [ 0.134005] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.134008] pci 0000:00:05.0: PME# disabled [ 0.134038] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.134068] pci 0000:00:07.0: reg 10: [mem 0xfe02d000-0xfe02dfff] [ 0.134071] pci 0000:00:07.0: reg 14: [io 0xec00-0xec07] [ 0.134091] pci 0000:00:07.0: supports D1 D2 [ 0.134093] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134097] pci 0000:00:07.0: PME# disabled [ 0.134115] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7] [ 0.134118] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.134122] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977] [ 0.134125] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73] [ 0.134128] pci 0000:00:08.0: reg 20: [io 0xd800-0xd80f] [ 0.134131] pci 0000:00:08.0: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.134157] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7] [ 0.134160] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3] [ 0.134164] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967] [ 0.134167] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63] [ 0.134170] pci 0000:00:08.1: reg 20: [io 0xc400-0xc40f] [ 0.134173] pci 0000:00:08.1: reg 24: [mem 0xfe02b000-0xfe02bfff] [ 0.134214] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134216] pci 0000:00:09.0: PME# disabled [ 0.134246] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134248] pci 0000:00:0b.0: PME# disabled [ 0.134275] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.134277] pci 0000:00:0c.0: PME# disabled [ 0.134292] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.134296] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.134301] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit] [ 0.134305] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.134383] PCI: peer root bus 00 res updated from pci conf [ 0.134427] pci 0000:00:04.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.134638] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.134641] pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.134644] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.134647] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.134649] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.134652] pci 0000:00:04.0: bridge window [mem 0x40000000-0xf3ffffff] (subtractive decode) [ 0.134655] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xfcffffffff] (subtractive decode) [ 0.134674] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.134880] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] [ 0.134883] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.134886] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.134904] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.135003] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.135005] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.135008] pci 0000:00:0b.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.135027] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.135233] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff] [ 0.135235] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.135239] pci 0000:00:0c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.135250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.136133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.178663] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.179315] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180112] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.180829] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.181551] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.182118] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.182835] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.183694] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.184315] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 0.184814] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.185655] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.186119] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.186622] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.187119] ACPI: PCI Interrupt Link [LPMU] (IRQs *5 7 9 10 11 14 15) [ 0.187620] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.188119] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.188621] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.189317] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.189818] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.190456] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.190914] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.191374] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.191833] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.192157] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.192619] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.193156] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.193614] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.194155] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0 [ 0.194633] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.195115] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.195594] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0 [ 0.196077] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0 [ 0.196556] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0 [ 0.197040] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.197518] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 0.198021] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.198522] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0 [ 0.198958] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0 [ 0.199278] HEST: Table is not found! [ 0.199562] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none [ 0.199949] vgaarb: loaded [ 0.200108] SCSI subsystem