On 08/13/2010 12:12 AM, Patrick Lists wrote: > On 08/12/2010 10:43 PM, Adam Williamson wrote: >> On Thu, 2010-08-12 at 22:35 +0200, François Cami wrote: >> >>> OK here on RV410 (Radeon X700 Pro, R400 family), using KMS. >>> I will be testing older cards (Radeon 7500, FireGL 8800) as time permits. >> >> Thanks, Francois! Jerome mentioned he has a reproducer now, a specific >> monitor, but the testing is still useful to help us figure out how wide >> the impact of this is. > > Also tested a box with a Gigabyte X58 board and an ATI HD 5970 PCI-E > card and when X starts the screen goes black then I see a popup from the > monitor that no signal was detected. Then nothing. The screen stays > black and the led on the monitor goes orange which is basically saying > it's got nothing to do. The monitor is an Iiyama Prolite B2409 HDS > connected via a DVI cable. Maybe the output of lspci -v of the card is of use: 09:00.0 Display controller: ATI Technologies Inc Device 689c Subsystem: ATI Technologies Inc Device 2042 Flags: bus master, fast devsel, latency 0, IRQ 55 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fb6e0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 8e00 [size=256] Expansion ROM at fb600000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: radeon Kernel modules: radeon Will also try radeon.modeset=0 and report back. Regards, Patrick -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
