I made a typo: On 08/09/10 10:35, Joachim Backes wrote: > Hi, > > I have 3 SATA disks on my box with 3 installed systems: > > /dev/sda with windows7 on /dev/sda1, /dev/sdb for data and /dev/sdc for > 2 Fedora systems: /dev/sdb5 with F13 and /dev/sdb7 with a fresh /dev/sdb5 should be /dev/sdc5 and /dev/sdb7 should be /dev/sdc7 > installed F14/Rc1. > > My F14 runs properly. Now I wanted to install under F14 grub again on > the boot disk /dev/sda (grub-install /dev/sda), and it seemed to be OK. > But if trying to boot, Win7 no more could be booted (no boot record found). > > Booting back to F13 and reinstalling grub with the identical > grub-install command and booting again: Win7 could be booted. > > /boot/grub/grub.conf are identical in F13 and F14. > > Now I found out, that the usage of *--force-lba* in grub-install > produced a clean bootloader on /dev/sda, so I could boot Win7 with a > boot loader generated in F14. > > What I not understand is the fact, that under F13 --force-lba is *not > needed*, but seems to be needed on F14. > > My board: ASRock ConRoe1333-DVI/H > > Kind regards > > Joachim Backes <joachim.backes@xxxxxxxxxxxxxx> > > http://www.rhrk.uni-kl.de/~backes > > -- Joachim Backes <joachim.backes@xxxxxxxxxxxxxx> http://www.rhrk.uni-kl.de/~backes
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
-- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