initialized [ 0.200336] libata version 3.00 loaded. [ 0.200336] usbcore: registered new interface driver usbfs [ 0.200336] usbcore: registered new interface driver hub [ 0.201019] usbcore: registered new device driver usb [ 0.201239] PCI: Using ACPI for IRQ routing [ 0.201260] PCI: pci_cache_line_size set to 64 bytes [ 0.201320] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.201323] reserve RAM buffer: 0000000037ee0000 - 0000000037ffffff [ 0.201440] NetLabel: Initializing [ 0.201643] NetLabel: domain hash size = 128 [ 0.202001] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.202219] NetLabel: unlabeled traffic allowed by default [ 0.202491] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.202705] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.203002] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.206030] Switching to clocksource hpet [ 0.217946] pnp: PnP ACPI init [ 0.218186] ACPI: bus type pnp registered [ 0.223205] pnp: PnP ACPI: found 13 devices [ 0.223409] ACPI: ACPI bus type pnp unregistered [ 0.223626] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.223833] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.224049] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.224255] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.224463] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.224670] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.224876] system 00:01: [io 0x2000-0x207f] has been reserved [ 0.225090] system 00:01: [io 0x2080-0x20ff] has been reserved [ 0.225301] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.225508] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.225713] system 00:02: [io 0x0290-0x030f] has been reserved [ 0.225919] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.226138] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.226347] system 00:0c: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.226556] system 00:0c: [mem 0xfeff0000-0xfeff00ff] has been reserved [ 0.226763] system 00:0c: [mem 0x37ee0000-0x37efffff] could not be reserved [ 0.226971] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.227185] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.227394] system 00:0c: [mem 0x00100000-0x37edffff] could not be reserved [ 0.227600] system 00:0c: [mem 0x38000000-0x3fffffff] has been reserved [ 0.227810] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.228025] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.228232] system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.228440] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.228647] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.228855] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.235319] pci 0000:00:0d.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref] [ 0.235707] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.235912] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff] [ 0.236125] pci 0000:00:04.0: bridge window [mem 0xfd700000-0xfd7fffff] [ 0.236332] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.236717] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.236921] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] [ 0.237133] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.237342] pci 0000:00:09.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.237727] pci 0000:00:0b.0: PCI bridge to [bus 03-03] [ 0.237931] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff] [ 0.238143] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff] [ 0.238351] pci 0000:00:0b.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.238738] pci 0000:00:0c.0: PCI bridge to [bus 04-04] [ 0.238942] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff] [ 0.239154] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff] [ 0.239362] pci 0000:00:0c.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.239755] pci 0000:00:04.0: setting latency timer to 64 [ 0.239760] pci 0000:00:09.0: setting latency timer to 64 [ 0.239765] pci 0000:00:0b.0: setting latency timer to 64 [ 0.239769] pci 0000:00:0c.0: setting latency timer to 64 [ 0.239772] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.239774] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] [ 0.239777] pci_bus 0000:00: resource 6 [mem 0x40000000-0xf3ffffff] [ 0.239779] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xfcffffffff] [ 0.239782] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.239784] pci_bus 0000:01: resource 1 [mem 0xfd700000-0xfd7fffff] [ 0.239786] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.239788] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.239791] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff] [ 0.239793] pci_bus 0000:01: resource 6 [mem 0x40000000-0xf3ffffff] [ 0.239796] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xfcffffffff] [ 0.239798] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.239800] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.239803] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.239805] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff] [ 0.239807] pci_bus 0000:03: resource 1 [mem 0xfdb00000-0xfdbfffff] [ 0.239810] pci_bus 0000:03: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref] [ 0.239812] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff] [ 0.239815] pci_bus 0000:04: resource 1 [mem 0xfd900000-0xfd9fffff] [ 0.239817] pci_bus 0000:04: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref] [ 0.239851] NET: Registered protocol family 2 [ 0.240137] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.240833] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.242647] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.243493] TCP: Hash tables configured (established 131072 bind 65536) [ 0.243703] TCP reno registered [ 