On Thu, Apr 15, 2010 at 2:49 AM, Chris Kloiber <ckloiber@xxxxxxxxxxxx> wrote: > So I thought I'd give this installation method a whirl (inside VirtualBox) > but it fails every time. Usually died at: > > gPXE 0.9.9+ -- Open Source Boot Firmware -- http://etherboot.org > Features: HTTP DNS TFTP AoE iSCSI bzImage COMBOOT ELF Multiboot PXE PXEXT > > Attempting to start boot.fedoraproject.org > Setting up networking... > > static.gpxe: 325 bytes [script] [LOADED] > Opening first network interface ... > If you don't have DHCP, then hit Control+C to cancel > DHCP (net0 08:00:27:99:6e:d4).... ok > Here we go! > http://serverbeach1.fedoraproject.org/pub/alt/bfo/pxelinux.0. > PXELINUX 3.75 2009-04-16 Copyright (C) 1994-2009 H. Peter Anvin et al > !PXE entry point found (we hope) at 9C59:044A via plan A > UNDI code segment at 9C59 len 0814 > UNDI data segment at 9CDB len 2E48 > Getting cached packet 01 02 03 > My IP address seems to be C0A82039 192.168.32.57 > ip=192.168.32.57:192.168.37.9:192.168.32.1:255.255.254.0 > TFTP prefix: http://serverbeach1.fedoraproject.org/pub/alt/bfo/ > Trying to load: pxelinux.cfg/default > > Is this expected to work at this point? > > -- > Chris Kloiber > > > > -- > test mailing list > test@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe: > https://admin.fedoraproject.org/mailman/listinfo/test > yes, for me works what are your network card ? -- ------------ Itamar Reis Peixoto -- test mailing list test@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test