0.243918] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.244150] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.244485] NET: Registered protocol family 1 [ 0.257019] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.257268] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.257526] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.257782] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.258045] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.258305] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.258568] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.258835] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.259051] pci 0000:00:0d.0: Boot video device [ 0.259062] PCI: CLS 64 bytes, default 64 [ 0.259138] Trying to unpack rootfs image as initramfs... [ 0.566084] Freeing initrd memory: 12776k freed [ 0.576079] audit: initializing netlink socket (disabled) [ 0.576311] type=2000 audit(1288805698.575:1): initialized [ 0.587472] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.589215] VFS: Disk quotas dquot_6.5.2 [ 0.589464] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.590124] msgmni has been set to 1730 [ 0.590398] SELinux: Registering netfilter hooks [ 0.590805] alg: No test for stdrng (krng) [ 0.591094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.591487] io scheduler noop registered [ 0.591690] io scheduler deadline registered [ 0.591933] io scheduler cfq registered (default) [ 0.592355] pcieport 0000:00:09.0: setting latency timer to 64 [ 0.592371] alloc irq_desc for 40 on node 0 [ 0.592373] alloc kstat_irqs on node 0 [ 0.592382] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X [ 0.592488] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.592500] alloc irq_desc for 41 on node 0 [ 0.592502] alloc kstat_irqs on node 0 [ 0.592506] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X [ 0.592588] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.592600] alloc irq_desc for 42 on node 0 [ 0.592602] alloc kstat_irqs on node 0 [ 0.592607] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X [ 0.592700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.592929] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.593159] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.593710] pci-stub: invalid id string "" [ 0.594093] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.594490] ACPI: Power Button [PWRB] [ 0.594757] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.595156] ACPI: Power Button [PWRF] [ 0.595410] ACPI: Fan [FAN] (on) [ 0.595844] ACPI: acpi_idle registered with cpuidle [ 0.599543] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20100428/nspredef-1059) [ 0.600173] ACPI: Expecting a [Reference] package element, found type 0 [ 0.600379] ACPI: Invalid passive threshold [ 0.600902] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.601119] ACPI: Thermal Zone [THRM] (32 C) [ 0.601349] ERST: Table is not found! [ 0.601852] Non-volatile memory driver v1.3 [ 0.602063] Linux agpgart interface v0.103 [ 0.602335] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.846143] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.846640] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.848103] brd: module loaded [ 0.848916] loop: module loaded [ 0.849312] Fixed MDIO Bus: probed [ 0.849574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.850183] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.850395] alloc irq_desc for 22 on node 0 [ 0.850398] alloc kstat_irqs on node 0 [ 0.850407] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.855401] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.855404] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.855712] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.856131] ehci_hcd 0000:00:02.1: debug port 1 [ 0.856341] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.856368] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 0.862018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.862249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.862455] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.862839] usb usb1: Product: EHCI Host Controller [ 0.863052] usb usb1: Manufacturer: Linux 2.6.35.6-48.fc14.x86_64 ehci_hcd [ 0.863258] usb usb1: SerialNumber: 0000:00:02.1 [ 0.863568] hub 1-0:1.0: USB hub found [ 0.863775] hub 1-0:1.0: 10 ports detected [ 0.864086] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.864635] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.864842] alloc irq_desc for 21 on node 0 [ 0.864844] alloc kstat_irqs on node 0 [ 0.864852] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.865258] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.865260] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.865515] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.865936] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 0.919043] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.919250] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919633] usb usb2: Product: OHCI Host Controller [ 0.919838] usb usb2: Manufacturer: Linux 2.6.35.6-48.fc14.x86_64 ohci_hcd [ 0.920052] usb usb2: SerialNumber: 0000:00:02.0 [ 0.920350] hub 2-0:1.0: USB hub found [ 0.920556] hub 2-0:1.0: 10 ports detected [ 0.920842] uhci_hcd: USB Universal Host Controller Interface driver [ 0.921140] PNP: No PS/2 controller found. Probing ports directly. [ 0.921764] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.921973] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.922246] mice: PS/2 mouse device common for all mice [ 0.922633] rtc_cmos 00:05: RTC can wake from S4 [ 0.922886] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.923145] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.923417] device-mapper: uevent: version 1.0.3 [ 0.923771] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@xxxxxxxxxx [ 0.924275] cpuidle: using governor ladder [ 0.924477] cpuidle: using governor menu [ 0.924935] usbcore: registered new interface driver hiddev [ 0.925166] usbcore: registered new interface driver usbhid [ 0.925372] usbhid: USB HID core driver [ 0.925607] nf_conntrack version 0.5.0 (6922 buckets, 27688 max) [ 0.925937] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 0.926331] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 0.926716] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 0.926989] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.927215] TCP cubic registered [ 0.927417] Initializing XFRM netlink socket [ 0.927628] NET: Registered protocol family 17 [ 0.927958] PM: Resume from disk failed. [ 0.927975] registered taskstats version 1 [ 0.928386] Magic number: 2:89:592 [ 0.928694] rtc_cmos 00:05: setting system clock to 2010-11-03 17:34:59 UTC (1288805699) [ 0.929130] Initalizing network drop monitor service [ 0.929409] Freeing unused kernel memory: 944k freed [ 0.930185] Write protecting the kernel read-only data: 10240k [ 0.930653] Freeing unused kernel memory: 1576k freed [ 0.932058] Freeing unused kernel memory: 1836k freed [ 0.950703] dracut: dracut-006-3.fc14 [ 0.957188] dracut: rd_NO_LUKS: removing cryptoluks activation [ 0.965940] udev[98]: starting version 161 [ 1.026234] [drm] Initialized drm 1.1.0 20060810 [ 1.058372] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 20 [ 1.058584] alloc irq_desc for 20 on node 0 [ 1.058586] alloc kstat_irqs on node 0 [ 1.058598] nouveau 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 20 (level, low) -> IRQ 20 [ 1.058989] nouveau 0000:00:0d.0: setting latency timer to 64 [ 1.063431] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation card (0x04c000a2) [ 1.065513] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image from PRAMIN [ 1.104016] [drm] nouveau 0000:00:0d.0: ... appears to be valid [ 1.104230] [drm] nouveau 0000:00:0d.0: BIT BIOS found [ 1.104435] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.20 [ 1.104641] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1 [ 1.104848] [drm] nouveau 0000:00:0d.0: BIT table 'd' not found [ 1.105060] [drm] nouveau 0000:00:0d.0: Found Display Configuration Block version 3.0 [ 1.105452] [drm] nouveau 0000:00:0d.0: Raw DCB entry 0: 01000310 00000023 [ 1.105659] [drm] nouveau 0000:00:0d.0: Raw DCB entry 1: 00110204 97dd0000 [ 1.105868] [drm] nouveau 0000:00:0d.0: DCB connector table: VHER 0x30 5 10 2 [ 1.106084] [drm] nouveau 0000:00:0d.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 1.106477] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at offset 0xDCAA [ 1.106867] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= [ 1.107266] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ======= [ 1.107699] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at offset 0xDE01 [ 1.108091] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at offset 0xDE02 [ 1.108529] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at offset 0xDF84 [ 1.108916] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at offset 0xDFCD [ 1.109314] [drm] nouveau 0000:00:0d.0: Detected 128MiB VRAM [ 1.109568] [TTM] Zone kernel: Available graphics memory: 445230 kiB. [ 1.109774] [TTM] Initializing pool allocator. [ 1.110941] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture) [ 1.111224] [drm] nouveau 0000:00:0d.0: Saving VGA fonts [ 1.145934] [drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!! [ 1.146933] [drm] nouveau 0000:00:0d.0: Allocating FIFO number 0 [ 1.147333] [drm] nouveau 0000:00:0d.0: nouveau_channel_alloc: initialised FIFO 0 [ 1.147700] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga encoder (output 0) [ 1.273710] [drm] nouveau 0000:00:0d.0: allocated 1366x768 fb: 0x48000, bo ffff880037b9cc00 [ 1.274356] fbcon: nouveaufb (fb0) is primary device [ 1.339380] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga encoder (output 0) [ 1.339384] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on CRTC 0 using output A [ 1.340313] Console: switching to colour frame buffer device 170x48 [ 1.341605] fb0: nouveaufb frame buffer device [ 1.341612] drm: registered panic notifier [ 1.341623] Slow work thread pool: Starting up [ 1.341755] Slow work thread pool: Ready [ 1.341767] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:0d.0 on minor 0 [ 1.354407] dracut: Starting plymouth daemon [ 1.428026] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.482965] dracut: rd_NO_DM: removing DM RAID activation [ 1.489952] dracut: rd_NO_MD: removing MD RAID activation [ 1.615090] pata_amd 0000:00:06.0: version 0.4.1 [ 1.615153] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.623050] usb 2-1: New USB device found, idVendor=045e, idProduct=0737 [ 1.623072] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.623083] usb 2-1: Product: Compact Optical Mouse 500 [ 1.623092] usb 2-1: Manufacturer: Microsoft [ 1.636377] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2 [ 1.636527] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:02.0-1/input0 [ 1.642161] scsi0 : pata_amd [ 1.648123] scsi1 : pata_amd [ 1.648890] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.648902] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.650888] sata_nv 0000:00:08.0: version 3.5 [ 1.651326] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 1.651351] alloc irq_desc for 23 on node 0 [ 1.651353] alloc kstat_irqs on node 0 [ 1.651366] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.651659] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.652963] scsi2 : sata_nv [ 1.653552] scsi3 : sata_nv [ 1.654044] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 1.654246] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 1.654864] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 1.655094] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 1.655380] sata_nv 0000:00:08.1: setting latency timer to 64 [ 1.655443] scsi4 : sata_nv [ 1.657132] scsi5 : sata_nv [ 1.657716] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 [ 1.657721] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23 [ 1.813076] ata2: port disabled. ignoring. [ 1.897139] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 1.972303] ata5: SATA link down (SStatus 0 SControl 300) [ 2.090038] usb 2-2: New USB device found, idVendor=1c4f, idProduct=0002 [ 2.090297] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.090531] usb 2-2: Product: USB Keykoard [ 2.090758] usb 2-2: Manufacturer: USB [ 2.100342] input: USB USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3 [ 2.100728] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:02.0-2/input0 [ 2.123039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.126226] ata3.00: ATA-7: ST3250410AS, 4.AAA, max UDMA/133 [ 2.126524] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.132219] ata3.00: configured for UDMA/133 [ 2.132733] scsi 2:0:0:0: Direct-Access ATA ST3250410AS 4.AA PQ: 0 ANSI: 5 [ 2.133348] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.133382] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.133442] sd 2:0:0:0: [sda] Write Protect is off [ 2.133446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.133470] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.133713] sda: sda1 sda2 sda3 sda4 < sda5 > [ 2.154569] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.589047] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.592126] ata4.00: ATAPI: ATAPI iHAS120 6, 7L0F, max UDMA/100 [ 2.598135] ata4.00: configured for UDMA/100 [ 2.600319] scsi 3:0:0:0: CD-ROM ATAPI iHAS120 6 7L0F PQ: 0 ANSI: 5 [ 2.606564] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.606868] Uniform CD-ROM driver Revision: 3.20 [ 2.607330] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.607425] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.920300] ata6: SATA link down (SStatus 0 SControl 300) [ 12.108044] drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 12.108375] generic-usb 0003:1C4F:0002.0003: timeout initializing reports [ 12.108812] input: USB USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input4 [ 12.109393] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:02.0-2/input1 [ 12.145115] dracut: Scanning devices sda5 for LVM logical volumes vg_ghse2135/lv_root vg_ghse2135/lv_swap [ 12.184841] dracut: inactive '/dev/vg_ghse2135/lv_root' [50.00 GiB] inherit [ 12.185317] dracut: inactive '/dev/vg_ghse2135/lv_home' [130.44 GiB] inherit [ 12.185675] dracut: inactive '/dev/vg_ghse2135/lv_swap' [1.72 GiB] inherit [ 12.497568] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 12.524950] dracut: Mounted root filesystem /dev/mapper/vg_ghse2135-lv_root [ 12.609790] dracut: Loading SELinux policy [ 12.846619] type=1404 audit(1288805711.416:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 12.970047] SELinux: 2048 avtab hash slots, 206201 rules. [ 13.030118] SELinux: 2048 avtab hash slots, 206201 rules. [ 13.521334] SELinux: 9 users, 14 roles, 3446 types, 180 bools, 1 sens, 1024 cats [ 13.521338] SELinux: 77 classes, 206201 rules [ 13.525834] SELinux: Completing initialization. [ 13.525837] SELinux: Setting up existing superblocks. [ 13.525851] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 13.525859] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 13.526570] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 13.526579] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 13.526591] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 13.526608] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 13.527753] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 13.527761] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 13.529580] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 13.529591] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 13.529596] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 13.529616] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 13.529632] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 13.529641] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 13.529667] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 13.529676] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 13.530461] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 13.530480] SELinux: initialized (dev dm-0, type ext4), uses xattr [ 13.533302] type=1403 audit(1288805712.103:3): policy loaded auid=4294967295 ses=4294967295 [ 14.165435] dracut: Switching root [ 14.702173] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 14.703875] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.708063] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.708740] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.710668] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.711359] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.713241] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.716043] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.716718] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.718596] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.720083] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 14.740195] init[1]: systemd 11 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT; fedora) [ 14.927995] NET: Registered protocol family 10 [ 14.928643] lo: Disabled Privacy Extensions [ 14.945809] init[1]: Set hostname to <localhost.localdomain>. [ 15.315446] init[1]: [/lib/systemd/system/prefdm.service:18] Failed to parse service restart specifier, ignoring: restart-always [ 15.831432] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 15.833336] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 15.833931] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 15.834460] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 15.841650] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 16.784219] udev[477]: starting version 164 [ 16.811369] init[1]: readahead-collect.service: main process exited, code=exited, status=1 [ 16.813355] init[1]: readahead-replay.service: main process exited, code=exited, status=1 [ 16.815308] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 17.313516] microcode: microcode: CPU0: AMD CPU family 0xf not supported [ 17.313766] microcode: microcode: CPU1: AMD CPU family 0xf not supported [ 17.314590] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 17.389402] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 17.690281] EDAC MC: Ver: 2.1.0 Oct 22 2010 [ 17.690980] i2c i2c-1: nForce2 SMBus adapter at 0x1c00 [ 17.691336] i2c i2c-2: nForce2 SMBus adapter at 0xf400 [ 17.807565] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 17.808272] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 17.808492] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 17.808710] forcedeth 0000:00:07.0: setting latency timer to 64 [ 18.051818] EDAC amd64_edac: Ver: 3.3.0 Oct 22 2010 [ 18.173369] parport_pc 00:0a: reported by Plug and Play ACPI [ 18.173694] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 18.304681] ppdev: user-space parallel port driver [ 18.321441] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 00:21:97:ed:5d:84 [ 18.321712] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 18.322135] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 18.322395] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 18.322396] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 18.322398] (Note that use of the override may cause unknown side effects.) [ 18.324113] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 18.371606] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 18.371881] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 18.372158] hda_intel: Disable MSI for Nvidia chipset [ 18.372598] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 18.676873] ALSA sound/pci/hda/patch_realtek.c:1308: SKU: Nid=0x1d sku_cfg=0x4004c601 [ 18.676878] ALSA sound/pci/hda/patch_realtek.c:1310: SKU: port_connectivity=0x1 [ 18.676881] ALSA sound/pci/hda/patch_realtek.c:1311: SKU: enable_pcbeep=0x0 [ 18.676884] ALSA sound/pci/hda/patch_realtek.c:1312: SKU: check_sum=0x00000004 [ 18.676886] ALSA sound/pci/hda/patch_realtek.c:1313: SKU: customization=0x000000c6 [ 18.676889] ALSA sound/pci/hda/patch_realtek.c:1314: SKU: external_amp=0x0 [ 18.676891] ALSA sound/pci/hda/patch_realtek.c:1315: SKU: platform_type=0x0 [ 18.676893] ALSA sound/pci/hda/patch_realtek.c:1316: SKU: swap=0x0 [ 18.676896] ALSA sound/pci/hda/patch_realtek.c:1317: SKU: override=0x1 [ 18.685016] hda_codec: ALC662 rev1: BIOS auto-probing. [ 18.685288] ALSA sound/pci/hda/hda_codec.c:4435: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 18.685291] ALSA sound/pci/hda/hda_codec.c:4439: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 18.685295] ALSA sound/pci/hda/hda_codec.c:4443: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 18.685298] ALSA sound/pci/hda/hda_codec.c:4444: mono: mono_out=0x0 [ 18.685300] ALSA sound/pci/hda/hda_codec.c:4447: dig-out=0x1e/0x0 [ 18.685303] ALSA sound/pci/hda/hda_codec.c:4455: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 [ 18.796022] ALSA sound/pci/hda/patch_realtek.c:1358: realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d [ 18.796027] ALSA sound/pci/hda/patch_realtek.c:1374: realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0662 [ 20.677482] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 21.217616] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 21.226421] SELinux: initialized (dev sda3, type ext4), uses xattr [ 21.288498] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 21.288859] SELinux: initialized (dev dm-2, type ext4), uses xattr [ 22.914635] Adding 1802236k swap on /dev/mapper/vg_ghse2135-lv_swap. Priority:-1 extents:1 across:1802236k [ 22.918957] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 23.247473] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 24.726537] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 33.880282] init[1]: Unit readahead-collect.service entered failed state. [ 34.551666] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 cpu cores) (version 2.20.00) [ 34.552138] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x9 [ 34.552445] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa [ 34.553143] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc [ 34.553869] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe [ 34.554591] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 34.555293] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 34.555970] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 35.001142] Clocksource tsc unstable (delta = -67142223 ns) [ 37.228070] alloc irq_desc for 43 on node 0 [ 37.228081] alloc kstat_irqs on node 0 [ 37.228107] forcedeth 0000:00:07.0: irq 43 for MSI/MSI-X [ 37.749980] RPC: Registered udp transport module. [ 37.750438] RPC: Registered tcp transport module. [ 37.750816] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 38.121825] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 39.573557] [drm] nouveau 0000:00:0d.0: unknown parameter 15 [ 39.587429] [drm] nouveau 0000:00:0d.0: unknown parameter 15 [ 48.034063] eth0: no IPv6 routers present [ 138.904222] [drm] nouveau 0000:00:0d.0: unknown parameter 15 [ 138.908566] [drm] nouveau 0000:00:0d.0: unknown parameter 15 [root@localhost ~]# cat /etc/fedora-release Fedora release 15 (Rawhide) [root@localhost ~]# cat /[K[K[K[K[Kuname -r 2.6.35.6-48.fc14.x86_64 [root@localhost ~]# exit exit Script done on Wed 03 Nov 2010 05:37:35 PM CDT -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
